ACOUSTIC AUDIO 5.1 Multimedia Speaker
System User Manual

ACOUSTIC AUDIO AAT1000 5.1 Multimedia Speaker System User Manual

Package Contents:

– (1) Sub-woofer Cabinet
– (4) Tower Satellite Speakers
– (1) Horizontal Center Speaker
– (1) Remote Control
– (1) User Manual
– (3) RCA Cable
– (1) 3.5mm RCA Cable

Specifications:

– Power Audio: 1000 Watts Total System Power
– Drive Units: Two front and two rear 3-way tower speakers, one 3-way bookshelf center speaker, one powered LED extreme bass subwoofer ACOUSTIC AUDIO
– Frequency Response: 20 – 20,000 Hz
– Power Supply: 11 0V
– Dimensions (H x W x D):
Sub-woofer-15.25″x l0″x 14.25″
Tower Satellites – 43″ x 3.5″ x 2.5″ and 9″ round base
Center Satellite – 3.6″ x 12″ x 2.25″

Features:

– Built In Bluetooth Receiver
– 5.1 channel multimedia speaker for computer, home system, game console, mobile device, etc.
– Full audio spectrum performances, ideal for your Favorite entertainment such as MP3, MP4, CD/DVD movies and digital playbacks
– Specially designed woofer cabinet for extreme bass and resolution
– Comes with remote control, 3 RCA stereo connection cables, 1 AUX cable ACOUSTIC AUDIO

Assembly of Tower Speakers

Satellite tower speakers come unassembled to avoid damage while shipping. Please read the following instructions carefully to assemble the tower speakers.

Package Includes:
– (4) tower speakers w/ built in bolts
– (1) center speakers
– (4) silver poles
– (4) tower bases w/ black and silver cover
– (4) small washers
– (4) black bolts
– (3) 6 ft. speaker wires
– (2) 12 ft. speaker wires

You will need:
1 Philips-head screwdriver

*Note: if you are missing any pieces, please contact the dealer where you purchased the product ACOUSTIC AUDIO

  1. Connect the base to the silver pole by placing the washer on the bottom of the base aligned with the hole in the center. Push the bolt through the washer and the hole on the bottom of the base. Place pole on the top of the base, placing the slots inside the pole through the slots on the base. Hold pole in place attached to base and start screwing the bolt into the ridged hole of the pole. Finish and tighten with a Philips-head screwdriver. ACOUSTIC AUDIO
  2. Once base and pole are connected, screw the speaker into the pole, using the built in bolt until tight.
  3. Use 6 ft. speaker wire to connect 2 tower speakers (FL and FR) and 1 center channel (CEN) to their respective inputs on the back of the subwoofer. Make sure the wire is inputted correctly on the back of the speaker (red [positive] is used for the positive speaker wire, indicated by markings on the wire and black [negative] is used for the negative speaker wire).
  4. Use 12 ft. speaker wire to connect 2 tower speakers (SL and SR) to their respective inputs on the back of the subwoofer, making sure wire is inputted correctly on the back of the speaker (see step 4).
  5. Once all speakers are connected, position the FL and FR speakers in front of the listener facing inward and CEN speaker atop or in front of the subwoofer. Position SL and SR speakers behind the listener facing inward. Power ON system. See page 7 for troubleshooting help. To use FL,FR and CEN speakers only use 2.1 mode. To use all 5 speakers use 5.1 surround mode. ACOUSTIC AUDIO

Front Panel

ACOUSTIC AUDIO AAT1000 5.1 Multimedia Speaker System User Manual - Front Panel

How to use Bluetooth:

  1. Use input button to select Bluetooth mode
  2. Search Bluetooth device for “AAT1000”
  3. Connect to Bluetooth
  4. If a password is required, enter “0000” ACOUSTIC AUDIO
  • 1. VOLUME KNOB/ MODE SELECTOR: Use this knob to both control the master volume and select your preferred mode (DVD, USB, SD, BT or AUX). Turn left to decrease the volume, right to increase the volume and compress the knob to change the mode.
  • 2. ST-BY: When the system is switched on the LED display will read “–”. Press “ST-BY” to bring the system to ready. Once you press “ST-BY” the system will go to its default mode and volume. ACOUSTIC AUDIO
  • 3. 5.1 /2.1 : The system will default to 2.1 mode, utilizing only 3 of the 5 speakers. Press “5.1 / 2.1 “to switch to 5.1 surround mode, utilizing all 5 speakers.
  • 4. ACOUSTIC AUDIO AAT1000 5.1 Multimedia Speaker System User Manual - Previous track icon : Press” ACOUSTIC AUDIO AAT1000 5.1 Multimedia Speaker System User Manual - Previous track icon ” to go to the previous track in USB/SD mode.
  • 5. ACOUSTIC AUDIO AAT1000 5.1 Multimedia Speaker System User Manual - Next track icon : Press” ACOUSTIC AUDIO AAT1000 5.1 Multimedia Speaker System User Manual - Next track icon ” to go to the next track in USB/SD mode.
  • 6. ►II : Press” ►II “to play or pause the current track
  • 7. USB/SD: inputs for USB cord or SD card
  • 8. MIC 1 and MIC 2: inputs for 2 separate wired microphones ACOUSTIC AUDIO

Using The Remote Control

ACOUSTIC AUDIO AAT1000 5.1 Multimedia Speaker System User Manual - Using the remote control

  1. SD: use to change to SD mode
  2. USB: use to change to USB mode
  3. BT: use to change to Bluetooth mode
  4. PREVIOUS: use to go to the previous track
  5. LED LIGHT: use to change LED light mode or turn off
  6. FL-/+: volume control for FL speaker
  7. SW-/+: volume control for Sub
  8. SL-/+ : volume control for SL speaker
  9. REPEAT: repeat current track
  10. MC-/+: volume control formic
  11. ST-BY: use to power on/off system
  12. 5.1 /2.1: use to change from 2.1 to 5.1 surround mode
  13. DVD : use to change to DVD mode
  14. AUX: use to change to AUX mode
  15. SLEEP: use to set sleep timer for system
  16. NEXT: use to go to the next track
  17. PLAY /PAUSE: use to play or pause current song
  18. FR-/+: volume control for FR speaker
  19. VOL-/+: master volume control
  20. CEN-/+: volume control for CEN speaker
  21. SR-/+: volume control for SR speaker
  22. 0-9 numbers
  23. RESET: use to reset all sound to default
  24. ECHO : use to control the depth of the echo effect ACOUSTIC AUDIO

Rear Panel

ACOUSTIC AUDIO AAT1000 5.1 Multimedia Speaker System User Manual - Rear Panel

  1. AC Power Supply Cord
  2. POWER ON-OFF
  3. AUX Audio Input
  4. DVD Audio Input
  5. Audio Output

FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1) This device may not cause harmful interference, and (2) this device must accept any interference received , including interference that may cause undesired operation. ACOUSTIC AUDIO

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of t he FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Th is equipment generates uses and can radiate rad ion frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If t his equipment does cause harmful interference to rad ion or television reception , which ca n be determined by turn ing the equipment off and on, t he user is encouraged to try to correct the interference by one or more of the following measures. ACOUSTIC AUDIO

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an out let on a circuit different from that to which t he receiver is connected.
– Consult the dealer or an experienced radio / TV technician for help.

* RF warning for Mobile device :
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ACOUSTIC AUDIO

System Connections

ACOUSTIC AUDIO AAT1000 5.1 Multimedia Speaker System User Manual - System Connections

  1. Insert all satellite speaker cables into their respective output sockets located at the rear of the sub-woofer. (FL : Front Left Speaker, FR: Front Right Speaker, SL: Surround Left Speaker, SR : Surround Right Speaker, CEN : Center Speaker ACOUSTIC AUDIO
  2. For 5.1 surround sound, insert audio cables from your device into the respective DVD speaker sockets located at the rear of the sub-woofer above the satellite speaker sockets.
  3. For dimensional sound, insert audio cable into respective AUX socket.
  4. Once you’ve connected the system in your preferred method, insert the power plug into -120V wall outlet and switch power to ON.

Note: Please avoid leaving magnetic objects near the system ACOUSTIC AUDIO

Troubleshooting

System is not powering on?
– Switch power button on and verify if the LED indicator is illuminated
– Confirm that the AC plug is plugged in and that there is power to that outlet. ACOUSTIC AUDIO

Speaker(s) do(es) not produce sound?
– Verify the system is getting power and check above steps
– Make sure the volume is turned up to an audible listening level and your device is not on mute.
– Verify that all cables are plugged into the correct jacks
– Try connecting your system to another device. If the system works correctly with the other device, then your first device is most likely the cause of the problem.

Sound is distorted or not clear?
– Low quality compressed music files will increase the distortion and noise that are easily noticed with amplified speakers. Recheck the sound quality with a non compressed music file.
– Check the device level and decrease the volume if necessary. You should never have your audio source volume above 90% volume level to minimize distortion.

ACOUSTIC AUDIO AAT1000 5.1 Multimedia Speaker System User Manual - Speaker System

Download PDF

Download ACOUSTIC AUDIO 5.1 Multimedia Speaker System User Manual PDF

Leave a comment

Your email address will not be published.