JSTOON Nv-3186 Digital Night Vision
Goggles User Manual

JSTOON Nv-3186 Digital Night Vision Goggles User Guide

[email protected]

Product Overview

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Product Overview

Battery Installation

  1. Open the battery cover, install 6 * 1.5V Alkaline batteries into the battery slot, and make sure the battery polarity is installed correctly.
    The detailed installation method can follow the battery card.
    Tips: The battery specifications should meet the requirements and have sufficient power.
  2. Close the battery cover. JSTOON Nv-3186 Digital Night Vision Goggles

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Battery Installation

Inserting Memory Card JSTOON Nv

  1. Insert the Micro Memory card into the slot before use.
    Make sure the direction is right.
  2. Remove the installed memory card, press the edge of the memory card in gently, and it will come out.
    Tips: Storage capacity between 4GB and 32GB is recommended.

Note: The device will show “No Card” if the memory card is not installed properly.

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Inserting Memory Card

Turn on the device

Power On Press the power button for about 3 seconds to start the night vision device. JSTOON Nv-3186 Digital Night Vision Goggles

Photo Mode

Turn on the device, if not in photo mode, please press [MODE] button to switch to photo mode.

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Photo Mode

Video Mode

Taking a video the default is video mode. If not, press the [MODE] button to select video mode. JSTOON Nv-3186 Digital Night Vision Goggles

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Video Mode

Focusing the image

On the left lens, marked “far” and “near”. If the observation distance is far, please rotate the lens to left. If the distance is near, rotate the lens to right. Users can repeatedly adjust the optimal focal length according to the actual observation distance.

When you track the target is blurry, it means that you need to adjust the objective focusing handwheel, and repeatedly debug until you get a clear image. JSTOON Nv-3186 Digital Night Vision Goggles

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Focusing the image

Digital zoom

In the photo/video mode, press and hold the & or e. button for 3 seconds to turn on the zoom, the maximum support 4x zoom.

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Digital zoom

Turn on IR

In photo/video mode, if you have to view the darkness environment, please short press IR UP button to activate the IR LEDs, the image will change to black and white. The IR LEDs  have seven levels, short press IR UP button to up the level, short press IR DOWN button to down the level. (If the battery voltage is not enough, the IR LEDs level will down automatically. IR level can up to 7 level when the battery power is full. If only left half power, the level just can up to 5. If only left 25% power, the level just can up to 3. If the battery power is lower than 25%, IR LEDs can not be activated. ) JSTOON Nv-3186 Digital Night Vision Goggles

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Turn on IR

Shoot

The lens is aimed at the target and observed through the screen. Press the [SHOT] button to start recording, and the recording duration will be displayed on the screen. During shooting, the video recording is automatically saved in the memory card. JSTOON Nv-3186 Digital Night Vision Goggles
Note: When the memory capacity is full, the machine will automatically stop recording.

Playback video/photo

Watching Recorded Videos and Photos In the photo mode, press the [MODE] button to select the Playback mode. In playback mode, press the up or down button to turn pages forward and backward, the playback order is the shooting order. JSTOON Nv-3186 Digital Night Vision Goggles

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Playback video

Delete Items

Delete Stored Videos and Photos In playback mode, press the [MENU] button to enter the “delete” option, select the delete option, and then select the content to be deleted.

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Delete Items

Lock/unlock items

If you are worried about the photo or video being deleted by mistake, please use the lock function. In the return visit mode, select the photo/video to be locked, press [MODE] button to pop up the following menu, and then select the item you want to lock, when the item is locked on the left A key icon will appear, unlock as above. JSTOON Nv-3186 Digital Night Vision Goggles

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Lock Unlock items

Change video/photo resolution

In the photo/video mode, press [MENU] to enter the menu, and then select the item you want to change, photo options:[1 M 1280X960] [VGA 640X480];video options:[960P 1280X960] [640P 640X480),After completing the change, the corresponding icon will be displayed in the shooting program. JSTOON Nv-3186 Digital Night Vision Goggles

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Change Video

Change Night vision sensitivity

In the photo/video mode, press [MENU) to enter the menu, Use the 61. or e. button to select up and down, and then select the item you want to change, options: Low/Middle/ High.

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Change Night Vision

Change power frequency

In the photo/video mode, press [MENU] to enter the menu, Use the  or El button to select up and down, and then select the item you want to change,options:50Hz/60Hz

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Change power frequency

Automatic shutdown time

To save battery usage, you can set the device’s automatic shutdown time, ln the photo/video mode, press [MENU] to enter the menu, Use the  or El button to select up and down, and then select the item you want to change, options: 3min /5min /10min /OFF. JSTOON Nv-3186 Digital Night Vision Goggles

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Automatic shutdown time

Change Date/Time

In the photo/video mode, press [MENU) to enter the menu, Use the  or El button to adjust the value, use [MODE] bottom to select the item to be adjusted. You can also change how the time is displayed. JSTOON Nv-3186 Digital Night Vision Goggles

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Change Date & Time

Close time and date display

If you don’t want the time displayed in the video/photo, you can tum off the time display, ln the photo/video mode, press [MENU) to enter the menu, Use the  or El button to select up and down, and then select the item you want to change. options: off/ date/ date & time. JSTOON Nv-3186 Digital Night Vision Goggles

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Close time and date display

Change the menu language

In the photo/video mode, press [MENU] to enter the menu, Use the ll or a button to select up and down, and then select the item you want to change,
Options:[English1[Simplified Chinese/ [Traditional Chinese] ,[French1[Dutch]/[Spanish10talian1[Portuguese1[German] ,[R ussian1[Japanese1[Korean].

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Change the menu language

Format memory card

If you want to clear the data on the memory card, you can solve it by formatting, ln the photo/video mode, press [MENU] to enter the menu, Use the or a button to select up and down, Press the shot button to confirm.
NOTE: All data will be lost after formatting, please pay attention to backup! JSTOON Nv-3186 Digital Night Vision Goggles

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Format Memory Card

Reset device

Restoring factory settings will delete all previous user settings, ln the photo/video mode, press [MENU] to enter the menu, Use the ll or a button to select up and down, Press the shot button to confirm. JSTOON Nv-3186 Digital Night Vision Goggles

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Reset device

Install a tripod

This product can be Installed on a tripod, first install 1/4 “Screw Quick Release Plate to the bottom of the product, Then lock the product to the tripod. JSTOON Nv-3186 Digital Night Vision Goggles

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Install a tripod

Connecting to the PC through USB cable

  1. Turn on the night vision. Connect it to a computer through the supplied USB cable.
  2. When connecting to the computer, it will appears “MSDC” on the screen.
  3. Open [My Computer] or [Windows Explorer]. A “Removable Disk” appears in the drive list. Double-click.

Precautions

  1. Alkaline batteries need to be installed before use, preferably a brand new alkaline battery. If the battery power is low, it may not be able to turn on.
  2. Need to install memory card in advance to take pictures and record videos.
  3. Do not throw it Into water for soaking, it will damage the device.
  4. Because the observation distance is far, the sound cannot be transmitted.

Read More User Manuals

How far is night vision observation distance?

The observation distance varies according to the size of the target.

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - How far is night vision observation distance

Only Powered by 6 x 1.SV AA batteries

JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Only powered JSTOON Nv-3186 Digital Night Vision Goggles User Guide - Only powered

Leave a comment

Your email address will not be published.