Audio-Technica ATH-SQ1TW Wireless Headphones User Manual

Audio-Technica ATH-SQ1TW Wireless Headphones
User Manual

Safety precautions

Although this product was designed to be used safely, failing to use it correctly may result in an accident. To ensure safety, observe all warnings and cautions while using the product.

Cautions for the headphones

• Do not use the product near medical equipment. Radio waves may affect cardiac pacemakers and medical electronic equipment. Do not use the product inside medical facilities.
• When using the product in aircraft, follow airline instructions.
• Do not use the product near automatic control devices such as automatic doors and fire alarms. Radio waves may affect electronic equipment and cause accidents due to malfunction.
• Do not disassemble, modify or attempt to repair the product to avoid electric shock, malfunction or fire.
• Do not subject the product to strong impact to avoid electric shock, malfunction or fire.
• Do not handle the product with wet hands to avoid electric shock or injury.
• Disconnect the product from a device if the product begins to malfunction, producing smoke, odor, heat, unwanted noise or showing other signs of damage. In such a case, contact your local Audio-Technica dealer.
• Do not allow the product to get wet to avoid electric shock or malfunction.
• Do not put foreign matter such as combustible materials, metal, or liquid in the product.
• Do not cover the product with a cloth to avoid fire or injury by overheating.
• Follow applicable laws regarding mobile phone and headphone use if using headphones while driving.
• Do not use the product in places where the inability to hear ambient sound presents a serious risk (such as at railroad crossings, train stations, and construction sites).
• The product effectively shields external sound, so you may not hear sound around you clearly while wearing the product. Adjust the volume to a level where you can still hear background sound and monitor the area around you while listening to music.
• Store the product out of the reach of small children.
• To prevent damage to your hearing, do not raise the volume too high. Listening to loud sound for an extended period may cause temporary or permanent hearing loss.
• Discontinue use if skin irritation results from direct contact with the product.
• If you begin to feel unwell while using the product, discontinue use immediately.
• When removing the product from your ears, check to make sure the eartips are still attached to the main unit. If the eartips become lodged in your ears and you are unable to remove them, consult a physician at once.
• If you develop an itch from wearing the product, discontinue use.

Cautions for charging case

• Do not disassemble, modify or attempt to repair the product to avoid electric shock, malfunction or fire.
• Do not subject the product to strong impact to avoid electric shock, malfunction or fire.
• Do not handle the product with wet hands to avoid electric shock or injury.
• Disconnect the product from a device if the product begins to malfunction, producing smoke, odor, heat, unwanted noise or showing other signs of damage. In such a case, contact your local Audio-Technica dealer.
• Do not allow the product to get wet to avoid electric shock or malfunction.
• Do not put foreign matter such as combustible materials, metal, or liquid in the product.
• Do not cover the product with a cloth to avoid fire or injury by overheating.
• When charging, make sure to use the included USB charging cable.
• Do not charge with devices that have quick-charge functionality (with a voltage of 5 V or more). Doing so may cause the product to malfunction.
• Do not store the product in direct sunlight, near heating devices, or in hot, humid, or dusty places because such storage could cause malfunction or defect.
• Do not put the product close to fire because that could cause deformation or malfunction.
• Do not use benzine, paint thinners and electrical contact cleaner, etc. because use of such material could cause deformation or malfunction.

Cautions for rechargeable battery

The headphones and charging case are equipped with a rechargeable battery (lithium-ion battery).

• If battery fluid gets into eyes, do not rub them. Rinse thoroughly with clean water such as tap water and consult a doctor immediately.
• If battery fluid leaks, do not touch fluid with bare hands. If fluid remains inside the product, it may cause malfunction. If battery fluid leaks, contact your local Audio-Technica dealer.
  –   If fluid gets in your mouth, gargle thoroughly with clean water such as tap water and consult a doctor immediately.
  –   If your skin or clothing comes in contact with fluid, immediately wash the affected skin or clothing with water. If you experience skin irritation, consult a doctor.
• To avoid leakage, generation of heat or explosion:
  –  Never heat, disassemble or modify the battery, nor dispose of it in a fire.
  –  Do not attempt to pierce with a nail, hit with a hammer or step on the battery.
  –  Do not drop the product or subject it to strong impact.
  –  Do not get the battery wet.
• Do not use, leave or store the battery in the following places:
  –  Area exposed to direct sunlight or high temperatures and humidity
  –  Inside of a car under the blazing sun
  –  Near heat sources such as heat registers
• Charge only with the included USB cable to avoid malfunction or fire.
• The internal rechargeable battery of this product cannot be replaced by the user. The battery may have reached the end of its service life if the usage time becomes significantly shorter even after the battery has been fully charged. If this is the case, the battery needs to be repaired. Contact your local Audio-Technica dealer for repair details.
• When the product is disposed of, the built-in rechargeable battery needs to be discarded properly. Contact your local Audio-Technica dealer to learn how to properly dispose of the battery.

For customers in the USA

FCC Notice

Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution

You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter used in other systems.

RF Exposure Statement

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR).

Contact

Responsible Company: Audio-Technica U.S., Inc.
Address: 1221 Commerce Drive, Stow, Ohio 44224, USA
Tel: 330-686-2600

For customers in Canada

ISED statement

CAN ICES-3 (B)/NMB-3(B)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. This device complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment.

Notes on use

• Be sure to read the connected device’s user manual before use.
• Audio-Technica will not be liable in any way for any loss of data in the unlikely event that such losses should occur while using the product.
• On public transportation or in other public places, keep the volume low so as not to disturb other people.
• Minimize the volume on your device before connecting the product.
• When using the product in a dry environment, you may feel a tingling sensation in your ears. This is caused by static electricity accumulated on your body, not by product malfunction.
• Do not subject the product to strong impact.
• Do not store the product in direct sunlight, near heating devices, or in hot, humid, or dusty places. Additionally, do not allow the product to get wet.
• When the product is used for a long time, the product may become discolored due to ultraviolet light (especially direct sunlight) and wear.
• If the charging case is placed in a bag while the USB charging cable is still connected, the USB charging cable may become caught, severed, or broken.
• Make sure to hold the plug when connecting and disconnecting the USB charging cable. The USB charging cable may become severed or an accident may occur if you pull on the cable itself.
• When you are not using the USB charging cable, disconnect it from the charging case.
• Do not charge the battery if the terminal of the USB charging cable is bent, loose, or damaged. Doing so may cause heat generation, smoke emission, fire or electric shock.
• When charging the headphones, close the cover of the charging case before charging.
• When you are not using the product, store it in the included charging case.
• If you use eartips other than those included, the headphones may not fit into the charging case, or may not charge. Be sure to use the included eartips.
• When using the product, select the eartips that fit your ears best, and wear the product securely.
• This product can be used to talk on the phone only when using a mobile telephone network. Support for telephony apps that use a mobile data network is not guaranteed.
• If you use the product near an electronic device or transmitter (such as a mobile phone), unwanted noise may be heard. In this case, move the product away from the electronic device or transmitter.
• If you use the product near a TV or radio antenna, noise may be seen or heard in the television or radio signal. In this case, move the product away from the TV or radio antenna.
• To protect the built-in rechargeable battery, charge it at least once every 6 months. If too much time passes between charges, the life of the rechargeable battery may be reduced, or the rechargeable battery may no longer be able to be charged.
• Do not charge the product if water or foreign matter is inside the battery jack or USB charging cable. Doing so may cause corrosion, heat generation, smoke, fire, or other malfunction or electric shock in the battery jack or USB charging cable.
• Charge the product in a well-ventilated place (10 to 35°C (50 to 95°F)) away from direct sunlight. Otherwise, the battery may deteriorate, possibly resulting in shorter periods of continuous use or may fail to charge.
• If the headphones are wet, wipe them with a dry cloth before placing them in the charging case. The charging case is not water-resistant (drip-proof). Do not charge the product if the headphones are wet.
• The hear-through mode of the product allows you to hear the sounds around you through the built-in microphone. Depending on the volume of the music being played back, the surrounding sounds may be difficult to hear. In this case, turn down the volume of the music.
• Depending on your surroundings, the ambient sounds may be difficult to hear even when using the product’s hear through mode. Do not use the product in places that are dangerous if you cannot hear the surrounding sounds, such as places with heavy traffic.
• Operate the touch sensor with one finger. Operating with a sharp-tipped object, such as a ballpoint pen or pencil, may result not only in incorrect operation, but also damage to the touch sensor.
• Do not touch the touch sensor with your fingertips. Doing so may cause your fingernail to break.
• If the product does not operate at all or as intended when touched, check to make sure that your other fingers, parts of your hand, or clothing items are not in contact when touching. Also, the product may not operate correctly if you are wearing gloves or if your fingertips are too dry.
• The product may not operate correctly if the touch sensor is dirty from sweat. Remove the dirt before operating the product.

About water-resistant (drip-proof) performance

• The water-resistant (drip-proof) specification of this product applies only to the headphones, not the charging case.
• Although the headphones have water-resistant (drip-proof) capabilities equivalent to IPX4, the part where the sound comes from is not water-resistant (drip-proof).
• The water-resistant (drip-proof) performance is designed to protect the headphones if they get wet from rain, etc. (equivalent to IPX4). JIS/IEC protection grade IPX4 means that the product is protected against exposure to flying water from all directions.
• The headphones cannot be used underwater.
• The headphones cannot be used in hot and humid places, such as bathrooms.
• The headphones are not waterproof. Submerging them in water may cause damage.
• The headphones may not function properly if they become wet. Wipe the headphones with a dry cloth, shake them multiple times to remove any excess water, and allow the headphones to dry thoroughly before use.

For a more comfortable Bluetooth communication
experience

The effective communication range of this product varies depending on obstructions and radio wave conditions. For a more enjoyable experience, please use the product as close as possible to the Bluetooth device. To minimize noise and sound disruptions, avoid placing your body or other obstacles between the product’s antenna and the Bluetooth device.

Part names and functions

Headphones

1. Indicator lamps (L/R (left/right) indicator)
   Displays the operating status and battery level of the headphones.
2. Touch sensors
   Use to play/pause music, answer phone calls, and adjust sound volume. Alternatively, use to operate specific functions such as turning on/off hear-through mode or low latency mode.
3. Microphones

• 📖 The microphone on the L (left) side has a protrusion for distinguishing between the left and right headphones.

Charging case

1. Cover
2. Battery jack
   Use to connect the included USB charging cable and charge the product.
3. Charging indicator lamp
   Lights/flashes when charging the charging case

Accessories

1. USB charging cable (30 cm (12″), USB Type-A / USB Type-C ™)
2. Eartips (XS, S, M, L)
   At the time of purchase, the M-size eartips are attached to the product.

Charging the battery

• Fully charge the battery when using for the first time.
• When the rechargeable battery is running low, the voice guidance will play the message “Low battery”, and the indicator lamp will flash in red. Charge the battery as soon as possible.
• It takes about 1.5 hours to fully charge the headphones, and about 2 hours to fully charge the charging case. (Charging times may vary depending on usage conditions.)
• Charge the product in a well-ventilated place (10 to 35 °C (50 to 95°F)) away from direct sunlight. Otherwise, the battery may deteriorate, possibly resulting in shorter periods of continuous use or may fail to charge.

Charging the headphones and charging case

1. Connect the included USB charging cable (USB Type-C side) to the battery jack of the charging case.

• The included USB charging cable is designed for exclusive use with the product. Do not use any other USB charging cable.
• When inserting the USB charging cable into the USB port or battery jack, insert it directly (horizontally).

2. After placing the headphones in the charging case, close the cover.

3. Connect the included USB charging cable (USB Type-A side) to the computer to start charging.

• While charging, the indicator lamp lights/flashes as follows. (It may take several seconds for the indicator lamp to light.)

[1] Charge the product in a well-ventilated place (10 to 35°C (50 to 95°F)) away from direct sunlight.

4. When charging is complete, disconnect the USB charging cable (USB Type-A side) from the computer.

5. Disconnect the USB charging cable (USB Type-C side) from the battery jack on the charging case.

• ℹ️ When charging, make sure to use the included USB charging cable. The product may not charge with cables other than the included USB charging cable.

Charging headphones without the USB charging cable

A rechargeable battery is built into the charging case. If you have charged the charging case, you can charge the headphones without using the USB charging cable.

1. Place the headphones in the charging case and close the cover.

• While charging, the indicator lamps light as follows. (It may take several seconds for the indicator lamps to light.)

Power supply ON/OFF

Turning on the product

1. Remove the headphones from the charging case.

The power will turn on automatically, and the indicator lamps will light in white and then flash.
Voice guidance is played.

• 📖It may take several seconds for the indicator lamps to light.
• 📖See “Voice guidance” (p. 26) for more information on voice guidance.

Turning off the product

1. Place the headphones in the charging case.

The power will turn off automatically.

Connecting via Bluetooth

To connect the product to a Bluetooth device, the product needs to pair (register) with the device.

Pairing a Bluetooth device

• Read the user manual for the Bluetooth device.
• Place the Bluetooth device within 1 m (3.3′) of the product to perform pairing correctly.
• Wear the headphones to hear voice guidance during pairing.

1. Remove the headphones (L (left) and R (right)) from the charging case.

• The indicator lamps will light in white, and then flash. (Depending on the order the L (left) and R (right) side headphones are removed from the charging case, the indicator lamp on one side will flash white quickly, and the other will flash white slowly.)

2. Use your Bluetooth device to begin the pairing process and search for the product. When your Bluetooth device finds the product, “ATH-SQ1TW” will be displayed on the device.

• For information about using your Bluetooth device, refer to the device’s user manual.

3. Select “ATH-SQ1TW” to pair the product and your Bluetooth device.

• Some devices may ask for a passkey. In this case, enter “0000”. The passkey may also be called a passcode, PIN code, PIN number, or password.

The voice guidance will play the message “Bluetooth connected” when pairing is complete. The indicator lamps will begin flashing slowly in white.

Pairing with Fast Pair

In one touch, the product enables quick, effortless Bluetooth pairing with your Android devices. You can even check to see where you last placed it.

1. Turn on the Bluetooth function on an Android device configured with a Google account. 

2 Remove the headphones (L (left) and R (right)) from the charging case and bring them close to the Android device.

• Be sure to remove both headphones (L (left) and R (right)) from the charging case. No notification will appear on the Android device if only one headphone is removed.

3. Touch the pairing notification that appears on your Android device.

The voice guidance will play the message “Bluetooth connected” when pairing is complete. The indicator lamps will begin flashing slowly in white.

About pairing

When connecting a new Bluetooth device, you need to pair it with the product. Once the Bluetooth device and the product are paired, you do not need to pair them again. The product supports multi pairing, in which a connection history is saved. However, in the following cases you will need to pair again even if the Bluetooth device was paired once:

• If the product is deleted from the Bluetooth device’s connection history.
• If the product is sent out for repair.
• If the product is reset.

Wearing the product

Insert the side of the product marked “L” (left) into the left ear and the side marked “R” (right) into the right ear.

• If you have difficulty inserting the headphones, adjust the position as desired by rotating the headphones backward.

Touch sensors

The product has touch sensors. When performing operations, touch the sensors using the pad of your finger, not the fingertip.

• ℹ️ Operate the touch sensor with one finger. Operating with a sharp-tipped object, such as a ballpoint pen or pencil, may result not only in incorrect operation, but also damage to the touch sensor.
• ℹ️ Do not touch the touch sensor with your fingertips. Doing so may cause your fingernail to break.
• ℹ️ If the product does not operate at all or as intended when touched, check to make sure that your other fingers, parts of your hand, or clothing items are not in contact when touching. Also, the product may not operate correctly if you are wearing gloves or if your fingertips are too dry.
• ℹ️ The product may not operate correctly if the touch sensor is dirty from sweat. Remove the dirt before operating the product.

Unlocking

When you take the headphones out of the charging case, the touch sensor is locked to prevent erroneous operations. Touch the touch sensors once to unlock the sensors, signaled by the confirmation tone.

• 📖The sensor is automatically unlocked during calls on the Bluetooth device (for both outgoing and incoming calls).

Using the product

The product can use Bluetooth wireless technology to connect to your device and play music, receive phone calls, etc. Use the product for whichever of these purposes suits your needs. Note that Audio-Technica cannot guarantee the operation of displays, such as the battery level display, or applications via Bluetooth devices.

Listening to music

• To connect for the first time, pair the product and your device via Bluetooth wireless technology. If you have already paired the product and your Bluetooth device, turn on the Bluetooth device’s Bluetooth connection before turning on the product.
• Use your Bluetooth device to start playback, referring to the device’s user manual as necessary.

1. Remove the headphones from the charging case and place them in your ears.
2. Touch the touch sensors on the L (left) and R (right) headphones once to unlock.
3. Start playback on your Bluetooth device.
4. Touch the touch sensor on the L (left) side headphone once or twice in a row to adjust the volume (up or down).

5. To pause music, touch the touch sensor on the R (right) side headphone.

• Playback will be started or paused with every touch.
• 📖 Listening to music is also possible with only one headphone by removing only one side from the charging case and putting it in your ear. When you use only one headphone, some functions are not available depending on which side is worn. Use the Bluetooth device for operation in such cases.

R (right) side headphone touch sensor operations

• The controls explained above may not be available on some smartphones

L (left) side headphone touch sensor operations

[1] A beep is heard each time the volume is increased/decreased by 1 level.
[2] The volume control of some Bluetooth devices may not work well with the product.

• The controls explained above may not be available on some smartphones.

Talking on the phone

If your Bluetooth device supports telephone features, you can use the product to talk on the phone.

1. Remove the headphones from the charging case and place them in your ears.
2. Make/receive calls with your Bluetooth device.

• When your Bluetooth device receives a phone call, the product sounds a ringtone.
• If a call is received while you are listening to music, music playback is paused.

3 Touch the touch sensor on the headphones (L (left) or R (right) side) to answer incoming calls.

• Calls can be answered from either the L (left) or R (right) side headphone.

4 Touch the touch sensor on the L (left) side headphone once or twice in a row to adjust the volume (up or down).

5 To end a call, touch and hold (about 2 seconds) the touch sensor on the L (left) or R (right) side headphone.

• Calls can be ended from either the L (left) or R (right) side headphone.
• If the call was received while listening to music, playback is resumed.
• Music playback may not be resumed on some Bluetooth devices. In this case, music playback must be started manually.

• 📖Making/receiving calls is also possible with only one headphone by removing only one side from the charging case and putting it in your ear. When you use only one headphone, some functions are not available depending on which side is worn. Use the Bluetooth device for operation in such cases.

R (right) side headphone touch sensor operations

• The controls explained above may not be available on some smartphones.

L (left) side headphone touch sensor operations

• The controls explained above may not be available on some smartphones.

Hear-through mode

This function allows you to hear surrounding sound via the built-in microphone while you listen to music.

1. Touch and hold (about 2 seconds) the touch sensor on the R (right) side headphone.

• ℹ️ Occasionally it may be difficult to hear surrounding sound depending on the volume of the music, etc. that you are playing. In this case, turn down the volume of the music.
• ℹ️ Even when using hear-through mode with this product, surrounding sounds may be difficult to hear depending on the surrounding situation, etc. Do not use the product in places that are dangerous if you cannot hear the surrounding sounds, such as places with heavy traffic.
• ℹ️ When hear-through mode is turned ON, do not cover the microphone part with your hand. If you do so, a loud sound (howling) will be emitted, and it may adversely affect your hearing ability.

Low latency mode

Low latency mode reduces sound delay when playing games or watching videos.

• Bluetooth communication can be easily affected by obstacles and radio wave conditions. Turn this mode off in such situations.

1. Touch and hold (about 3 seconds) the touch sensor on the L (left) side headphone.

• Low latency mode cannot be switched ON/OFF during a call.

Auto power off function

The product automatically turns off after 5 minutes of not being connected to a device.

Indicator lamp display

Pairing

Connecting

Battery level

Voice guidance

Cleaning

Get into the habit of regularly cleaning the product to ensure that it will last for a long time. Do not use alcohol, paint thinners, or other solvents for cleaning purposes.

• Wipe any dirt off the headphones and charging case with a dry cloth. The headphones may not operate correctly if the headphones are wet. Wipe the headphones with a dry cloth, shake them multiple times to remove any excess water, and allow the headphones to dry thoroughly before use.
• Immediately wipe off sweat or any other moisture from the charging case battery jack, the headphone charging terminals, and the touch sensors. Failure to do so may result in a malfunction due to corrosion.
• Natural oils from the skin are particularly likely to build up on the eartip attachment parts (see figure). If these areas are not cleaned, the eartips can become detached. Clean them regularly. Do not touch the areas where sound is produced as they are delicate. Doing so may result in malfunction.
• If any moisture remains in the holes near the microphones (see figure), place the headphones on a dry cloth and shake several times to remove any moisture, and then allow the headphones to dry thoroughly before use.
• Wipe away any perspiration or dirt from the USB charging cable with a dry cloth immediately after use. Failure to clean the cable may cause it to deteriorate and harden over time, resulting in malfunction.
• If the USB terminal of the charging cable is dirty, wipe it off with a dry cloth.
• Clean the eartips by removing them from the headphones and manually cleaning them with a diluted mild detergent. After cleaning, dry before using again.
• ℹ️ If the product will not be used for an extended period of time, store it in a well-ventilated place free from high temperatures and humidity.

Eartips

Eartip size

The product includes silicone eartips in 4 sizes (XS, S, M, and L). At the time of purchase, the M-size silicone eartips are attached. To ensure the best sound quality, select the eartip size that is best suited for you, and adjust the eartips inside your ears for a snug fit. It may be difficult to hear bass sounds if the eartips do not fit snugly in your ears.

Replacing the eartips

Remove the old eartip and attach the new eartip by pushing it onto the headphone at an angle. Push firmly on the eartip so that the inside of the eartip expands, and push the eartip onto the post as far as it will go.

• 📖 Eartips are consumable parts that degrade through storage and use. If the eartips are loose and easily removed or if they appear to have degraded, purchase replacements.
• ℹ️ Periodically remove and clean the eartips as they become dirty easily. Using dirty eartips may cause the headphones themselves to become dirty, resulting in deteriorated sound quality.
• ℹ️ When reattaching eartips that were previously removed, be sure to check that they are securely attached. Injury or illness may occur if the eartips become detached and are left inside the ear.

Resetting

If the product operates abnormally (reset)

Reset the product if it cannot be unpaired, connected, or does not operate as expected.

1. About 5 seconds after both headphones (L (left) and R (right) sides) are placed in the charging case (with battery remaining), touch the touch sensor of both headphones twice in a row.
2. Verify that the indicator lamps on both headphones flash white, and then touch and hold (about 6 seconds) the touch sensor on both headphones while in the charging case. When the indicator lamps on both headphones light in red, reset is complete.
3. Remove the product from the list of registered devices on your Bluetooth device.
4. Remove the headphones from the charging case again and perform pairing.

• 📖If the procedure cannot be completed as expected, remove the headphones again and repeat the procedure from the beginning.

Troubleshooting

❓Power is not supplied

• Charge the product

❓Unable to pair

• Confirm that the Bluetooth device communicates using Ver. 2.1+EDR or higher.
• Place the product and the Bluetooth device within 1 m (3.3′) of each other.
• Set the profiles for the Bluetooth device. For procedures on how to set profiles, refer to the Bluetooth device’s user manual.
• Remove the pairing information for the Bluetooth device then pair the product with this device again.
• Place the headphones in the charging case and close the cover, then remove the headphones and perform the operation again.
• Make sure you are not connected to any other previously connected Bluetooth device. If so, disconnect the product using the previously connected Bluetooth device, and then select the product on the Bluetooth device being connected to.
• Reset the product if it cannot be unpaired, connected, or does not operate as expected even after trying all other solutions. For details, refer to “Resetting” (p. 29).

❓No sound is heard / Sound is faint

• Turn on the power of the product and the Bluetooth device.
• Turn up the volume on the product and the Bluetooth device.
• Make sure that the product and Bluetooth device are connected by the A2DP (or audio connection).
• Disable pairing for the product and the Bluetooth device, then pair the product with this device again.
• Move away from obstacles between the product and the Bluetooth device, such as people, metal, or walls, and place the product and device closer together.
• Switch the sound output of the Bluetooth device to the product.

❓Sound only comes out of one headphone

• Make sure there is battery level remaining.
• Place the headphones in the charging case and close the cover, then remove the headphones and perform the operation again.

❓Sound is distorted / Noise is heard / Sound cuts out

• Turn down the volume on the product and the Bluetooth device.
• Keep the product away from devices that emit radio waves such as microwaves and wireless routers.
• Keep the product away from TVs, radios, and devices with built-in tuners. These devices can also be affected by the product.
• Turn off the equalizer settings of the Bluetooth device.
• Remove obstacles between the product and the Bluetooth device and place them closer together. For details, refer to “For a more comfortable Bluetooth communication experience” (p. 8).

❓Cannot hear the voice of the caller / Voice of the caller is too quiet

• Turn on the power of the product and the Bluetooth device.
• Turn up the volume on the product and the Bluetooth device.
• Confirm that the product and Bluetooth device are connected via HFP/HSP (or phone connection).
• Disable pairing for the product and the Bluetooth device, then pair the product with this device again.
• Switch the sound output of the Bluetooth device to the product.

❓Charging case cannot be charged

• Securely connect the included USB charging cable and charge the product.
• Charge the product in a well-ventilated place (10 to 35°C (50 to 95°F)) away from direct sunlight.

❓Headphones cannot be charged

• Make sure that the product is placed in the charging case correctly.
• Make sure to close the charging case cover when charging.
• Charge the charging case.
• Wipe dirt off the charging terminal with a dry cloth.

• 📖For details about how to operate your Bluetooth device, refer to the device’s user manual.

Specifications

Headphones

Microphone

Communication specifications

Other

[1] The figures above depend on operating conditions.
[2] Headphones only.

• For product improvement, the product is subject to modification without notice.

Trademarks

• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Audio-Technica Corporation is under license. Other trademarks and trade names are those of their respective owners.
• USB Type-C ™ is a trademark of USB Implementers Forum.
• Google is a trademark of Google LLC.

Audio-Technica Corporation
2-46-1 Nishi-naruse, Machida, Tokyo 194-8666, Japan
www.audio-technica.com
©2021 Audio-Technica Corporation
Global Support Contact: www.at-globalsupport.com

Download Manual PDF

Audio-Technica ATH-SQ1TW Wireless Headphones
User Manual PDF Download