VIVO MOUNT-KB05E Series Clamp-on Keyboard
Tray User Manual

VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User ManualVIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual1

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.

VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual - qr code
https://vivo-us.com/products/mount-kb05a

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

 

VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual - measaging icon[email protected]

VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual - chat iconwww.vivo-us.com
Chat live with an agent!

VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual - call icon309-278-5303

 

⚠️WARNING! 

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.

⚠️WARNING: CHOKING HAZARD 

PACKAGE CONTENTS

VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual - PACKAGE CONTENTSNOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual - TOOLS NEEDED

ASSEMBLY STEPS

STEP 1

Assemble slider brackets (B) to the clamps (C) using M4x7 screws (D). Tighten with a Phillips screwdriver.

NOTE: Clamp can be offset using the extra holes in slider brackets (B) to allow the tray to be pulled out an extra 1.2” (30mm) when in use. If mounted this way the tray will sit further out from desk edge.VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual - STEP 1

STEP 2

Assemble slider brackets with clamps to the keyboard tray (A) using M5x12 screws (E), and tighten with a Phillips screwdriver. The clamps must be on the opposite end from the center cable guide.VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual - STEP 2

STEP 3

Place pads (F) on the underside of each clamp. Place assembled keyboard mount on edge of desk and tighten clamps. NOTE: To ensure keyboard tray is level, do not over-tighten clamps.

Slide keyboard tray forward/back to desired position.VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual - STEP 3

VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual - instragram iconLove your new VIVO setup and want to share? Tag us in your photo! @vivo_us

Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

AVG. RESOLUTION TIME (within office hrs): < 15 M

AVG. RESOLUTION TIME (within office hrs): 5M 4S

VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual - measaging icon[email protected] 

VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual - chat iconwww.vivo-us.com 
Chat live with an agent!

VIVO MOUNT-KB05E Series Clamp-on Keyboard Tray User Manual - call icon309-278-5303

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

Download Manual PDF

VIVO MOUNT-KB05E Series Clamp-on Keyboard
Tray User Manual PDF Download

Leave a comment

Your email address will not be published. Required fields are marked *