JULA 009533 Cordless grass trimmer 18 V 2 Ah 23 cm User Manual

JULA 009533 Cordless grass trimmer
18 V 2 Ah 23 cm User Manual

SAFETY INSTRUCTIONS

GENERAL SAFETY INSTRUCTIONS

•  Read all the instructions and safety instructions carefully before use. Failure to follow all the instructions and safety instructions can result in the risk of electric shock, fire and/or serious personal injury.
• The term “power tool” in all the warnings below refers to mains-powered (corded) or battery-powered (cordless) power tools.
•  Read these instructions carefully. Familiarize yourself with the controls on the product and how to use them.
•  Never allow children, or anyone who is unfamiliar with the product and these instructions, to use it. There may be local regulations for the minimum age of persons allowed to use the product.
•  Do not use the product when other persons, especially children, or pets, are in the vicinity.
•  The user is responsible for any accidents or risks to other persons or property.
• Keep children under supervision to make sure they do not play with the product.

WORK AREA

•  Keep the work area clean and well lit. Dark and cluttered work areas increase the risk of accidents and injuries.
•  Do not use power tools in explosive environments, such as in the vicinity of flammable liquids, gas or dust. Power tools produce sparks that can ignite dust and fumes.
•  Keep children and onlookers at a safe distance when using power tools. You can easily lose control of the product if you are distracted.

ELECTRICAL SAFETY

•  Avoid body contact with earthed surfaces such as pipes, radiators, cookers and refrigerators. There is an increased risk of electric shock if your body is earthed.
•  Do not expose power tools to rain or moisture. There is a greater risk of electric shock if water gets into a power tool.

PERSONAL SAFETY

•  Stay alert. Pay attention to what you are doing, and use your common sense when working with power tools. Never use power tools if you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when using a power tool can result in serious personal injury.
•  Use personal safety equipment. Wear safety glasses. Depending on the type of tool and how it is used, safety equipment such as dust masks, non-slip safety shoes, safety helmets and ear protection reduce the risk of personal injury.
•  Avoid accidental starting. Check that the power switch is in the OFF position before plugging in the power cord and/or the battery, or lifting/carrying the tool. Carrying a power tool with your finger on the switch, or connecting a tool to the mains supply when the switch is in the ON
  position, increases the risk of accidents and injuries.
•  Remove adjuster keys/spanners before starting the power tool. Spanners or the like that are left in a rotating part of the tool can cause personal injury.
• Do not overreach. Always maintain a firm footing and good balance. This will ensure
  you have better control over the tool in unexpected situations.
•  Wear suitable clothing. Do not wear loose-fitting clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose-fitting clothing, jewellery and long hair can get caught in moving parts.
•  Wear ear protection.

USING AND LOOKING AFTER POWER TOOLS

•  Do not force the power tool. Use the correct power tool for the planned work. The tool does the job better and safer when used at the rate for which it was designed.
•  Do not use the tool if it cannot be switched on and off with the power switch. Power tools that cannot be controlled with the power switch are dangerous and must be repaired.
•  Unplug the power cord and/or remove the battery before making any adjustments, changing accessories or putting the power tool away. These safety precautions reduce the risk of accidently starting the tool.
• Store power tools out of the reach of children when not in use. Never allow children, or anyone who is unfamiliar with the power tool and these instructions, to use the tool. Power tools are dangerous if used by inexperienced persons.
•  Keep power tools properly maintained. Check that moving parts are properly adjusted and do not jam, and that no parts are incorrectly fitted or damaged. Check for other factors that could affect functionality. If the power tool is damaged, it must be repaired before being used again. Many accidents are caused by poorly maintained power tools.
•  Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control.
•  Use the power tool, accessories etc., in accordance with these instructions, taking into account the actual working conditions and the work that is to be done. It can be dangerous to use power
  tools for purposes other than those for which they are intended to be used.

USING AND MAINTAINING BATTERY-POWERED TOOLS

•  The battery must only be charged with the charger recommended by the manufacturer. A charger intended for one type of battery can result in a fire risk if used with another type of battery.
•  Only use power tools with the specified batteries. The use of other batteries can result in a risk of personal injury and/or fire.
•  When the battery is not in use keep it away from paperclips, coins, keys, nails, screws and other metal objects that can short circuit the terminals. Short circuiting the battery terminals can cause burns or a fire.
•  Failure to handle the battery carefully can cause fluid to leak from the battery. Avoid contact with battery fluid. Rinse well with plenty of water if you come into contact with battery fluid. Seek medical attention if you get battery fluid in your eyes. Fluid leaking from the battery can cause irritation or burns.

SERVICE

The power tool must only be serviced by qualified personnel using identical spare parts. This will ensure that the power tool remains safe to use.

ADDITIONAL SPECIAL SAFETY INSTRUCTIONS

• Wear safety glasses.
•  Wear safety gloves.
•  Do not expose the product to rain or moisture.
•  Familiarize yourself with the controls on the product and how to use them.
•  Never allow children, or anyone who is unfamiliar with the product and these instructions, to use it.
• Do not use the product when other persons, especially children, or pets, are in the vicinity.
• The recommended safe distance is 4.5 meters.
•  Only use the product in daylight, or in good artificial lighting.
•  Always check the product for wear and damage before using it, and if the trimmer head has knocked into a foreign object. Do not use the product if the trimmer head is damaged or incorrectly fitted.
•  Always check before use that all the parts are undamaged and working properly.
•  Do not use the product unless all the guards and other safety devices are in place, are working correctly and are in good condition.
•  Carefully inspect the area where the product is to be used and remove any stones, wires, bones or other foreign objects.
•  Before starting the product, check that the trimmer line is not in contact with any
  stones or other objects that can be thrown up.
•  Keep your hands and feet away from moving parts, especially when starting the motor.
•  Be careful not to injure yourself on the line cutter when adjusting the length of the trimmer line. After pulling out new trimmer line, always return the lawn trimmer to normal working position
  before starting it.
•  Do not use trimmer units made of metal.
•  Only use parts and accessories recommended by the manufacturer.
•  Remove the battery before maintenance, inspection and/or cleaning, and when the
  product is not in use.
•  Always keep the ventilation openings clean.
•  Do not carry the product with your finger on the power switch.
• Always maintain a firm footing and good balance.
• Keep the work area free from wires, stones and other similar objects.
• Do not allow the trimmer line to knock against hard objects – risk of personal injury and/or material damage.
• Never attempt to stop the trimmer head with your hands. Wait until the trimmer head stops by itself.
• Never attempt to trim grass that does not grow on the ground, such as grass growing on walls, or stones etc.
• Do not move the product over gravel when the motor is running.

WARNING

The trimmer head continues to rotate for a short while after the trimmer has been switched off.

SAFETY INSTRUCTIONS FOR BATTERY

• Never attempt to open batteries in any circumstances.
•  Do not expose batteries to rain or moisture.
•  Never burn the battery, not even if it is damaged and can no longer be charged. The battery can explode if it is burned.
•  Do not store the where the temperature can exceed 40°C.
•  Do not leave the battery in the charger once charging is complete – risk of battery
  leakage.
•  Only charge at room temperature.
• Only charge with the supplied charger.
• Check that the battery is dry and clean before charging.
• Only use the type of battery supplied with the tool.
• Recycle used batteries in accordance with local regulations.
• A small amount of fluid can leak from the battery during extreme use, or in extreme temperatures. Follow the instructions below if you discover fluid on the battery.
• Carefully wipe away the fluid with a cloth. Avoid contact with battery fluid.
• The battery fluid consists of a solution containing 25–30% of sodium hydroxide. Follow the instructions below if battery fluid comes into contact with your skin or eyes. On skin contact: rinse immediately with plenty of fresh water. Neutralist with a mild acid, such as lemon juice or vinegar. On eye contact: rinse immediately with plenty of fresh water for at least 10 minutes. Seek medical attention.
• The battery cells are of the lithium-ion type. Do not discard batteries with household waste, in a fire or in water. Recycle used batteries in accordance with local regulations.

SAFETY INSTRUCTIONS FOR CHARGER

•  The plug on the charger must match the power point. Never modify the plug in any way. Unmodified plugs and matching outlets reduce the risk of electric shock.
• The charger must only be used with the type of battery recommended by the manufacturer. Charging other batteries can result in an explosion, personal injury or material damage.
•  Do not charge more than two consecutive batteries without allowing the charger to cool.
• After charging, unplug the power cord to the charger and remove the battery from the charger. Do not leave batteries in the charger.
•  Never carry the product by the power cord. Do not pull the power cord to pull out the plug. Keep the power cord away from heat, oil and sharp edges.
• Do not attempt to charge non rechargeable batteries.
• The power cord for the charger cannot be replaced. Do not use the charger if the power cord or plug are damaged.
• Do not expose the charger to rain or moisture.
• Do not open the charger.
• Do not insert objects into the ventilation openings on the charger.
• The charger is only intended for indoor use.
• The battery will get hot during long periods of use. Allow it to cool for at least 30 minutes before charging.
• The charger and battery can get hot during the charging. This is quite normal.
• The charger should preferably be used at room temperature. Do not cover the battery charger. Do not charge the battery in direct sunlight or near sources of heat.
• The battery should be charged when it no longer supplies the tool with enough power. Do not continue to use the tool when the battery no longer supplies the tool with enough power. Charge the battery according to the instructions. The battery can be recharged at any time,even if it is not fully discharged.
• Make sure that the charger terminals are not short circuited by any metal objects when the power cord on the charger is plugged in. Unplug the power cord when the charger is not in use. Unplug the power cord before cleaning.
• Never immerse the charger in water or any other liquid.
• Never allow water to get into the charger – risk of electric shock. Do not charge batteries in hot areas.

IMPORTANT:

• To ensure maximum battery life it should always be charged at a temperature of 18-24°C. Do not charge the battery at temperatures less than 4°C or higher than 40°C, this can damage the battery.
• Never attempt to open the battery in any circumstances.
•  Do not use the battery if the casing is damaged, hand it in to be recycled in accordance with local regulations.

REMAINING RISKS

•  Even if the product is used in accordance with the instructions it is impossible to rule out all risk factors. The following are potential risks associated with the type and design of the product:
  – Damage to lungs (if an effective face mask is not worn).
  – Damage to ears (if effective ear protection is not worn).
  – Vibration injuries (if the product is used for long periods, or is not handled and maintained correctly).

WARNING

The product produces an electromagnetic field when in use. This field can in some circumstances affect active or passive medical implants. If you have a medical implant you should consult your doctor and/or the manufacturer of the medical implant before using the product to reduce the risk of serious or fatal personal injury.

IMPORTANT INFORMATION ON BATTERY

• Do not dismantle the battery or attempt to replace the battery cells.
• Short circuiting the battery terminals on this battery by jewelry or tools can result in serious burn injuries.
• Store the battery in a dry place at no more than 27°C.
• Store the battery with a 30% – 50% charge.
•  Charge the battery every seven months during long-term storage.

SYMBOLS

	WARNING
	Read the instructions before use.
	Wear safety glasses.
	Do not be exposed to moisture.
	Warning for ejected objects.
	Keep at a safe distance.
	Approved as per applicable directives.
	Recycle discarded product as electrical waste.
	Recycle discarded product as electrical waste.

TECHNICAL DATA

Always wear ear protection!

The declared vibration value, which has been measured by a standardized test method, can be used to compare different tools with each other and for a preliminary assessment of exposure.

WARNING

The actual vibration level when using power tools may differ from the specified maximum value, depending on how the tool is used. It is therefore necessary to determine which safety precautions are required to protect the user, based on an estimate of exposure in actual operating conditions (taking into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in addition to the start-up time).

DESCRIPTION

1. Main handle
2. Battery
3. Power switch
4. Telescopic lock
5. Trimmer guard
6. Trimmer head
7. Wheel
8. Control to adjust trimming angle

9. Knob to adjust support handle
10. Support handle
11. Start inhibitor

USE

INTENDED USE

• The product is intended for trimming grass. Never use the product for anything other than the purpose it was designed for. The product is only intended for household use.
• The charger must only be used with the type of battery recommended by the manufacturer.
• The product must only be used as it is intended to be used. All other use is considered to be unsuitable.

BATTERY CHARGING

NOTE:

•  Charge the battery before using it for the first time.
•  The battery gets warm during the charging. This is quite normal.

1.  Connect the charger to a power point. Only charge at an ambient temperature of 4 – 40°C. The recommended optimum charging temperature is 24°C.
2.  Plug the charger into a power point. The red status light goes on during charging.
3. The battery is fully charged in about 4 hours. The status light goes green when the battery is fully charged. The battery reaches full capacity only when it has been charged and discharged several times.
4. Test the power point with a lamp or other product.
5. Move the charger and battery to an area where the temperature is 18–24°C.
6. If you still have charging problems,hand in the product and charger to an authorised service centre.

INSERTING/REMOVING THE BATTERY

NOTE: 

Remove the battery before maintenance,  replacing accessories and/or cleaning.

1. Check that the power switch is in the OFF position.
2. Press the battery lock on the end of the battery and remove the battery from the product.
3.  Align the battery ridges to the slots in the casing, and press the battery in place. Press in the battery all the way until it clicks into place.
4. Never attempt to force the battery in place. If it is not easy to press it in place, it is not properly aligned.

STARTING/STOPPING 

1. Press the start lock and then press the power switch to start.
2. Release the power switch on the handle to stop.

ADJUSTING THE ANGLE OF THE TRIMMER HEAD

The angle of the trimmer head can be adjusted from 0° to 90°. The 90° angle is intended for edge trimming.

1.  To change the angle, first push up the
   control to adjust the trimming angle.
2.  Keep the control pressed in while
   turning the trimmer head.
3.  Release the control when the trimmer
   head is in the required position.
4.  Make sure the control goes back to the
   original position so that the trimmer
   head locks.

EDGE TRIMMING

1. Set the trimmer head to an angle of 90°.
2.  Make sure that both wheels (see arrows) rest on the ground during the work.

FIG. 3

REPLACING THE LINE SPOOL

1.  Press down the spool head, turn
   anticlockwise and remove the spool holder.
   FIG. 4
2.  Replace the line spool in the spool holder
   by putting the end of the line through the
   hole in the holder and putting the line
   spool in the holder.
   FIG. 5
3. Put in the spring and replace the spool
   holder with the line spool by pressing
   down the holder and turning it clockwise
   so that it locks into place.
4. Check that the trimmer line is fed forward
   correctly by pressing the feed button and
   pulling the trimmer line. The trimmer line
   should come out smoothly

NOTE:

Be careful not to lose the small spring in the spool head.

Rewinding the line spool

1.  Put about 3 mm of trimmer line through the hole in the spool.
2. Wind the trimmer line tightly and evenly in the direction of the arrow.

NOTE:

• Only use trimmer line with a diameter of 1.2 mm.
  
• The line spool holds about 6.5 m of trimmer line.

Feeding the line

Tap the feed button on the ground while the trimmer is running to feed forward the trimmer
line.

MAINTENANCE

NOTE:

Remove the battery before cleaning. 

•  Clean the product with a cloth moistened with a mild detergent.
•  Do not immerse the product in water or any other liquid, and do not splash with water or any other liquid.
• Make sure no liquid gets into the product.
• Do not use a high-pressure jet to clean the product.

STORAGE

• Remove the battery from the product after use.
• Store the product out of the reach of children when not in use.
• Only use parts and accessories recommended by the manufacturer.

Download Manual PDF

JULA 009533 Cordless grass trimmer
18 V 2 Ah 23 cm User Manual PDF Download