Honeywell T6 Pro Installation User Manual
UWP Mounting System installation
Position the UWP on the wall. Level and mark hole positions
Click Here Optional Decorative Cover Plate installation
Use the Optional Cover Plate when you need to cover paint gap from the old thermostat
Click Here Setting Slider Tabs
Use built-in jumper (R Slider Tab) to differentiate between one or two transformer systems
Click Here Mounting thermostat
Push excess wire back into the wall opening
Click Here Installer setup – using the thermostat
After the thermostat has powered up, touch START SETUP on the thermostat. You’ll be asked if you want to perform setup via app
Click Here Installer setup – using the Honeywell Home app
Download the Honeywell Home app from App Store or Google Play
Click Here Enter Contractor Mode
To enter Contractor Mode, press and hold the Honeywell Home logo for 5 seconds
Click Here Installer setup – advanced menu
To access the advanced menu, press and hold the Menu button for 5 seconds
Click Here Performing a system test
You can test the system setup in ADVANCED MENU under SYSTEM TEST option
Click Here