Ring video doorbell 2nd generation user manual
Read Full User Manual
Set up your Video Doorbell near your wifi router.
In the Ring app, select Set Up a Device.
When prompted, select Doorbells, and follow the in-app instructions.
Set your install height.
Install your Video Doorbell approximately four feet (1.20 meters) above the ground for optimal performance.
Remove your existing doorbell.
If replacing an existing doorbell, shut off power at the breaker. Then remove it from the wall and disconnect the wires.
Do you have an in-home chime?
The chime can ring when the button on your Video Doorbell is pressed. Just follow the in-app instructions during setup Ring video doorbell 2nd generation .
Don’t have an in-home chime?
If you see the “No In-Home Chime” button during setup, be sure to press it.
Insert the included mini-level.
This helps to ensure the camera is parallel to the ground when you install your Doorbell Ring video doorbell 2nd generation .
Mark the screw holes.
Use the bracket as a template to mark the four corner holes. The recommended install height is 4 feet above the ground Ring video doorbell 2nd generation .