VIVO STAND-TV04M, STAND-TV04MW Black TV Cart for
13″ to 60″ Screens User Manual
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. Instruction Manual
https://vivo-us.com/products/stand-tv04m
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com
Chat live with an agent!
309-278-5303
⚠️WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
⚠️TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
⚠️WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
ASSEMBLY STEPS
STEP 1
Attach wheels (9) to the long and short square tubing (1,2) using the provided wrench (21).  |
STEP 2
Attach the square tubing (1,2) to the tube connector (3) using M6x60 Allen head bolt (10) and the M6 socket plate (11). |
STEP 3
Insert pole cover (8) into top of pole (6). Attach poles (5,6) using pole connector (7). Carefully thread the pole connector in perfectly straight to avoid cross-threading. If you feel resistance, back the connector out and restart. Once you are certain the connector is going in straight, use additional force to tighten.NOTE: The pole connector threads are very fine and could be sharp. It may be helpful to grip the pole connector with a cloth or towel to produce sufficient force in order to thread into the poles.” |
STEP 4
Slide tube connector cover (4) over bottom of pole assembly and attach pole to base using M6x10 allen head bolts (12). Slide cover down over base. |
STEP 5
Attach shelf support connecting plate (13) to pole (5) using M6x10 allen head bolts (12). |
STEP 6
Attach shelf supports (15) to shelf (14) using M6 nuts (16). |
STEP 7
Mount shelf (14) onto shelf support connecting plate (13) using M6x10 allen head bolts (12). |
STEP 8
Slide square plate connector and rubber pad (17) over top of pole (6) and tighten grub screw. |
STEP 9
Attach square plate (18) to square plate connector using M6x10 allen head bolts (12) and M6 washers (19). |
STEP 10
| 10-1: Secure the TV arm set (20) to back of television using bolts (22-24) and washers (25-27).  | 10-2: If necessary, use spacers (28,29).  |
STEP 11
Attach television to square plate as shown in diagram.  |
STEP 12
Tighten safety bolt using phillips head screwdriver. |
STEP 13
Adjust height and tilt angle for best viewing. Route cables as needed.  |
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
AVG. RESOLUTION TIME (within office hrs): 5M 4S
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
309-278-5303
www.vivo-us.com
Chat live with an agent!
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Download Manual PDF
VIVO STAND-TV04M, STAND-TV04MW Black TV Cart for
13″ to 60″ Screens User Manual PDF Download
