HOLLYLAND MARS 400S PRO User Manual

HOLLYLAND MARS 400S PRO User Manual

FOREWORD

Thank you for purchasing Hollyland Mars 400S PRO Wireless HD Video Transmission system. Please kindly read this manual carefully before using it. Hope you have a pleasant experience.

KEY FEATURES

• 400ft Transmission Range between TX and RX(LOS)
• 300ft Transmission Range between TX and APP(LOS)
• Integrated Cold Shoe for Quick Installation
• Lowest Transmission Latency 08s
• SDI Input & HDMI Input at TX
• SDI Output & HDMI Output at RX
• Supports DC Power Supply, USB Type-C Power Supply and Battery Power Supply
• 1 Transmitter Supports 2 Receivers(1 Transmitter Supports 1 Receiver and 2 APPs Monitoring, or 1 Transmitter Supports up to 4 APPs Monitoring Without Receiver)
• Supports Smart Channel Selection
• Supports APP Firmware Upgrade
• Direct Data Stream from RX for Live Streaming

PACKING LIST

1 TX WITH 1 RX PACKING

①Transmitter  x1
② Receiver  x1
③ Antenna x5
④ DC Adapter x1
⑤ User Guide  x1

SINGLE RECEIVER PACKING

① Receiver  x1
② Antenna  x3
③ DC Adapter x1
④ User Guide x1

TYPICAL SETUP

1 TX-1 RX SETUP 

1 TX-2 RX SETUP

PRODUCT INTERFACES

A TRANSMITTER

① Antenna Interface
② Fan Air Outlet
③ SDI Input
④ OLED Display Screen
⑤ UP
⑥ OK
⑦ DOWN
⑧ Cold Shoe
⑨ USB Type-C Interface
⑩ Power Switch
⑪ HDMI Input
⑫ DC Input

B RECEIVER

① Antenna Interface
② Fan Air Outlet
③ SDI Output
④ OLED Display Screen
⑤ UP
⑥ OK
⑦ DOWN
⑧ Cold Shoe
⑨ USB Type-C Interface
⑩ Power Switch
⑪ HDMI Output
⑫ DC Input

INSTALLATION

1. Install the antennas as demonstrated.
2. Secure the cold shoe with 1/4 screw hole at the bottom of the transmitter and mount it to the camera.
3. Connect the HDMI input or SDI input of the transmitter with camera’s by HDMI or SDI cable.
4. Connect to a power supply(compatible with NP-970 battery or the same series of the batteries).
5. Turn on the devices.

OLED DISPLAY

A TRANSMITTER

① Device Number
② WIFI Signal Strength
③ Scene Mode
④ USB Flash Detection Indicator
⑤ Device ID
⑥ Channel Display
⑦ Video Format
⑧ Fan Status
⑨ Battery Voltage Display

B RECEIVER

① Device Number
② WIFI Signal Strength
③ Scene Mode
④ USB Flash Detection Indicator
⑤ Device ID
⑥ Chanel Display
⑦ Video Format
⑧ Fan Status
⑨ Battery Voltage Display

 CAUTION

１.This device supports several power methods, and the device will be charged by the method which has a higher voltage.

* The picture on the left shows the symbol of Type-C power supply, the picture on the right shows the symbol of DC power supply.

QUICK GUIDE

 ENTER MENU

Long press the “OK” button for 3 seconds to enter the root menu interface. Click “UP” and “DOWN” button to switch menu options, click “OK” to confirm.

 CHANNEL CHANGE

Press the button “ UP/DOWN” on the transmitter or the receiver to change the current channel. Press “OK” to confirm the channel number, then the channel of the receiver and the transmitter will be synchronously and automatically changed.

PULL STREAM FROM RECEIVER

1. Confirm there is video format display on both transmitter and Use the Type- C to Lan Connector to connect the laptop and RX.
2. Go to the network settings on the laptop and set it to DHCP
3. Go to your live stream software, such as VLC Player, OBS Studio, Vmix, , and open the network video source via the RTSP URL: rtsp://192.168.218.25:5554.

 APP DOWNLOAD AND CONNECTION

1. “HollyView” APP Download

2. Connecting Method:

Enter the WiFi connection interface of mobile phone and find out the WiFi named as “HLD + DEVICE ID”, and input the WiFi password to connect (Factory Defult Password is: 12345678). After successful connection, you can have the APP monitoring.

PRODUCT PARAMETERS

FAE

If encounter any problems in using the product or need any help, please follow these ways to get more technical support:

Facebook
Instagram
YouTube
[email protected]
Website

SHENZHEN HOLLYLAND TECHNOLOGY CO,. LTD
8F, 5D Building, Skyworth Innovation Valley, Tangtou, Shiyan, Baoan District Shenzhen, China.

Download Manual PDF

HOLLYLAND MARS 400S PRO User Manual PDF Download