Wuhan Linptech K9C-W3 Self-Powered
Wireless Switch User Manual

Wuhan Linptech K9C-W3 Self-Powered Wireless Switch User Manual

Product Description

K9C series self-powered wireless switch

Wuhan Linptech K9C-W3 Self-Powered Wireless Switch User Manual - Product Description

K9Cseries self-powered wireless switch is a wireless signal transmitter without wiring and battery. It can be used in conjunction with the corresponding receiver/wall switch/gateway to perform lighting control, linkage and other functions. Please refer to the receiver/wall switch/ gateway ma nu al for the usage and pairing operation details. Wuhan Linptech

K9C series self-powered wireless switches use innovative self-powered tech no logy to collect the instantaneous energy of the switch and use it to send wireless sign a ls.

Therefore, a battery is not required, which avoids the trouble of changing a battery and protects the environment. Wuhan Linptech

Installation Instructions

Wuhan Linptech K9C-W3 Self-Powered Wireless Switch User Manual - Installation Instructions

Technical Info

Wuhan Linptech K9C-W3 Self-Powered Wireless Switch User Manual - Technical Info

Environmental protection
The device and its accessories (if included) should not be disposed of with household garbage. Disposal of the device and its accessories is subject to local regulations. Support proper collection and recycling. Wuhan Linptech

Disposal and recycling information

Wuhan Linptech K9C-W3 Self-Powered Wireless Switch User Manual - Disposal iconThis symbol (with or without a solid bar) on the device, and/or the packaging, indicates that the device and its electrical accessories (for example, a cable) should not be disposed of as household garbage. These items should not be disposed of as unsorted municipal waste and should be taken to a certified collection point for recycling or proper disposal. For more detailed information about device, contact your local city office, household waste disposal service, or retail store. Disposal of the device is subject to WEEE Directive Recast (Directive 2012/19/EU).The purpose of separating WEEE from other waste is to minimize the potential environmental impacts and human health risk of any hazardous substances that may be present.

Reduction of hazardous substances
This device is compliant with the REACH Regulation [Regulation (EC) No 1907 /2006] and Ro HS Directive Recast (Directive 2011/65/EU).

EU regulatory conformance statement Hereby, Wuhan Lintec Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of2014/53/EU.
The following marking is included in the product: Wuhan Linptech

Wuhan Linptech K9C-W3 Self-Powered Wireless Switch User Manual - CE icon

This device may be operated in all member states of the EU. Observe national and local regulations where the device is used. This device may be restricted for use, depending on the local network.

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Wuhan Linptech
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits a re designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Wuhan Linptech
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications cued void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).

Warranty Card

Dear valued customer:
Thank you for selecting the K9C self-powered wireless switch. In order to improve our service, please fill in the warranty card information carefully.

Warranty Card
Name ___________________
Add ____________________
Tel ____________________
Product type _________________
Fault reason _________________
Date of purchase ________________

  1. The warranty is valid for 12 months from the date of purchase.
  2. If you need to make a claim under warranty, please provide proof of purchase along with the warranty-card.
  3. If the fault is due to misuse, or incorrect installation, the warranty will be invalidated. Wuhan Linptech

Download PDF

Wuhan Linptech K9C-W3 Self-Powered
Wireless Switch User Manual PDF Download

Leave a comment

Your email address will not be published.