Uni-T A10T A12T Temperature Humidity Meter User Manual

Uni-T A10T A12T Temperature Humidity Meter User Manual

I. Product functions and specifications

1.Basic functions

Indoor temperature/ humidity testing
Outdoor temperature testing (only A12T)
Records MAX/MIN value of temperature and humidity function
Clock function: conversion for 12/24 hour format
Alarm clock function: alarm lime up to 60 seconds

2. Technical specifications

(1). Technical parameters

Uni-T A10T A12T Temperature Humidity Meter User Manual - Technical Parameters

(2). Comfort level symbol

No display: temperature <20°C or temperature > 26°(,
humidity 50 – 70% RH;
Comfort: temperature 20 – 26°(, humidity 50 – 70% RH;
Wet: at any temperature, humidity > 70% RH;
Dry: at any temperature, humidity <50% RH

(3). Other specifications

Battery: 1 .5V (AAA)
Storage temperature: -20 – 60°C
Storage humidity: 20 – 80%RH

II. Product description

1. Structure description

Uni-T A10T A12T Temperature Humidity Meter User Manual - Structure description

2. Display description

Uni-T A10T A12T Temperature Humidity Meter User Manual - Display description Uni-T A10T A12T Temperature Humidity Meter User Manual - Display description Uni-T A10T A12T Temperature Humidity Meter User Manual - Display description

Ill. Operating instructions

  1. Battery installation instructions
    According to the direction on the back cover, to open the battery compartment door, remove the battery separator, and then close the battery compartment door and the product can be used.
  2. Instructions for keys
    MODE key:
    When not in setup mode, short press to switch between the clock display and alarm clock display;
    • In clock display: Long press to set up the clock Minute-> Hour and confirm;
    • In alarm clock display: Long press to set up the alarm clock Minute-> Hour and confirm;
    MAX/MIN key:
    Short press to switch between MAX, MIN, and Real lime measured value of temperature and humidity. When displaying the MAX/MIN value, long press MAX/MIN key for 2 seconds to clear the previous memory and restart recording of MAX/MIN value.
    ♦ Key:
    In setup mode: To adjust the settings of the object (short press for slow adjustment; long press for fast adjustment)
    When not in setup mode:
    • In clock mode: short press for conversion of 12/24 hour format
    • In alarm clock mode: short press to tum ON /OFF alarm clock function
  3. Operating instructions
    A. Clock mode
    “:” symbol between Hour and Minute will flash every 1 second. If the alarm dock function is enabled, a bell symbol will appear. Short press Mode key to switch to alarm clock mode. Long press Mode key to set clock _Minute that can be adjusted by pressing ♦ key.
    Press Mode key again to set clock _Hour that can be adjusted by pressing *key.
    Press Mode key again to confirm the setup information, then press *key to switch 12/24 hour format

B. Alarm clock mode
“:” symbol between Hour and Minute appears, but does not flash.
If the alarm clock function is enabled, a bell symbol will appear and flash every 1 second.
Short press Mode key to switch to clock mode.
Long press Mode key to set alarm clock_ Minute that can be adjusted by pressing * key.
Press Mode key again to set alarm clock _Hour that can be adjusted by pressing ♦ key.
Press Mode key again to confirm the setup information, then press ♦ key to turn ON/OFF the alarm clock function.

IV. Notes

  1. When initially using or replacing the battery, the clock will reset.
    Please put the battery back to the designated recycle site if the battery runs out.

Uni-T Logo

No6, Gong Ye Bei 1st Road,
Songshan Lake National High-Tech Industrial
Development Zone, Dongguan City,
Guangdong Province, China
Tel: (86-769) 8572 3888
http://www.uni-trend.com

Download PDF

Uni-T A10T A12T Temperature Humidity Meter User Manual PDF Download

Leave a comment

Your email address will not be published. Required fields are marked *