JBL TUNE 225TWS User Manual

JBL TUNE 225TWS User Manual

WHAT’S IN THE BOX

JBL TUNE 225TWS User Manual - What's in the box

HOW TO WEAR

JBL TUNE 225TWS User Manual - HOW TO WEAR

First time use

JBL TUNE 225TWS User Manual - First time use

Power on & Connect

JBL TUNE 225TWS User Manual - power on & Connect

Pairing

JBL TUNE 225TWS User Manual - Pairing

Power Off

JBL TUNE 225TWS User Manual - power off

Manual Controls

JBL TUNE 225TWS User Manual - Manual Controls

BUTTON COMMAND

JBL TUNE 225TWS User Manual - BUTTON COMMAND

JBL TUNE 225TWS Charging

JBL TUNE 225TWS User Manual - Charging

Led Behaviors

JBL TUNE 225TWS User Manual - LED behaviors

TECH SPEC

Driver Size: 12 mm Dynamic driver
Frequency Response: 20 Hz – 20 kHz
Sensitivity: 105 dB SPL
Maximum SPL: 98 dB SPL
Microphone sensitivity: -30 dBV@1 kHz/Pa
Impedance: 32 ohm
Bluetooth transmitted power: <12 dBm
Bluetooth transmitted modulation: GFSK/ π/4DQPSK/ 8DPSK
Bluetooth frequency: 2.402 GHz – 2.48 GHz
Bluetooth profile version: A2DP 1.3, AVRCP 1.5, HFP 1.7
Bluetooth version: 5.0
Headset battery type: Lithium-ion battery (22 mAh / 3.85 V )
Charging case battery type: Lithium-ion battery (410 mAh / 3.85 V )
Power supply: 5 V 1.0 A
Charging time: <2 hrs from empty
Music playtime with BT on: up to 5 hrs
Total music playtime with charging case: up to 25 hrs
Weight: 57 g

JBL TUNE 225TWS User Manual - Warning or Caution icon

TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS. JBL TUNE 225TWS

IC RF Exposure Information and Statement
The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (6132A-TUNE225TWS) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.049 W / kg.The device was tested for typical bodily operations where the product was kept 5 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user›s head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided. JBL TUNE 225TWS

Head operation
The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user›s ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.
IC: 6132A-TUNE225TWS

JBL TUNE 225TWS User Manual - Anatel logo

JBL TUNE 225TWS User Manual - Bluetooth logo

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

NOTE : The maximum operating temperature of the product is 45 ° C

JBL TUNE 225TWS User Manual - CE icon

Download PDF

JBL TUNE 225TWS User Manual PDF Download

Leave a comment

Your email address will not be published. Required fields are marked *