VIVO STAND-V001, STAND-V001W Single Monitor
Desk Mount User Manual
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. Instruction Manual
https://vivo-us.com/products/stand-v001
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com
Chat live with an agent!
309-278-5303
⚠️WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
⚠️TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
⚠️WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS 
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
ASSEMBLY STEPS
STEP 1
| OPTION A: Desk Clamp Install Install the Clamp (B) to the Pole (A) using M6x16 Screws (G) and tighten using 3mm Allen Wrench (M). Mount Clamp (B) to the desktop and tighten using the plastic knob.   |
| Option B: Grommet Install If desk does not have an existing grommet hole, drill a 3/8” (10mm) diameter hole at the desired position through the mounting surface. Disassemble Clamp (B) into individual parts. Remove Clamp Plate (B1) (You will not need this for Grommet installation) using Phillips screwdriver and remove Knob (B2).  Install Grommet Plate (H) to the Pole (A) using M6x16 Screws (G) and 3mm Allen Wrench (M). Attach Soft Pad (I) to the Grommet Plate (H). Position Pole (A) on the mounting surface and secure using the Support Plate (J) and Knob (B2). |
STEP 2
Slide Pole Cable Clip (L) and Swivel Arm (C) onto Pole (A). Tighten Swivel Arm (C) at desired height using 6mm Allen Wrench (O). Insert Pole Cap (E) into top of Pole (A). |
STEP 3
Attach Cable Clips (K) onto each segment of Swivel Arm (C). |
STEP 4
| OPTION A: Flat Back Monitor Attach the VESA plate (D) to the monitor with Thumbscrews (M-A). NOTE: Hand tighten screws to avoid over tightening.  |
| OPTION B: Curved Back Monitor Attach the VESA Plate (D) to the monitor with M4x30 Screws (M-B) and D6 Spacers (M-C). NOTE: Gently tighten using a screwdriver  |
STEP 5
Slide VESA Plate (D) with monitor onto the head of Swivel Arm (C). Install the M6Security Nut (F). Make sure the security nut is installed before you rotate the monitor.  |
STEP 6
Manage cables in Cable Clips (K) and Pole Cable Clip (L). |
STEP 7
Tighten the screw with the supplied 5mm Allen Wrench (N) to fix the tilt angle and to make any necessary adjustments. |
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESOLUTION TIME (within office hrs): 5M 4S
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
www.vivo-us.com
Chat live with an agent!
309-278-5303
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Download Manual PDF
VIVO STAND-V001, STAND-V001W Single Monitor
Desk Mount User Manual PDF Download
