ICQN IQ M7051N03N 1 60 Litre XXL Mini Oven User Manual
Dear Customer,
Thank you for relying on our products. We aim to allow you to optimally and efficiently use this environment-friendly product produced in our modern facilities under precise conditions with respect to sense of quality in total. We advise you to read these operating manual thoroughly before using the mini oven and keep it permanently so that the features of the mini oven you have purchased will stay the same as the first day for a long time and serve in an optimum efficient way.
This product has been produced in modern environment-friendly facilities without adversely affecting nature. “Complies with AEEE Regulation.”
WARNINGS
This appliance is manufactured in accordance with the safety regulations. Operation against the rules cause harm both to the person and the appliance. Do not put any flammable, ignitable materials or material that may melt or deform due to the heat inside the oven against possible risks even when your appliance is not operated. Appliance is not designed to be set from remote or to be remotely operated.
Door surface may reach high temperatures when the appliance is operated. Do not pour cold water to the tray or inside the oven while the surface of the appliance is still hot. Surface of the appliance may get damaged as a result of the sudden change in the temperature, and it may cause scaldings. Long term intense use of the appliance may require extra ventilation, for example, opening a window, or a better ventilation, such as increasing the mechanical ventilation level. Put curtains, tulles, paper or any flammable (ignitable) material away from the appliance before starting to use the appliance. Do not put ignitable or flammable materials on or in the appliance.
Keep an eye on the children in the vicinity of the appliance. This appliance is not intended to be used by people with physical, sensory and mental disabilities (including children) or those who have not adequate experience and knowledge regarding its use, unless they are under the supervision of a person responsible for the safety of the appliance. Appliance may be used by children above age of 8, persons with limited physical, perceptual or mental abilities or persons with a lack of experience and knowledge if they are supervised or given instructions on the operation of the appliance and any relevant risks they may be encountered. Children should not tamper with the appliance. Cleaning and user maintenance of the appliance shall not be performed by unattended children. Appliance shall be very hot while it is being operated or after a short while when it is operated; do not touch heater surfaces, and let children to touch these surfaces. Keep the appliance and cord away from children under 8. Children shall be supervised to ensure that they do not play with the appliance. This appliance is suitable for use at home and similar environments.
Do not apply pressure on the oven door with heavy objects when the door is open; do not lean, place heavy objects on the door or handle the appliance by holding its door.
Use your appliance for cooking and heating your meal only. Do not use your appliance for unintended purposes (heating the room, for commercial purposes etc.). Ensure that the appliance is unplugged before replacing the lamp of your appliance to prevent a risk of electric shock. The usage life of this product is 10 (ten) years.
ELECTRICAL CONNECTION AND SAFETY
Your appliance requires 16 Amps current. Your appliance is designed for a power supply of 220-240V, 50/60Hz If your mains supply specifications are different from the specified values, contact qualified persons. Electrical connection of your appliance shall only be performed with earthed outlets installed as per the regulations. Contact authorized service if an earthed outlet is not available where the appliance shall be placed. Manufacturer is not responsible for damages caused by unearthed outlets. If the mains cord (plugged cord) is damaged, this cord must be replaced by the importer or its service agent or an equally qualified personnel to prevent a hazardous situation. Power cord of your appliance shall not come into contact with the hot components of the appliance.
EXPLANATION OF THE OVEN AND THE CONTROL PANEL
TECHNICAL SPECIFICATIONS
USAGE OF THE OVEN
Insert the plug into a grounded socket. Set the timer to manual or automatic cooking. Adjust the thermostat to the appropriate temperature value according to the values in the cooking table. When the timer is set to the desired time, you will hear a warning sound at the end of cooking and cooking will end.
A slight smoke and odor may be emitted while the protective materials on the heating elements harden during the initial operation of your oven. This is a normal situation and not a manufacturing defect. Defrosting: Remove the material to be thawed from its container and place it on the grill. Insert the square tray so that the dissolved water flows down the grill. Thus, the products to be thawed will not be soaked in their own melting water. Do not use the melted water (for health reasons) and discard it. You can use the defrosting feature as indicated in the cooking chart,
It is recommended to use functions during thawing.
Since thawing times vary depending on the weight of the product, check the defrosting from time to time. It is recommended to preheat your oven for 8-10 minutes before starting the cooking process. This oven has been produced for cooking at home only. Please do not use for other purposes.
B. Timer
Allows you to set the cooking time. When the time you set expires, the timer will cut off the electricity of the heaters and cooking zone and give a warning with a ringing sound. To turn off your device, set the timer, program and thermostat button to ‘0’. It will run indefinitely once it is put into position. If it is desired to set the timer in less than 10 minutes, first of all, the timer button should be turned 90 minutes and then it should be brought to the desired time.
D. Temperature setting
It provides the temperature range in the oven. It is used with the oven programmer control button. When the temperature inside your oven reaches the value you set, the thermostat switches off and the thermostat light turns off. When the temperature drops below the set value, the thermostat is activated again.
E. Rotisserie function
Only the chicken rotisserie motor runs. It enables the chicken on the rotisserie to be cooked while rotating. It is used to brown the surface of the food using the grill heating element.
THE CHICKEN FLIP SKEWER, PRIMARILY BY INSERTING THE “B” TIP INTO THE MOTOR SLOT, SHOULD BE PUSHED FORWARD, AND THEN BE SEATED INTO THE “A” SLOT. AFTER THE MINI OVEN IS OPERATED; IN DETAIL C, WITH THE ROCKER SWITCH IS SET TO “ON”, THE CHICKEN FLIP MOTOR SHOULD BE OPERATED.
50 LT ROTISSERIE USAGE
THE CHICKEN FLIP SKEWER, PRIMARILY BY INSERTING THE “B” TIP INTO THE MOTOR SLOT, SHOULD BE PUSHED FORWARD, AND THEN BE SEATED INTO THE “A” SLOT. AFTER THE MINI OVEN IS OPERATED; IN DETAIL C, WITH THE ROCKER SWITCH IS SET TO “ON”, THE CHICKEN FLIP MOTOR SHOULD BE OPERATED.
60 LT ROTISSERIE USAGE
F. Digital Timer (Only for IQ M4552N02D 1**)
1. STANDBY MODE
When the device is first energized, the numbers “00” begin to flash on the screen. Flashing takes place once a second. The relay is not in transmission. Unless any button is touched, 00 numbers continue to flash. As time goes on, there is no increase in 00 numbers.
When the device is in standby mode, pressing only the minus or only the plus button does not perform any function.
(*): Only available on some models.
2. TIMER MODE
While the device is in manual mode, timer mode is activated by pressing the “Plus” button. Timer adjustment is made between 1 minute and 4 hours by using the plus and minus buttons in the timer mode. Increasing and decreasing operations can be provided by holding down the buttons. After installation, the timer value on the screen counts down until it reaches `00′.
The timer value set for 1 hour displayed on the screen as “1h” The timer value set for 2 hour displayed on the screen as “2h” The timer value set for 3 hour displayed on the screen as “3h” The timer value set for 4 hour displayed on the screen as “4h” As soon as the established value counts down and falls below 1 minute, the remaining seconds value appears on the screen as 59, 58, 57… seconds. When the timer expires and reaches 00, the alarm sound is activated, the relay stops transmission. The value 00 on the display also flashes in a coordinated manner with the alarm sound. Unless any button is touched, the alarm sounds for about 7 minutes. After 7 minutes, the alarm stops, but the numbers ’00’ continue to flash on the screen. When the plus and minus buttons are pressed at the same time, the flashing process stops and the relay turn on the transmission. If the plus and minus buttons are pressed together before the 7-minute period has expired, the alarm sound will be cut, `00′ numbers will be fixed on the screen, the relay will be transmitted. If only the minus or only the plus button is pressed while the alarm is active, the alarm sound is cut off, the flashing operation continues.
3.ADJUSTMENT OF BUZZER TONE
When the device is in manual mode and the numbers ’00’ appear on the screen, the buzzer tone setting is activated by holding down the minus button for about 2 seconds. When the buzzer tone setting is activated, the currently active buzzer tone appears with a beep (t1,t2 or t3). Then the buzzer tone changes (in order of t1, t2, t3, t1, t2…) in order to each minus button pressing. To activate the selected tone, while the name of the buzzer tone appears on the screen, it is waited for 3 seconds without pressing any button or the tone is activated by pressing the plus button.
NOTE: During the operation of the device, a beep sounds at every valid key press.
(*): Only available on some models.
Yoghurt Fermentation
Steam Cleaning
ACCESSORIES
COOKING CHART
Information regarding the types of food that we have tested in our laboratories and determined the cooking values thereof are presented in the following table. Cooking times may vary depending on the mains voltage, the quality of the material to be cooked, the quantity and the temperature. It is possible that the dishes you cook using these values may not suit to your taste. You can set different values to get different tastes and results suiting your taste by making trials.
Pre-heat your oven for 10 min. before cooking.
OVEN LAMP
Replacement of the Oven Lamp WARNING: To avoid electric shock, ensure that the device circuit is open before changing the lamp. (Open circuit means that the power is cut-off.) Cut off the power supply of your appliance first, and ensure that the it is cooled down. Remove the glass protector by rotating as shown in the figure. Using plastic gloves may help you if you have difficulty in rotating it. Then, remove the lamp by rotating it, and install the new lamp with the same specifications. Replace the glass protector, plug the appliance and complete the replacement procedure. You can now use your oven.
SUGGESTIONS FOR ENERGY SAVING
- a) While the food is cooking, the oven door should not be opened frequently.
- b) Always use the original accessories included in the manual for better results.
- c) While cooking your food, preheat the oven if the recipe or the table in the user manual says to preheat.
- d) Cook multiple dishes one after the other. The oven will not lose its heat. Turn off the oven a few minutes before the end of cooking. In this case, do not open the oven door.
TROUBLESHOOTING
If you determine an abnormal situation regarding your appliance, you can try troubleshooting based on the explanations in the table. If your appliance is not operating as intended, contact the Call Centre. You can find contact information from the web site.
| PROBLEM | CAUSE | SOLUTION |
| Appliance is not working. | The appliance may not be plugged to a grounded outlet. | Check whether the plug is inserted to the outlet. |
| Fuse may be faulty or blown. | Check the fuse in your fuse box. If a fuse is blown, re-commission. | |
| The mains voltage may have fluctuated. | Unplug and plug the appliance. | |
| Vapour is emanated as the appliance is working. | It is normal to see vapour during operation. | This is not a fault. |
| Metal sounds are heard when the appliance is heated. | Metal parts may expand and make sounds when heated. | This is not a sign of malfunction. |
| Oven is not heating | No electricity. | Ensure the mains is operational and check the fuses in the fuse box. If required, re-commission the fuses. |
| For models that feature a timer, the timer may not be set. | Adjust the timer or switch it to the hand icon. | |
| Function and/or temperature button may not be set. | Adjust the function and/or temperature button. | |
| Oven light is not on | No electricity. | Ensure the mains is operational and check the fuses in the fuse box. If required, re-commission the fuses. |
| Oven lamp may be faulty. | Replace the lamp. | |
| Function and/or temperature button may not be set. | Adjust the function and/or temperature button. |
MAINTENANCE AND CLEANING
- Unplug your device from the socket.
- Before cleaning your oven, make sure that all control buttons are turned off, that your device has cooled down and that the plug is unplugged.
- Do not use cleaning agents containing particles that may scratch the painted parts of the oven.
- Use cream or liquid cleansers that do not contain particles.
- As it may damage the surfaces; Do not use caustic creams, abrasive cleaning powders, coarse wire wool or hard tools. Clean up any spilled liquids immediately.
- You will get the best results if you clean the inside of the enamel oven while the oven is warm.
- Wipe the oven with a soft cloth dipped in soapy water after each use. Then wipe it once again with a wet cloth, then dry it.
- From time to time, it may be necessary to perform a complete cleaning using a liquid cleaning agent. Do not clean with dry and powder cleaners.
- Do not clean the inner parts of your oven, the door, the tray and other parts of the oven with tools such as hard brushes, cleaning wires or knives.
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT CONTROL REGULATION. COMPLIES WITH AEEE REGULATIONS
This product was manufactured from recyclable and reusable high quality parts and materials. Therefore, do not dispose of this product with other domestic wastes at the end of its life cycle. Take it to a collection point for electrical and electronic equipment. You can ask your local administration about these collection points. You can help protect the environment and natural resources by delivering the used products for recycling. Before disposing of the product, cut the power cord and render it non-functional for children’s safety.
PACKAGE INFORMATION The product’s packaging is made of recyclable materials, in accordance with the National Legislation. Do not dispose the packaging waste with the household waste or other wastes, dispose it to the packaging collection areas specified by local authorities.
