WYZE WVOD1 Cam Outdoor Add-on Camera User Manual

WYZE WVOD1 Cam Outdoor Add-on Camera User Manual

 

 

 

Bay Area Compliance Labs Corp.

UL 62368-1, Second Edition, December 1, 2014
CAN/CSA-C22.2 No. 62368-1-14, Second Edition

AUDIO/VIDEO, INFORMATION AND
COMMUNICATION TECHNOLOGY EQUIPMENT
— Part 1: Safety requirements

TEST REPORT

For

TianJin HuaLai Technology Co.,Ltd.
No.10 JinPing Road, Ya An Street, Nankai District, Tianjin, China

 

Model: WVOD1

 

 

 

 

 

 

 

Report Type: Product Type:
Original Report WYZE CAM OUTDOOR
Prepared By Paul Chan Zk
Safety Engineer
fe
Report Number R2010162-62368

 

Report Date 2020-10-10

 

 

: Steven Gee \ /n
Reviewed By product Reviewer \o VW).
Bay Area Compliance Laboratories Corp. ~
1274 Anvilwood Ave

Sunnyvale, CA 94089, USA
Tel: (408) 732-9162, Fax: (408) 732 9164

 

 

 

Vip
NY,

Se

s

LL

 

or =n fe
<> (ACCREDITED)

“hao ‘CERTIFICATE #3297.02
Note: This test report was prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written
consent from Bay Area Compliance Laboratories Corp.This test report shall not be used by the customer to claim product certification, approval, or
endorsement by A2LA or any agency of the United States Government or any foreign government.
This test report may contain data and test methods that are not covered by BACL’s scope of accreditation as of the test report date shown above. These items
are marked within the test report text with an asterisk “*”

x”\

SN

~

)) (
Ay] Sis

aS
7,

 

Ed

 

 

TianJin HuaLai Technology Co.,Ltd.

Model: WVOD1

 

DOCUMENT REVISION HISTORY

 

 

 

 

Revision . ae . .:
Number Report Number Description of Revision Date of Revision
0 R2010162-62368 — ae

 

 

 

 

 

Report Number: R2010162-62368 Page 2 of 69 UL-CSA-62368 Second Edition Report

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

 

 

 

 

 

 

 

Test Item description 200.0… eceeesceeseeeeeeeeeeteees : | WYZE CAM OUTDOOR

Trade Mark .u……ccccecceececeeeecesceeseereeeeereeeanates : | WYZE

Manufacturer… eee eeeeeeeeeeeseneeeeeees : | TianJin HuaLai Technology Co.,Ltd.
Model/Type reference 0.0… ieee : |WVOD1

Ratings o.eceececcccecceceseecesceeesceceeaeseceeeaeseceeeesaeeeeeeeaeee : | Input: 5.0V 2221.5A or

Internal Battery with 7.4V, 2600mAh.

 

 

 

Testing procedure and testing location:

 

 

XX | Testing Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan)
Testing location/ address .0…..0.ceeeeeeeees : | No.69, Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan,
Guangdong, China

 

 

C1 | Associated Testing Laboratory:

 

Testing location/ address 0.0.0.0… ccccceeeeeeeees :

 

Tested by (name + signature)… : | Tom Li Tom L
v

 

Approved by (name + signature) ………….. : | Jeanne Han
lero

 

 

 

 

 

Report Number: R2010162-62368 Page 3 of 69 UL-CSA-62368 Second Edition Report

 

TianJin HuaLai Technology Co.,Ltd.

Model: WVOD1

 

 

List of attachments (including a total number of pages in each attachment):

1. US and Canadian National Differences (5 pages)
2. Circuit diagrams (3 pages)

3. EUT Photos (9 pages).

4. User’s manual information(1 page)

Total page count: 69 pages

 

Summary of testing:

 

Tests performed (name of test and test clause):
– 5.2.2.2Steady-state voltage and current

– 5.4.1.4Maximum operating temperature for insulating
materials

– 6.2.2Power source circuit classifications

– 8.7Equipment mounted to a wall or ceiling

– B.2.5Input test

– B.3Simulated abnormal operating conditions

– B.4Simulated single fault conditions

– F.3.10Test for permanence of markings

– M4 Additional safeguards for equipment containing a
secondary lithium battery

– T.5Steady force test, 250 N
– T.6Enclosure Impact test
– T.8Stress relief test

 

Testing location:
Bay Area Compliance Laboratories Corp. (Dongguan)

No.69, Pulongcun, Puxinhu Industry Area, Tangxia,
Dongguan, Guangdong, China

Testing Date:
May 28th, 2020 to Jul 22th, 2020

Test Engineer:
Tom Li

 

 

Summary of compliance with National Differences:

List of countries addressed

X|The product fulfils the requirements of UL 62368-1, Second Edition, December 1, 2014 and CAN/CSA-C22.2 No.
62368-1-14, Second Edition, AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY

EQUIPMENT – Part 1: Safety requirements.

 

 

 

Report Number: R2010162-62368 Page 4 of 69 UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd.

Model: WVOD1

 

 

 

Copy of Marking Plate

The artwork proposed in the facsimile may be only a draft. The use of certification marks on a final product must be
authorized by the respective Certification Bodies that have ownership those marks.

Specifications: Labels are printed in indelible ink on permanent adhesive backing or silk-screened and shall be affixed
at a conspicuous location on the EUT. The label cannot be positioned on a removable portion of the EUT (e.g. battery

cover).

 

 

 

WYZE CAM OUTDOOR

Model: WVOD1 5V S==15A
Made in China WYZE LABS, Inc.

ACh po
lee:

CANICSh CEE No. 2368-1
A00TS
FCC ID: 2ANJHWVODI1
IC: 24984-WVOD1
MAC: XXUXXXKX KKK

 

 

 

 

 

 

 

 

Report Number: R2010162-62368

Page 5 of 69 UL-CSA-62368 Second Edition Report

 

 

 

 

TEST ITEM PARTICULARS:

 

Classification of Use DY… cece eee eeeeeee eens eeeeeeteeeeeeeee :

&X Ordinary person
LIinstructed person

Clskilled person
X)children likely to be present

 

Supply Connection… ceeeeeceeee cee eeeseeseeeeeeeeeeeneee :

CJAC Mains [JDC Mains

PXJExternal Circuit – not Mains connected

-KlEs1 [JEs2 [JEs3

 

Supply % Tolerance 22.0… eee eee cee cece eee seneeeeeeeneeee :

1] +10%/-10%
L] +20%/-15%
[L1+__%/-___%

XX] None: Not directly connected to the mains

 

Supply Connection — Type oo… cece eeeeeceeeeeeeeeeee :

CJ pluggable equipment type A –
[Jnon-detachable supply cord
(appliance coupler

Cldirect plug-in

[Imating connector

| pluggable equipment type B –
[_Jnon-detachable supply cord
Cappliance coupler

(J permanent connection
C mating connector] other: Not directly connected to the
mains

 

Considered current rating of protective device as part of

building or equipment installation 00.00… eeeeeeeeeee :

_A: KIN/A
Installation location: [J building; equipment

 

Equipment mobility 20.0.0… ccc eee ceeeeee cesses eeseaeeeees :

[XJ movable [hand-held transportable
CJ stationary (J for building-in [J direct plug-in

(J rack-mounting [X] wall-mounted

 

 

 

Over voltage category (OVC) …cceccsscesseessessessestsstseeeenees : KJ OvcI CJ overt (0 ovc It
Clovc iv [_Jother:

Class of equipment 20… ecceecescecceeceeeeseeeeeeeneeeseeaeees : | [1 Class I CJ Class II KX Class II

ACCESS LOCATION 2.0… ccc eeccceceeccescsesescceesseeeesseeeessceseseeeesaes : | J restricted access location KI N/A

 

Pollution degree (PD) o….cececcecceccesceeceeeeseeeeeeeeeneeeeeeaeees :

Cipp 1 &) pp 20] ep 3

 

Manufacturer’s specified maxium operating ambient …… :

40°C

 

TP protection ClaSS …….eccceccecceceseeeceeceeeeeeseeeteaeeeeeeseeaeeas :

Xwxo OP _

 

Power Systems 20.00… cece cece cece eee eee scence seae eae eneeneees :

Om OTTDiT-_ vii N/A

 

 

 

 

 

 

 

 

 

 

Altitude during operation (M) 20.0.0… cceeeeeeeeeeeeeettees : 1K) 2000 morless [J]. em
Altitude of test laboratory (M) 0.00… ieee eeeeeeerereeeeee : 1) 2000 morless [J]. m
Mass of equipment (Kg) oo… ceeeeeeeeeeeeceeeeteeseeseeneeteees : |0.223kg

POSSIBLE TEST CASE VERDICTS:

– test case does not apply to the test object… 2) N/A

– test object does meet the requirement… : | P (Pass)

– test object does not meet the requirement… : | F (Fail)

 

 

 

 

 

TianJin HuaLai Technology Co.,Ltd.

Model: WVOD1

 

TESTING:

 

Date of receipt of test (tem… cceceeceeeeceeeeeeeeeeeeeneeeees :

2020-05-27

 

Date (s) of performance of tests 20.0.0… ceceecceeeeccesceeeeeeeeeeeeeees :

2020-05-28 to 2020-07-22

 

 

 

GENERAL REMARKS:

 

“(See Enclosure #)” refers to additional information appended to the report.
“(See appended table)” refers to a table appended to the report.

Throughout this report a [-] comma / X] point is used as the decimal separator.

 

When differences exist; they shall be identified in the General product information section.

 

Name and address of factory (i€s) ……….sssssessseessereeees :

 

Name:
Tianjin FULAIDI Communication Equipment Co., Ltd.
Address:

Third and fourth floors, left building, No.7, Jianshe Ist
branch road, Balitai Industrial Park, Balitai Town, Jinnan
District, Tianjin, China

 

GENERAL PRODUCT INFORMATION:

 

Product Description —

1. The EUT is the WYZE CAM OUTDOOR which is used for recording photo or video. It is rated for 5.0V =, 1.5A
which can be supplied from any external SVdc power supply or the internal battery rated for 7.4V, 2600mAh,

19.24Wh.
2. The circuits of EUT are considered as ES1 circuits.

3. Instructions and equipment marking related to safety is applied in the language that is acceptable in the country in

which the equipment is to be sold.

4. The product was submitted and tested for use at the manufacturer’s recommended ambient temperature (Tma) of

40°C.

5. Maximum normal load: The EUT was supplied by 5Vdc or 7.4Vde and connected to mobile phone wirelessly, and

the camera was recording video continuously.

 

Model Differences —
N/A

 

 

Additional application considerations — (Considerations used to test a component or sub-assembly) —

N/A

 

 

 

Report Number: R2010162-62368

Page 7 of 69

UL-CSA-62368 Second Edition Report

 

 

 

 

ENERGY SOURCE IDENTIFICATION AND CLASSIFICATION TABLE:

 

(Note 1: Identify the following six (6) energy source forms based on the origin of the energy.)
(Note 2: The identified classification e.g., ES2, TS1, should be with respect to its ability to cause pain or injury on the body
or its ability to ignite a combustible material. Any energy source can be declared Class 3 as a worse case classification e.g.

PS3, ES3.

 

Electrically-caused injury (Clause 5):

(Note: Identify type of source, list sub-assembly or circuit designation and corresponding energy source classification)

 

 

 

 

 

Example: +5 V de input 2.0.0… ccccecceccccceccecececeseececeacececceeacecseceeseacacacseceeseacaecaeaeacecaesesaeecaeseeaeacaeseeseaeescaeeacescaeeeceeeeaeeeeacees ES1
Source of electrical energy Corresponding classification (ES)

EUT input ES1

Battery pack output ES1

Electrically-caused fire (Clause 6):

(Note: List sub-assembly or circuit designation and corresponding energy source classification)

Example: Battery pack (maximum 85 watts): ………ccccccssseccsceeeeeeeceeeeeceeeeceeeeaceeeeaceeeeaceeeeaseeeeaseeeeaceeeeaceeeeaseeeeateeeeeeeeees PS2

 

Source of power or PIS

Corresponding classification (PS)

 

EUT input (5Vdc)

PS1

 

Battery pack output

 

PS3

 

Injury caused by hazardous substances (Clause 7)

(Note: Specify hazardous chemicals, whether produces ozone or other chemical construction not addressed as part of the

component evaluation.)

Example: Liquid in filled component…….0..0.0:c:ccceeeseereeees

 

Source of hazardous substances

Corresponding chemical

 

Li-ion(Polymer)battery

 

Li-ion

 

Mechanically-caused injury (Clause 8)

(Note: List moving part(s), fan, special installations, etc. & corresponding MS classification based on Table 35.)

 

 

 

 

 

 

 

 

 

 

 

Example: Wall mount unit MS2
Source of kinetic/mechanical energy Corresponding classification (MS)

Sharp edges and corners do not cause pain or injury MSI

Equipment mass<7kg MSI

Equipment massS 1kg, Mounting height > 2m MS3

Thermal burn injury (Clause 9)

(Note: Identify the surface or support, and corresponding energy source classification based on type of part, location,
operating temperature and contact time in Table 38.)

Example: Hand-held scanner — thermoplastic enclosure ………..:.:ccccccccecceseecceeceeceeceeeeeeceeceeaeeeeeeeeeaeeaeeaeeeseeaeeceeeensensees TSI
Source of thermal energy Corresponding classification (TS)

Plastic enclosure TS1

Radiation (Clause 10)

(Note: List the types of radiation present in the product and the corresponding energy source classification.)

Example: DVD — Class 1 Laser Product ..0…..0..:cccccccecceccceccecceseescesceaceeceeeeescesceaceeeeseecceeaceaecaeeeseeaeeaceaeeaeeeaeeeceeaeeeeesess RS1

 

Type of radiation

Corresponding classification (RS)

 

 

LED indicator—Exempt group

 

RS1

 

 

 

 

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

 

 

ENERGY SOURCE DIAGRAM

 

Indicate which energy sources are included in the energy source diagram. Insert diagram below

 

 

Xres Kips Wms rs Mrs

Ordinary
person

Basic safeguard — No Supplementary

PS3 ignition and no part safeguard — V-0 plastic > Ordinary
exceeding 90% of its enclosure and V-1 person
temperature limit printed wiring, <4KW

 

 

Basic safeguard required

 

MS3 — Robust mounting means Ordinary
Supplementary safeguard person
required — Instructions
and training

No safeguard required — Ordinary

TS1 Plastic enclosure did not

person
exceed 48°C and 77°C

RSI No safeguard required — Ordinary

LED indicator used person

 

 

 

 

 

Report Number: R2010162-62368 Page 9 of 69 UL-CSA-62368 Second Edition Report

 

 

 

OVERVIEW OF EMPLOYEDSAFEGUARDS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Possible Hazard
5.1 Electrically-caused injury
Body Part Energy Source Safeguards
.g. Ordi ES3: Pri Filter circuit
(¢-g. Ordinary) ( timary Filter circuit) Basic Supplementary | Reinforced
(Enclosure)
Ordinary ES1:EUT input N/A N/A N/A
Ordinary ES1: Battery pack output N/A N/A N/A
6.1 Electrically-caused fire
Material part Energy Source Safeguards
(e.g. mouse enclosure) (PS2: 100 Watt circuit) Basic See eee
Enclosure PS1:EUT input (5Vdc) N/A N/A N/A
Enclosure PS3:Battery pack output No ignition V-0 enclosure N/A
and no part used. All
exceeding 90% | components are
of its mounted on the
temperature Min.V-1 PCB.
limit The battery
comply with
Annex M.
7A Injury caused by hazardous substances
Body Part Energy Source Safeguards
.g., Skilled hazard terial
(¢-8., skilled) (hazardous material) Basic Supplementary | Reinforced
. a See Annex M N/A N/A
Ordinary Li-ion and Annex T
8.1 Mechanically-caused injury
Body Part Energy Source Safeguards
(e.g. Ordinary) (MS3-High Pressure Lamp) Basic Supplementary | Reinforced
(Enclosure)
Ordinary MS1: Equipment mass less than N/A N/A N/A
Tkg
Ordinary MS1: Sharp edges and comers N/A N/A N/A
(none)
Ordinary MS3: Equipment mass< lkg, Robust Instructions and N/A
Mounting height >2m mounting training
means
9.1 Thermal Burn
Body Part Energy Source Safeguards
-g., Ordi TS2
(¢-g., Ordinary) (TS2) Basic Supplementary | Reinforced
Ordinary TS1: Accessible surface N/A N/A N/A
10.1 Radiation
Body Part Energy Source Safeguards
.g., Ordi Output fr di t
(¢-g., Ordinary) (Output trom audio port) Basic Supplementary | Reinforced
Ordinary RS1: LED indicator — Exempt N/A N/A N/A

 

group

 

 

 

 

 

 

 

 

TianJin HuaLai Technology Co.,Ltd.

Model: WVOD1

 

 

 

Supplementary Information:

(1) See attached energy source diagram for additional details.
(2) “N” — Normal Condition, “A” — Abnormal Condition; “S” Single Fault.

 

 

 

Report Number: R2010162-62368

Page 11 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
4 GENERAL REQUIREMENTS
4.1.1 Acceptance of materials, components and
subassemblies
4.1.2 Use of components Components are Certified P
(See appended table 4.1.2)
4.1.3 Equipment design and construction P
4.1.15 Markings and instructions….0..0.ccececeeeeeeeeereeteeeeeee : (See Annex F) P
444 Safeguard robustness P
44.4.2 Steady force tests 00… ccc cence eens eeeeeneseeeeneeaees : (See Annex T.5) P
444.3 Dip tests… eeeeececesccenceesceeeeeeeaceceeecaeeeaeeeteeeeeesenesees : N/A
4.4.4.4 Tmpact tests …..ceccecccesceecceeseeceecceeesaeeeeeeieeeeeeseneseees : (See Annex T.6) P
4.4.4.5 Internal accessible safeguard enclosure and barrier No such Internal accessible enclosure N/A
LOSES eee eee cee eee ceeeeeeeeeeeececeaeaeseseeeaesaeeeeaesaseeeneeases : | and barrier
4.4.4.6 Glass Impact tests .0…ccccecceeccecceecesecceeeeeeeeeeeeeeneeaeeaes : N/A
44.4.7 Thermoplastic material tests ………0.cccceeeeeeeeeeeees : (See Annex T.8) P
44.4.8 Air comprising a safeguard… ccececeeeeeeeeeeeeeeeees : N/A
4.4.4.9 Accessibility and safeguard effectiveness All safeguards remain effective. P
45 Explosion Compliance is checked by inspection P
and tests as specified in Clause B.2,
Clause B.3, Clause B.4, and Annex
M.
4.6 Fixing of conductors No such fixing of conductors N/A
4.6.1 Fix conductors not to defeat a safeguard N/A
4.6.2 10 N force test applied too… ececeeseeeeeeeeeeeeeeeees : N/A
47 Equipment for direct insertion into mains socket – Class IIT equipment N/A
outlets
4.7.2 Mains plug part complies with the relevant standard: N/A
4.7.3 Torque (NM) .0…..ccecceeeceeseeseeeaeecceeeeaeeeeeeeeeeeesenesees : N/A
4.8 Products containing coin/button cell batteries No button cell battery N/A
4.8.2 Instructional safeguard N/A
4.8.3 Battery Compartment Construction N/A
Means to reduce the possibility of children removing —
the battery oo… cece e ee eee eee eee e tee seateeneaeeaes :
4.8.4 Battery Compartment Mechanical Tests…….0..0.00.. : N/A
4.8.5 Battery Accessibility N/A
4.9 Likelihood of fire or shock due to entry of conductive No openings. N/A

 

ODJOCE eee cece eee ceeeeeeeeeeceeeeeaeseeeeeaesaeeeeaeseeeeeeaees :

 

 

 

 

 

Report Number: R2010162-62368

Page 12 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
5 ELECTRICALLY-CAUSED INJURY P
5.2.1 Electrical energy source classifications …..0…..0eee : (See appended table 5.2) P
5.2.2 ES1, ES2 and ES3 limits ES1 P
5.2.2.2 Steady-state voltage and CUTTeNt eects : (See appended table 5.2) P
5.2.2.3 Capacitance Limits 0.0… ceceeceeecccceeeeeeeeeeeceeeeceseateesees : | No such electrical energy source N/A
5.2.2.4 Single pulse Limits 2… cceeeeceeeeeeeeeeeeeceeeeceseeteeeees : | No such electrical energy source N/A
5.2.2.5 Limits for repetitive pulses …0…0.cccceeeeeeeceeceeeeeeeteeeees : | No such electrical energy source N/A
5.2.2.6 Ringing sigmals ….0….cecccccececesecceeceeeeeeeeeceeeeceseateesees : No such electrical energy source N/A
5.2.2.7 Audio Signals …….ccccecccccececeeeeeeceeeceeeeeeeeceeeeeeeeateesees : N/A
5.3 Protection against electrical energy sources EUT is rated for ESI only. No N/A
safeguards needed
5.3.1 General Requirements for accessible parts to ordinary,
instructed and skilled persons N/A
5.3.2.1 Accessibility to electrical energy sources and safeguards N/A
5.3.2.2 Contact requirements N/A
a) Test with test probe from Annex Vo… cece : N/A
b) Electric strength test potential (V) …… cee : N/A
C) Adit gap (MIM) oe cece cee ceeeeeeeeceeeeceeeeeeceeeeceeeateesees : N/A
5.3.2.4 Terminals for connecting stripped wire N/A
5.4 Insulation materials and requirements P
5.4.1.2 Properties of insulating material N/A
5.4.1.3 Humidity conditioning… eects! N/A
5.4.14 Maximum operating temperature for insulating materials | (See appended table 5.4.1.4) P
5.4.15 Pollution degree… cecececccceeeeeceeeeeeeeeeeseeeeeeseateesees : | Pollution degree 2 —
5.4.1.5.2 Test for pollution degree 1 environment and for an N/A
insulating compound
5.4.1.5.3 Thermal cycling N/A
5.4.1.6 Insulation in transformers with varying dimensions N/A
5.4.1.7 Insulation in circuits generating starting pulses N/A
5.4.1.8 Determination of working voltage N/A
5.4.1.9 Insulating surfaces N/A
5.4.1.10 Thermoplastic parts on which conductive metallic parts N/A
are directly mounted
5.4.1.10.2 Vicat softening temperature… eeeeceeeeeceeeeeeeeees : N/A
5.4.1.10.3 Ball pressure 20.0… .ceccccecceceeeceseeeeeeseeecceeeseeeeeceeeeaceeeateesees : N/A
5.4.2 Clearances Class IIT equipment. N/A
5.4.2.2 Determining clearance using peak working voltage N/A

 

 

 

 

 

 

Report Number: R2010162-62368 Page 13 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
5.4.2.3 Determining clearance using required withstand voltage . N/A
a) a.c. mains transient voltage… cece eesceeeeeeeeeeeees : —
b) dic. mains transient voltage 2.0… ceeeeeeeeeeeeeees : —
c) external circuit transient voltage .0…0.. eee : —
d) transient voltage determined by measurement…….. : —
5.4.2.4 Determining the adequacy of a clearance using an N/A
electric strength test
5.4.2.5 Multiplication factors for clearances and test voltages …… N/A
5.4.3 Creepage distances 2… ccc ccceecceeeeceeeeeeceeeeceseateesees : | Class IIT equipment, only ES1 circuits. N/A
5.4.3.1 General N/A
5.4.3.3 Material Group oo… ceceececeeeeeeeceecceeeeeeeeeseeeeneeeeatees : —
5.44 Solid insulation Class IIT equipment N/A
5.4.4.2 Minimum distance through insulation 0.0.00… : N/A
5.443 Insulation compound forming solid insulation N/A
S444 Solid insulation in semiconductor devices N/A
5.44.5 Cemented joints N/A
5.44.6 Thin sheet material N/A
5.44.6.1 General requirements N/A
5.4.4.6.2 Separable thin sheet material N/A
Number of layers (PCS) …….ceeeeeeeeeseeeeeeeseeeeeeeeaees : N/A
5.44.6.3 Non-separable thin sheet material NIA
5.4.4.6.4 Standard test procedure for non-separable thin sheet N/A
materia) ec eee cece eee cee ceeee cece seneee see seeeeeenecaeeesens :
5.4.4.6.5 Mandrel test N/A
5.4.4.7 Solid insulation in wound components N/A
5.4.4.9 Solid insulation at frequencies >30 KHz…….00.e : N/A
5.45 Antenna terminal insulation No antenna terminal N/A
5.4.5.1 General N/A
5.4.5.2 Voltage surge test N/A
Insulation resistance (MQQ) ………cccececseeeeseseeseeeeeeeees : —
5.4.6 Insulation of internal wire as part of supplementary
Safeguard oo… ecccccecceseceeceececeaeceeeeceeeeteeseeneeseeseeseeee! N/A
5.4.7 Tests for semiconductor components and for cemented | No such component used N/A
joints
5.4.8 Humidity conditioning Class III equipment, only ES1 circuits. N/A

 

Relative humidity (%)……..ccccceceeeseeeeeneeeeenee!

 

 

 

Temperature (CC) occ cccsesescesceeceeceeeceeeeeeeeeaeeaeaeeetes :

 

 

 

 

 

Report Number: R2010162-62368 Page 14 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
Duration (1)… ceeeeeeeceseeeeseseaeeeseseeeeeenee! =
5.4.9 Electric strength test… eet | Class IT equipment, only ES1 circuits. N/A
5.4.9.1 Test procedure for a solid insulation type test N/A
5.4.9.2 Test procedure for routine tests N/A
5.4.10 Protection against transient voltages between external | Not connect to external circuit. N/A
circuit
5.4.10.1 Parts and circuits separated from external circuits N/A
5.4.10.2 Test methods N/A
5.4.10.2.1 General N/A
5.4.10.2.2 Impulse test… eee eee cee cee eee eee eeeeeeteeeeeeeeneenee! N/A
5.4.10.2.3 Steady-state test 0… cece cesses ceeseeseetenseenel N/A
5.4.11 Insulation between external circuits and earthed Class III equipment, only ES1 circuits. N/A
S.A1LL Exceptions to separation between external circuits and N/A
earth
5.4.11.2 Requirements N/A
Rated operating voltage Uop(V) …..::sceeseeeeeeeeeee!
Nominal voltage Upeak(V) ……eceseeseeeeeeeeeeneeeeee!
Max increase due to variation Usp…….e eee!
Max increase due to ageing AU sa… eeeeeeceeettetereee!
Uop= Upeakt AU spt AUsa ..eeeeeeeceeeeceeseeeeeeeseeeeeeneneeeee!
5.5 Components as safeguards
5.5.1 General No such component used N/A
5.5.2 Capacitors and RC units No such component used N/A
5.5.2.1 General requirement N/A
5.5.2.2 Safeguards against capacitor discharge after N/A
disconnection of a connector 0.0.0… cee!
5.5.3 Transformers No such component used N/A
5.5.4 Optocouplers No such component used N/A
5.5.5 Relays No such component used N/A
5.5.6 Resistors No such component used N/A
5.5.7 SPD’s No such component used N/A
5.5.7.1 Use of an SPD connected to reliable earthing N/A
5.5.7.2 Use of an SPD between mains and protective earth N/A
5.5.8 Insulation between the mains and external circuit Not connect to mains and external N/A
consisting of a coaxial cable occ? — | Circuit
5.6 Protective conductor N/A
5.6.2 Requirement for protective conductors Class III equipment, only ES1 circuits. N/A

 

 

 

Report Number: R2010162-62368 Page 15 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
5.6.2.1 General requirements N/A
5.6.2.2 Colour of insulation N/A
5.6.3 Requirement for protective earthing conductors Class III equipment, only ES1 circuits. N/A

Protective earthing conductor size (mM?) ………..cc!
5.6.4 Requirement for protective bonding conductors Class III equipment, only ES1 circuits. N/A
5.6.4.1 Protective bonding conductors N/A
Protective bonding conductor size (mm). ………ec0! —
Protective current rating (A) …….cccececeeeeeeeeeeeeeeeteeees : —
5.6.4.3 Current limiting and overcurrent protective devices N/A
5.6.5 Terminals for protective conductors Class III equipment, only ES1 circuits. N/A
5.6.5.1 Requirement N/A
Conductor size (mm), nominal thread diameter (mm). .. N/A
5.6.5.2 Corrosion N/A
5.6.6 Resistance of the protective system N/A
5.6.6.1 Requirements N/A
5.6.6.2 Test Method Resistance (Q) ……cccccccccesseseseeeseeeneeel N/A
5.6.7 Reliable earthing N/A
3.7 Prospective touch voltage, touch current and protective conductor current N/A
5.7.2 Measuring devices and networks N/A
5.7.2.1 Measurement of touch current ..0….0… tees! N/A
5.7.2.2 Measurement of prospective touch voltage N/A
5.7.3 Equipment set-up, supply connections and earth N/A
connections
System of interconnected equipment (separate _
connections/single connection) ..0…….cceeeeeeeeeeereereeel
Multiple connections to mains (one connection at a _
time/simultaneous connections)…………0ccccseeeeeeeeeel
5.7.4 Earthed conductive accessible parts… cess! N/A
5.7.5 Protective conductor current N/A
Supply Voltage (V) occ eee eects ceeeeeeeneeneenel —
Measured current (MA)……….ccccccccteeseeseeeeeceseeeeeeeel —
Instructional Safeguard «2.00.0… ccccecceeeeeeeeteeeeeeeeeeeeeeeel N/A
5.7.6 Prospective touch voltage and touch current due to N/A
external circuits
5.7.6.1 Touch current from coaxial cables N/A
5.7.6.2 Prospective touch voltage and touch current from N/A
external circuits
5.7.7 Summation of touch currents from external circuits N/A

 

 

 

 

 

 

Report Number: R2010162-62368 Page 16 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
a) Equipment with earthed external circuits Measured
N/A
Current (MA) 2… eee ccc ceeee cece eeeenaeeeeeeeeeseaeeeesteeesseeeee!
b) Equipment whose external circuits are not N/A
referenced to earth. Measured current (MA)………0…..:
6 ELECTRICALLY- CAUSED FIRE P
6.2 Classification of power sources (PS) and potential ignition sources (PIS) P
6.2.2 Power source circuit classifications PS3 P
6.2.2.1 General P
6.2.2.2 Power measurement for worst-case load fault ………… : | (See appended table 6.2.2) P
6.2.2.3 Power measurement for worst-case power source fault ….) (See appended table 6.2.2) P
6.2.2.4 PSL ieee cecceceeceesescescaesecessesceeaeseeeeeaeaeeeseeseaeeacaeeeseeeees : | (See appended table 6.2.2) P
6.2.2.5 PS2 eececceeceeccceeceesescescaeee cesses ceeaceceeseeaeaeeceeseaeeacaeeeseeeees : | (See appended table 6.2.2) N/A
6.2.2.6 PSB ceeceececssescscescotsescecaeeeceesesceeeaeeeeeeeeaeacseserseaeeaeateeseeeeas : | (See appended table 6.2.2) P
6.2.3 Classification of potential ignition sources P
6.2.3.1 Arcing PIS ooo cece ceceeeceseeeeeeeeecceeeseaceecereaeeecateeseneeas : N/A
6.2.3.2 Resistive PIS oo. cccecccecccecceceeeseeeeceeeaeeeeeceeseeeecaeeeseeeees : (See appended table 6.2.3.2) P
63 Safeguards against fire under normal operating and abnormal operating conditions P
6.3.1 (a) No ignition and attainable temperature value less than No ignition occurred, and no part of the
90 % defined by ISO 871 or less than 300 °C for equipment attained a temperature value P
unknown materials ……….000cccccecccescsessseeseeesseesseeeeeeeee : greater than 300 °C.
6.3.1 (b) Combustible materials outside fire enclosure N/A
64 Safeguards against fire under single fault conditions P
64.1 Safeguard Method The method for control fire spread is
used (All components were mounted P
on the Min. V-1 PCB, V-0 plastic
enclosure used)
6.4.2 Reduction of the likelihood of ignition under single fault
ve Ls N/A
conditions in PS1 circuits
6.4.3 Reduction of the likelihood of ignition under single fault | The method for control fire spread is
ve on N/A
conditions in PS2 and PS3 circuits used.
6.4.3.1 General N/A
6.4.3.2 Supplementary Safeguards N/A
Special conditions if conductors on printed boards are
N/A
opened or peeled
6.4.3.3 Single Fault Conditions 20.0.0. cceececceeceeeeeeeeeeeeeseeeees : N/A
Special conditions for temperature limited by fuse N/A
6.4.4 Control of fire spread in PS1 circuits No safeguard required for PS1 N/A
6.4.5 Control of fire spread in PS2 circuits N/A
6.4.5.2 Supplementary safeguards 20.0.0… cee eeeeeeees : N/A

 

 

 

 

 

 

Report Number: R2010162-62368

Page 17 of 69

UL-CSA-62368 Second Edition Report

 

 

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
6.4.6 Control of fire spread in PS3 circuit V-0 plastic enclosure and Min V-1 Pp
PCB used.
6.4.7 Separation of combustible materials from a PIS Not used this method, fire enclosure N/A
used
6.4.7.1 Goereral oo… ecceceeeececeeececeseeaeeeeeesaeeeeeesaneeeeeanatees : N/A
6.4.7.2 Separation by distance N/A
6.4.7.3 Separation by a fire barrier N/A
6.4.8 Fire enclosures and fire barriers P
6.4.8.1 Fire enclosure and fire barrier material properties V-Oplastic enclosure used P
6.4.8.2.1 Requirements for a fire barrier N/A
6.4.8.2.2 Requirements for a fire enclosure V-Oplastic enclosure used P
6.4.8.3 Constructional requirements for a fire enclosure and a
: : N/A
fire barrier
6.4.8.3.1 Fire enclosure and fire barrier openings Fire enclosure has no openings N/A
6.4.8.3.2 Fire barrier dimensions N/A
6.4.8.3.3 Top Openings in Fire Enclosure: dimensions(mm) …: N/A
Needle Flame test N/A
6.4.8.3.4 Bottom Openings in Fire Enclosure, condition met a),
. : N/A
b) and/or c) dimensions (MM) …………ccccseteseeeeeeteteeee :
Flammability tests for the bottom of a fire enclosure .: N/A
64.8.3.5 Integrity of the fire enclosure, condition met: a), b) o N/A
C+) oececccececcneceeeeesceeeecaaeeeeceeecesaaeesceeeeaeeeeeeeeeesneeeseeeeess :
6.4.8.4 Separation of PIS from fire enclosure and fire barrier | V-Oplastic enclosure used P
distance (mm) or flammability rating 0.0.
65 Internal and external wiring
6.5.1 Requirements
6.5.2 Cross-sectional area (MM?) ……..c.cccssecceesseseeeesereeeeees : | (See appended table 4.1.2) —
6.5.3 Requirements for interconnection to building wiring .. : N/A
6.6 Safeguards against fire due to connection to additional N/A
equipment
External port limited to PS2 or complies with Clause
N/A
Q.1
7 INJURY CAUSED BY HAZARDOUS SUBSTANCES P
7.2 Reduction of exposure to hazardous substances See Annex T and Annex M P
73 Ozone exposure N/A
TA Use of personal safeguards (PPE) N/A
Personal safeguards and instructions …………0.ceee : —
75 Use of instructional safeguards and instructions N/A

 

 

 

 

 

 

 

 

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
Instructional safeguard (ISO 7010)……..eeeeeeeeeee! —_
7.6 Batteries 2.0… ccc eceeeeececeeeneceeeeeneceeeeneseeeeeneeaces : | See Annex M P
8 MECHANICALLY-CAUSED INJURY
8.1 General
8.2 Mechanical energy source classifications MSI:
No sharp edges or corners.
Mass less than 7 kg
MS3:
Wall mounting height > 2m
8.3 Safeguards against mechanical energy sources MS3 is evaluated in clause 8.7 P
8.4 Safeguards against parts with sharp edges and corners Accessible edges and corners of the N/A
equipment are rounded and are
classified as MS1.
8.4.1 Safeguards N/A
8.5 Safeguards against moving parts No moving parts N/A
8.5.1 MS2 or MS3 part required to be accessible for the
. : N/A
function of the equipment
8.5.2 Instructional Safe guard… cceceeeseeceeceeeeeeeeeeeeeeeees : —
8.5.4 Special categories of equipment comprising moving N/A
parts
8.5.4.1 Large data storage equipment N/A
8.5.4.2 Equipment having electromechanical device for
: : N/A
destruction of media
8.5.4.2.1 Safeguards and Safety Interlocks .0..0… eee! N/A
8.5.4.2.2 Instructional safeguards against moving parts N/A
Instructional Safeguard… cceeeececceeeeeeeeeeteeeeeeeeeeeee! —
8.5.4.2.3 Disconnection from the supply N/A
8.5.4.2.4 Probe type and force (N) ……cee eee eeseeee sees eeeeeeee! N/A
8.5.5 High Pressure Lamps No high pressure lamps in EUT N/A
8.5.5.1 Energy Source Classification N/A
8.5.5.2 High Pressure Lamp Explosion Test…….ccceseeeeee! N/A
8.6 Stability MS1, Mass < 7 kg, no stability N/A
requirements
8.6.1 Product classification N/A
Instructional Safeguard… cceeeececceeeeeeeeeeteeeeeeeeeeeee! —
8.6.2 Static stability N/A
8.6.2.2 Static stability test N/A

 

 

 

Applied Force 22.0… cccccceccecececeeeeeeeeeeeeceeeeaceecareeseneeaeees :

 

 

 

 

 

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
8.6.2.3 Downward Force Test N/A
8.6.3 Relocation stability test N/A

Unit configuration during 10° tilt… eee : —
8.6.4 Glass slide test N/A
8.6.5 Horizontal force test (Applied Force)… eee : N/A
Position of feet or movable parts… : —
8.7 Equipment mounted to wall or ceiling MS3: Equipment masss 1 kg, Mounting Pp
height >2m
8.7.1 Mounting Means (Length of screws (mm) and mounting Used test 1 and test 3 P
SUIFACE) oe.eeececcseseesessesseeceecaseseesseessesaesseseeesecsseseeseeeeeeeaes :
8.7.2 Direction and applied force .0…0.. cece ceeeeeeeeceeceeeeeeeseeeees : | Three times the weight of the
equipment, | min, after test, no
hazards.50 N, 60s, after test, no
hazards. P
Screw diameter : 5.1mm, Torque:
2.0Nm
8.8 Handles strength No handles used N/A
8.8.1 Classification N/A
8.8.2 Applied Force o..cccecccccecsceceeceeeseeeeeeeseeseaeeeceteeneneeaeees : N/A
8.9 Wheels or casters attachment requirements No wheels or casters used N/A
8.9.1 Classification N/A
8.9.2 Applied force oe. cee cceeeeeeeseeeeeeeeteeeeteeeenteeeeate : —
8.10 Carts, stands and similar carriers No Carts, stands and similar carriers N/A
used
8.10.1 General N/A
8.10.2 Marking and instructions N/A
Instructional Safe guard… ceceeseeceeeeteeeeeeeeeeeeeeaeees : —
8.10.3 Cart, stand or carrier loading test and compliance N/A
Applied force 2… cece ccecceceeecesceeeceeeaeeeeeceeseaceecaeeeseneeatees : —
8.10.4 Cart, stand or carrier impact test N/A
8.10.5 Mechanical stability N/A
Applied horizontal force (N) ……:cccccceesesteeceseeteeeeeeeeeees : —
8.10.6 Thermoplastic temperature stability (°C)… eee : N/A
8.11 Mounting means for rack mounted equipment Not rack mounted equipment N/A
8.11.1 General N/A
8.11.2 Product Classification N/A
8.11.3 Mechanical strength test, variable N oo… N/A
8.11.4 Mechanical strength test 25ON, including end stops N/A

 

 

 

Report Number: R2010162-62368

Page 20 of 69

UL-CSA-62368 Second Edition Report

 

 

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
8.12 Telescoping or rod antennas 0.0.0… eee eeeeeeeeeees No such telescoping or rod antennas N/A
used
Button/Ball diameter (MM)………….cccccceeecsseseseeeeee! —
9 THERMAL BURN INJURY P
9.2 Thermal energy source classifications The EUT considered be as TS1, P
refer to the appended table 5.4.1.4,
B.3,B.4
9.3 Safeguard against thermal energy sources Measured temperature for external N/A
enclosure does not exceed TS1 limit.
9.4 Requirements for safeguards N/A
94.1 Equipment safeguard Measured temperature for external N/A
enclosure does not exceed TS1 limit.
9.4.2 Instructional safeguard 0… ….ccececcecseseeceeeseeeeeeeceeeeeeeeees : N/A
10 RADIATION
10.2 Radiation energy source classification LED indicator—Exempt group
10.2.1 General classification RSL
10.3 Protection against laser radiation No laser within the EUT N/A
Laser radiation that exists equipment: —
Normal, abnormal, single-fault ………0. ccc : N/A
Instructional safeguard… ceccececeeeeceeeeseeteeeeeeees : —
TOO]. cece ecee ce eee cee c esas te seeeeaeeae cases sneeseeneeeneees : —
10.4 Protection against visible, infrared, and UV radiation | See below N/A
10.4.1 General Indicator light, RS1 N/A
10.4.1.a) RS3 for Ordinary and instructed persons……….00.00. : N/A
10.4.1.b) RS3 accessible to a skilled person ……….ecceeeeeeees : N/A
Personal safeguard (PPE) instructional safeguard …… : —
10.4.1.c) Equipment visible, IR, UV does not exceed RS1 ………: N/A
10.4.1.d) Normal, abnormal, single-fault conditions «0.0.0.0… : N/A
10.4.1.e) Enclosure material employed as safeguard is opaque. : N/A
10.4.1.f) UV attenuation… cc cece cee ceeeeceseeeseseeeenseensees : N/A
10.4.1.g) Materials resistant to degradation UV 000… : N/A
10.4.1.h) Enclosure containment of optical radiation ……….0…. : N/A
10.4.1.i) Exempt Group under normal operating conditions…..: N/A
10.4.2 Instructional safeguard… ceccececeeeeceeeeseeteeeeeeees : | RS1, not need safeguard N/A
10.5 Protection against x-radiation No x-radiation N/A
10.5.1 X- radiation energy source that exists equipment……: N/A

 

 

 

 

 

 

 

 

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
Normal, abnormal, single fault conditions N/A
Equipment safeguards …….0..cecceeccecceseecceeceeeeeeeeeeseteaes : N/A
Instructional safeguard for skilled person… ee! N/A
10.5.3 Most unfavourable supply voltage to give maximum —
TAGLAION ooo eee cece ceceeeeeceeceesaceeeeesaeeecaeseeeeeaeseeeaeatees :
Abnormal and single-fault condition ……..0… eee : N/A
Maximum radiation (pA/Kg) «0.0… ce ececeeeeeeeeteeeeeees : N/A
10.6 Protection against acoustic energy sources N/A
10.6.1 General N/A
10.6.2 Classification N/A
Acoustic output, dB(A)… ce ececceeceecceeeeeeeeeeeeneeeeees : N/A
Output voltage, unweighted £.M.8. 0.0… eeeeeeeeees : N/A
10.6.4 Protection of persons N/A
Instructional safeguards 000.00… ceeceeceeceeeeeeeeeeeeeeeeeeees : N/A
Equipment safeguard prevent ordinary person to RS2 .. —
Means to actively inform user of increase sound —
PTCSSULC oo. cee cee eee ceeeeceeeeeeecaeeeeaesaeeseaesaseseaeeatees :
Equipment safeguard prevent ordinary person to RS2… —
10.6.5 Requirements for listening devices (headphones, N/A
earphones, etc.)
10.6.5.1 Corded passive listening devices with analog input N/A
Input voltage with 94 dB(A) Laegacoustic pressure —
OULDUE oe ceeceeeeeceeeeecaeeeeaecaeeeeaesaseseaesaseeeaeeatees :
10.6.5.2 Corded listening devices with digital input N/A
Maximum dB(A) ……..cccccccsecseesecsescessceseeesseesseeesees : —
10.6.5.3 Cordless listening device N/A
Maximum dB(A) ……..cccccccsecseesecsescessceseeesseesseeesees : —
B NORMAL OPERATING CONDITION TESTS, ABNORMAL OPERATING P
CONDITION TESTS AND SINGLE FAULT CONDITION TESTS
B.2 Normal Operating Conditions
B.2.1 General requirements …..0….ccececeeeeceeeceeeeeeeeeseeeeeaeeee : | (See Test Item Particulars and
appended test tables)
Audio Amplifiers and equipment with audio amplifiers | (See Test Item Particulars and P
appended test tables)
B.2.3 Supply voltage and tolerances Rated voltage P
B.2.5 Input test 2.2… ec ccecccecceeceeeeseeececeeeeseeseaeeeeeeceeeeeeeaeeaeees : | (See appended table B.2.5) P
B3 Simulated abnormal operating conditions P
B3.1 General requirements …..0….ccececeeeeceeeceeeeeeeeeseeeeeaeeee : | (See appended table B.3) P

 

 

 

 

 

 

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
B.3.2 Covering of ventilation openings N/A
B.3.3 D.C. mains polarity test N/A
B34 Setting of voltage selector oo… cece eceeeeeeeeeteeeeeee : N/A
B.3.5 Maximum load at output terminals… eee! N/A
B.3.6 Reverse battery polarity N/A
B.3.7 Abnormal operating conditions as specified in Clause P

E.2.
B.3.8 Safeguards functional during and after abnormal All safeguards remain effective P
operating conditions
BA Simulated single fault conditions P
B.4.2 Temperature controlling device open or short- No such parts used for the equipment N/A
CHECUILEI eee eee eects cee ete ceaeteetateaeteeteeenened :
B.4.3 Motor tests N/A
B43.1 Motor blocked or rotor locked increasing the internal N/A
ambient temperature 22.0… ee eeeeseseeseeeseeeeeeseeeeeteeeees :
B.4.4 Short circuit of functional insulation See below P
B.4.4.1 Short circuit of clearances for functional insulation The functional insulation was short- P
circuited. See appended table B.4
B.4.4.2 Short circuit of creepage distances for functional The functional insulation was short- P
insulation circuited. See appended table B.4
B44.3 Short circuit of functional insulation on coated printed N/A
boards
B45 Short circuit and interruption of electrodes in tubes and N/A
semiconductors
B46 Short circuit or disconnect of passive components P
BA7 Continuous operation of components See appended table B.4 N/A
B.4.8 Class 1 and Class 2 energy sources within limits (See appended table B4) P
during and after single fault conditions During and after single fault
conditions, accessible parts does not
exceed the relevant energy class and
no flame and ignition inside the
equipment.
B49 Battery charging under single fault conditions ………. : |See Annex M P
C UV RADIATION N/A
Cl Protection of materials in equipment from UV No UV radiation N/A
radiation
C.1.2 Requirements N/A
C.1.3 Test method N/A
C2 UV light conditioning test N/A
C.2.1 Test apparatus N/A
C2.2 Mounting of test samples N/A

 

 

 

 

 

 

Report Number: R2010162-62368

Page 23 of 69

UL-CSA-62368 Second Edition Report

 

 

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
C.2.3 Carbon-arc light-exposure apparatus N/A
C24 Xenon-arc light exposure apparatus N/A
D TEST GENERATORS N/A
D.1 Impulse test generators N/A
D.2 Antenna interface test generator N/A
D.3 Electronic pulse generator N/A
E TEST CONDITIONS FOR EQUIPMENT CONTAINING AUDIO AMPLIFIERS P
E.1 Audio amplifier normal operating conditions Maximum available power, visible P

clipping cannot be established
The speaker is used for Sound
transmission, under test condition at
the Maximum available power
Audio signal voltage (V) ……cccceccescecceeceeeeeeteeteeeeteaes : {2.0V —
Rated load impedance (Q) ……ececceceeeeseeeeeteeeeeeeeeeees > 180 —=
E.2 Audio amplifier abnormal operating conditions See appended table B.3
EQUIPMENT MARKINGS, INSTRUCTIONS, AND INSTRUCTIONAL
SAFEGUARDS
Fl General requirements Equipment is provided with operating P
In Canada, there are two official languages, English instructions.
and French. The markings and instructions shall be in
English and French. Refer to Annex DVK for
acceptable French translations of the markings
specified
Instructions — Language …0…..eceeeeeeteeeeeeseeeee? | English and French —
F2 Letter symbols and graphical symbols Complied P
F.2.1 Letter symbols according to IEC60027-1 Complied P
F.2.2 Graphic symbols IEC, ISO or manufacturer specific Complied P
F3 Equipment markings P
F3.1 Equipment marking locations The label is placed on the bottom P
enclosure
F3.2 Equipment identification markings Refer below P
F3.2.1 Manufacturer identification 00.00… eeeeeeeeeetees : |See copy of marking plate —
F3.2.2 Model identification 20… cececeeeeeeeeeeeeeeeeeeeseeeees : |See copy of marking plate —
F3.3 Equipment rating markings See below P
F3.3.1 Equipment with direct connection to mains Not direct connection to mains N/A
F3.3.2 Equipment without direct connection to mains P
F.3.3.3 Nature of supply voltage… eee | Doe —
F3.3.4 Rated voltage .0..0…cceeeeeeeeeereeeeeeettttntetteeees [OV —
F.3.3.4 Rated frequency ………e cece cece eeteeeeeeeneeeeeneeeeee! =
F.3.3.6 Rated current or rated poWeP ..0…..eeeee? [LSA —

 

 

 

 

 

 

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
F3.3.7 Equipment with multiple supply connections N/A
F34 Voltage setting device No voltage setting device N/A
F3.5 Terminals and operating devices N/A
F3.5.1 Mains appliance outlet and socket-outlet markings… : N/A
F3.5.2 Switch position identification marking «0.00.0… : N/A
F3.5.3 Replacement fuse identification and rating markings : N/A
F3.5.4 Replacement battery identification marking………….. : N/A
F3.5.5 Terminal marking location N/A
F.3.6 Equipment markings related to equipment Class III equipment N/A

classification
F3.6.1 Class I Equipment N/A
F3.6.1.1 Protective earthing conductor terminal N/A
F.3.6.1.2 Neutral conductor terminal N/A
F3.6.1.3 Protective bonding conductor terminals N/A
F.3.6.2 Class II equipment (IEC60417-5172) N/A
F3.6.2.1 Class II equipment with or without functional earth N/A
F3.6.2.2 Class II equipment with functional earth terminal N/A
marking
F3.7 Equipment IP rating marking 2.00.00… eeeeeeeeeeeee : |IPXO —
F3.8 External power supply output marking N/A
F.3.9 Durability, legibility and permanence of marking The markings on the equipment is P
durable and legible, and shall be easily
discernable under normal lighting
conditions
F3.10 Test for permanence of markings Rubbing the marking by hand for 15 s P
with piece of cloth soaked with water
and, at a different place for on a
second sample. For 15 s with a piece
of cloth soaked with petroleum spirit.
after this test, marking is legible and
cannot be easily possible to remove
marking and show no curling
F4 Instructions P
a) Equipment for use in locations where children not N/A
likely to be present – marking
b) Instructions given for installation or initial use P
c) Equipment intended to be fastened in place N/A
d) Equipment intended for use only in restricted access N/A
area
e) Audio equipment terminals classified as ES3 and N/A

 

other equipment with terminals marked in accordance
F.3.6.1

 

 

 

 

 

Report Number: R2010162-62368

Page 25 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
f) Protective earthing employed as safeguard N/A
g) Protective earthing conductor current exceeding ES 2 N/A
limits
h) Symbols used on equipment P
1) Permanently connected equipment not provided with N/A
all-pole mains switch
j) Replaceable components or modules providing N/A
safeguard function
F5 Instructional safeguards See below
Where “instructional safeguard” is referenced in the test | English and French instructions
report it specifies the required elements, location of specified in user manual
marking and/or instruction
G COMPONENTS N/A
G1 Switches N/A
G.L.1 General requirements No switches N/A
G.1.2 Ratings, endurance, spacing, maximum load N/A
G.2 Relays N/A
G.2.1 General requirements No relays N/A
G.2.2 Overload test N/A
G.2.3 Relay controlling connectors supply power N/A
G.2.4 Mains relay, modified as stated in G.2 N/A
G3 Protection Devices N/A
G.3.1 Thermal cut-offs No protection devices N/A
G.3.1.1a) Thermal cut-outs separately approved according to N/A
&b) IEC 60730 with conditions indicated in a) & b)
G.3.1.1¢) Thermal cut-outs tested as part of the equipment as N/A
indicated in c)
G.3.1.2 Thermal cut-off connections maintained and secure N/A
G.3.2 Thermal links N/A
G.3.2.1a) Thermal links separately tested with IEC 60691 N/A
G.3.2.1b) Thermal links tested as part of the equipment N/A
Aging hours (H)……ccecceccecceseseeceeseeeteceeeeeeeeeeeeeaeeee : —
Single Fault Condition …0..0.. cc ccccceceeceeeeeeeeseeteeeeeee : —
Test Voltage (V) and Insulation Resistance (Q)…….. : —
G.3.3 PTC Thermistors N/A
G.3.4 Overcurrent protection devices N/A
G.3.5 Safeguards components not mentioned in G.3.1 to G.3.5 N/A
G.3.5.1 Non-resettable devices suitably rated and marking N/A
provided

 

 

 

 

 

 

Report Number: R2010162-62368 Page 26 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
G.3.5.2 Single faults conditions 20.00… eececceseeceeteeeteeeeeeeee! N/A
G.4 Connectors N/A
GA.1 Spacings No connectors N/A
G4.2 Mains connector configuration 00.00.00… : N/A
GA4.3 Plug is shaped that insertion into mains socket-outlets N/A

or appliance coupler is unlikely
G5 Wound Components N/A
G.5.1 Wire insulation in wound components «0.0.0.0… No wound components N/A
G.5.1.2 a) Two wires in contact inside wound component, angle N/A
between 45° and 90°
G.5.1.2b) | Construction subject to routine testing N/A
G.5.2 Endurance test on wound components N/A
G.5.2.1 General test requirements N/A
G.5.2.2 Heat run test N/A
Time (S) ..c.eeeceecsesssessescssessseesseecseecseeeseceeecesesesseesseensees : —
Temperature (°C) oo… ccccccececcescceeceeeeeeeeeeeeteeteeseateaeeaes : —
G.5.2.3 Wound Components supplied by mains N/A
G.5.3 Transformers N/A
G.5.3.1 Requirements applied (IEC61204-7, IEC61558-1/-2, | No transformers N/A
and/or TEC62368-1)……..cccccsccscessseeseceesceseeeseeenseeesees :
POSUHON eee cece cece cece ceeeeeeececeaeeeceneaeeeseneaeeeseneaeeeees : —
Method of protection 2.0… ccececeeeeeeeeeeeeeeeeeeeeeeeees : —
G.5.3.2 Insulation N/A
Protection from displacement of windings ……..0.0.001 —
G.5.3.3 Overload test…..e.cccecececcceecesscseeessceceeseceeeeeseetseeaeeneteeee : N/A
G.5.3.3.1 Test conditions N/A
G.5.3.3.2 | Winding Temperatures testing in the unit N/A
G.5.3.3.3 | Winding Temperatures – Alternative test method N/A
G.5.4 Motors N/A
G.5.4.1 General requirements No motors N/A
POSUHION eee ee cece ee ceeeeeeeceseaeeeceseaeeeseseaeeeseneaeeeees : —
G.5.4.2 Test conditions N/A
G.5.4.3 Running overload test N/A
G.5.4.4 Locked-rotor overload test N/A
Test duration (days) ……..cceceeceeeeeeeeeeseeeeeeseeerees : —
G.5.4.5 Running overload test for d.c. motors in secondary N/A
circuits
G.5.4.5.2 Tested in the unit N/A

 

 

 

 

 

 

Report Number: R2010162-62368 Page 27 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
Electric strength test (V) 0… ceeeeeeeeeeees : —
G.5.4.5.3 Tested on the Bench – Alternative test method; test N/A
time (1) oe eee ceecseecseecseeesseesseesseeeseeeseceseseseeesseeesees :
Electric strength test (V)…….cccecceceeeeeeeeeeeeeeeeeeeeeeees : —
G.5.4.6 Locked-rotor overload test for d.c. motors in secondary N/A
circuits
G.5.4.6.2 Tested in the unit N/A
Maximum Temperature 2.0.0.0 cccccceeeeeeeeeeeeeeeteeeees : N/A
Electric strength test (V) …..ccccecceceeeeeseeeeeeeeeteeseeeees : N/A
G.5.4.6.3 Tested on the bench – Alternative test method; test N/A
time (1) ooo eee ce ccecseecseecseeesseesseesseesseeeseceseseseeenseeesees :
Electric strength test (V)…….cccecceceeeeeeeeeeeeeeeeeeeeeeees : N/A
G.5.4.7 Motors with capacitors N/A
G.5.4.8 Three-phase motors N/A
G.5.4.9 Series motors N/A
Operating voltage 0… cece cece eeeeeeeeeeeeeeerees : —
G.6 Wire Insulation N/A
G.6.1 General N/A
G.6.2 Solvent-based enamel wiring insulation N/A
G.7 Mains supply cords N/A
G.7.1 General requirements No such components. N/A
TYPO. eee ce cece cee ceeceeceee cee cnecneeneceeeeeeeeeeseeseaneaeeaeed —
Rated current (A) oo… cece ceesceeecesseesseeesseeteeeneeee! —
Cross-sectional area (mm), (AWG)……..0cccccceeeeeee : —
G.7.2 Compliance and test method N/A
G.7.3 Cord anchorages and strain relief for non-detachable N/A
power supply cords
G.7.3.2 Cord strain relief N/A
G.7.3.2.1 Requirements N/A
Strain relief test force (N) ……..ccccccccccesceeeeeeeeeeeeeeses : —
G.7.3.2.2 Strain relief mechanism failure N/A
G.7.3.2.3 Cord sheath or jacket position, distance (mm) ……….. : —
G.7.3.2.4 Strain relief comprised of polymeric material N/A
G.7.4 Cord Entry oe. cee cseeeceseeeeeceseaeeeseeeeeseseaeeees : N/A
G.7.5 Non-detachable cord bend protection N/A
G.7.5.1 Requirements N/A
G.7.5.2 MaS (2) ..ecceeeseeeseessececeeeseceseeeeeeceeeeeseeeaeecaeeeaeeeaeeeneeeaas : —
Diameter (M1) ………c.ccccccecseceseeesceseeeecessceseseneeenseeesees : —
Report Number: R2010162-62368 Page 28 of 69 UL-CSA-62368 Second Edition Report

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict

Temperature (°C) oo… ccccccececcescceeceeeeeeeeeeeeteeteeseateaeeaes : —
G.7.6 Supply wiring space N/A
G.7.6.2 Stranded wire N/A
G.7.6.2.1 Test with 8 mm strand N/A
G8 Varistors N/A
G.8.1 General requirements No varistors N/A
G.8.2 Safeguard against shock N/A
G.8.3 Safeguard against fire N/A
G.8.3.2 Varistor Overload test……..csccceccceeceeeeeeseeeeeeeteteseeteeeeee! N/A
G.8.3.3 Temporary Overvoltage………ceccecccceesseceeeseeseteeeeteeeeeee! N/A
G9 Integrated Circuit (IC) Current Limiters N/A
G.9.1 a) Manufacturer defines limit at max. SA. N/A
G.9.1 b) Limiters do not have manual operator or reset N/A
G.9.1 c) Supply source does not exceed 250 VA wwe : —
G.9.1 d) IC limiter output current (max. 5A)… eee : —
G.9.1 e) Manufacturers’ defined drift ……0…. cece eects : —
G92 Test Program 1 N/A
G.9.3 Test Program 2 N/A
G94 Test Program 3 N/A
G.10 Resistors N/A
G.10.1 General requirements No Resistors N/A
G.10.2 Resistor test N/A
G.10.3 Test for resistors serving as safeguards between the

mains and an external circuit consisting of a coaxial N/A

cable
G.10.3.1 General requirements N/A
G.10.3.2 Voltage surge test N/A
G.10.3.3 Impulse test N/A
G.11 Capacitor and RC units N/A
G.1L.1 General requirements No Capacitor and RC units N/A
G.11.2 Conditioning of capacitors and RC units N/A
G.11.3 Rules for selecting capacitors N/A
G.12 Optocouplers N/A

Optocouplers comply with IEC 60747-5-5:2007 No Optocouplers

Spacing or Electric Strength Test (specify option and N/A

test TESUIES) oo… eee cect ceceeececeeeeeeeeeeeeecaeeeeeeeeeseeeeeseel

Type test voltage Vimi…. ieee eeseeeeeeneeeeee : —

Routine test voltage, Vimi,b 00.0… cccececeeeeeeeeeteeeeeees : —

 

 

 

Report Number: R2010162-62368 Page 29 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJinHuaLai TechnologyCo.,Ltd.

Model: WVOD1

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
G.13 Printed boards N/A
G.13.1 General requirements N/A
G.13.2 Uncoated printed boards N/A
G.13.3 Coated printed boards N/A
G.13.4 Insulation between conductors on the same inner N/A

surface
Compliance with cemented joint requirements __
(Specify construction)… eee eee eseesceeeteeeneetees :
G.13.5 Insulation between conductors on different surfaces N/A
Distance through insulation ….0…..ccceceeeeseeseeteeteneeee! N/A
Number of insulation layers (pcs)………..:eeeeeees : —
G.13.6 Tests on coated printed boards N/A
G.13.6.1 Sample preparation and preliminary inspection N/A
G.13.6.2a) | Thermal conditioning N/A
G.13.6.2b) | Electric strength test N/A
G.13.6.2c) | Abrasion resistance test N/A
G.14 Coating on components terminals N/A
G.14.1 Requirement ……..ceeeeeeeeeereeeeettesttesettessssseseeeeee | No Coating on components terminals N/A
G.15 Liquid filled components N/A
G.15.1 General requirements No Liquid filled components N/A
G.15.2 Requirements N/A
G.15.3 Compliance and test methods N/A
G.15.3.1 Hydrostatic pressure test N/A
G.15.3.2 Creep resistance test N/A
G.15.3.3 Tubing and fittings compatibility test N/A
G.15.3.4 Vibration test N/A
G.15.3.5 Thermal cycling test N/A
G.15.3.6 Force test N/A
G.15.4 Compliance N/A
G.16 IC including capacitor discharge function (ICX) N/A
a) Humidity treatment in accordance with sc5.4.8 —120 |No IC including capacitor discharge N/A
hours function (ICX)
b) Impulse test using circuit 2 with Uc = to transient N/A
VONAGE oes eeeeeccceeccesceeeaeecseeeceecaeeeaeeeeeeeeeseeeeeeeeeaeenaees :
Cl) Application of ac voltage at 110% of rated voltage for N/A
2.5 minutes
C2) Test Voltage oo. eeccecsceecceeseeeeeeseeeeeeeeeeeeseeeeeeeeeeeeeeeenaees : —

 

 

 

 

 

 

Report Number: R2010162-62368 Page 30 of 69

UL-CSA-62368 Second Edition Report

 

 

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict

D1) 10,000 cycles on and off using capacitor with smallest

capacitance resistor with largest resistance specified by N/A

manufacturer
D2) Capacitance oo… ceceseneceeeeeeseseaeeeseseeeeeseseaeerees : —
D3) Resistance oo… eee cece ceeeceeeeceeeeeceseaeeeseseaeeeseseaeerees : —
H CRITERIA FOR TELEPHONE RINGING SIGNALS N/A
H.1 General No Telephone Ringing Signal N/A
H.2 Method A N/A
H.3 Method B N/A
H.3.1 Ringing signal N/A
H.3.1.1 Frequency (HZ) 0.0… eee eeeeeeeseeeeeeeeeenenenee! —
H.3.1.2 Voltage (V) ooeceececccccceeseeeseeeeeeeeeeeeeeeieeseeeeeeeseseseeeeeneee! —
H.3.1.3 Cadence; time (s) and voltage (V) …..ceeeeeeereee! —
H.3.1.4 Single fault current (MA): 0.0.0.0 eeccceeceeeeeteeeeeteeteeeee! —
H.3.2 Tripping device and monitoring voltage… N/A
H.3.2.1 Conditions for use of a tripping device or a monitoring

voltage complied with NIA
H.3.2.2 Tripping device N/A
H.3.2.3 Monitoring voltage (V)……cccccceceeceeeteeeeeeeeeteeeeeeeeeel —
J INSULATED WINDING WIRES FOR USE WITHOUT INTERLEAVED N/A

INSULATION

General requirements No insulated winding wired for use N/A

without interleaved insulation

K SAFETY INTERLOCKS N/A
K.1 General requirements No safety interlocks N/A
K.2 Components of safety interlock safeguard mechanism . N/A
K3 Inadvertent change of operating mode N/A
K4 Interlock safeguard override N/A
K.5 Fail-safe N/A

Compliance o….cececcecccecceccecceeeeeceeceeeeeeeeeeteeeaeeeeeeeeeeeael N/A
K.6 Mechanically operated safety interlocks N/A
K.6.1 Endurance requirement N/A
K.6.2 Compliance and Test method ..0…0 cece eeeeeeeeteeeee! N/A
K.7 Interlock circuit isolation N/A
K.7.1 Separation distance for contact gaps & interlock N/A

circuit elements (type and circuit location) 1.0.0.0…
K.7.2 Overload test, Current (A) …….cccccceccesecssecsteesteeeeee! N/A
K.7.3 Endurance test N/A

 

 

 

 

 

 

 

 

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
K.7.4 Electric strength test ….0..ccccccccceecceeceseeeeestesteneeeeeee! N/A
L DISCONNECT DEVICES N/A
L.1 General requirements Class IIT equipment N/A
L2 Permanently connected equipment N/A
L3 Parts that remain energized N/A
LA Single phase equipment N/A
L.5 Three-phase equipment N/A
L.6 Switches as disconnect devices N/A
L7 Plugs as disconnect devices N/A
L.8 Multiple power sources N/A
M EQUIPMENT CONTAINING BATTERIES AND THEIR PROTECTION CIRCUITS P
M.1 General requirements See below P
M.2 Safety of batteries and their cells See below P
M.2.1 Requirements See table 4.1.2 P
M.2.2 Compliance and test method (identify method) ……… : | See table 4.1.2 P
M3 Protection circuits See below P
M.3.1 Requirements See below P
M.3.2 Tests See below P

– Overcharging of a rechargeable battery See appended table M P
– Unintentional charging of a non-rechargeable battery | Rechargeable battery N/A
– Reverse charging of a rechargeable battery The construction of battery can’t be N/A
reverse charged
– Excessive discharging rate for any battery See appended table M
M.3.3 Compliance ……cecceccceccecesceseecceeceeeeeeeeeeeeaeeeeseeseeseeteaes : | After test, no hazards.
M4 Additional safeguards for equipment containing See appended table Annex M.4
secondary lithium battery
M44.1 General See appended table Annex M.4
M.4.2 Charging safeguards See appended table Annex M.4
M4.2.1 Charging operating limits See appended table Annex M.4 P
M.4.2.2a) Charging voltage, current and temperature ……….0.001 —
M4.2.2b) | Single faults in charging circuitry ..0..0… es! —
M4.3 Fire Enclosure V-0 plastic enclosure used P
M44 Endurance of equipment containing a secondary N/A
lithium battery
M4.4.2 Preparation N/A
M4.4.3 Drop and charge/discharge function tests N/A
Drop N/A

 

 

 

 

 

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
Charge N/A
Discharge N/A
M4.4.4 Charge-discharge cycle test N/A
M4.4.5 Result of charge-discharge cycle test N/A
M.5 Risk of burn due to short circuit during carrying N/A
M5.1 Requirement N/A
M.5.2 Compliance and Test Method (Test of P.2.3) N/A
M.6 Prevention of short circuits and protection from other P
effects of electric current
M.6.1 Short circuits P
M.6.1.1 General requirements See table 4.1.2 for details P
M.6.1.2 Test method to simulate an internal fault P
M.6.1.3 Compliance (Specify M.6.1.2 or alternative method) : P
M.6.2 Leakage current (MA) .0…ecceeecececceeeceeeeteeeceeeeeeeeeees : 10.05mA P
M.7 Risk of explosion from lead acid and NiCd batteries No lead acid and NiCd batteries N/A
M.7.1 Ventilation preventing explosive gas concentration N/A
M.7.2 Compliance and test method N/A
M8 Protection against internal ignition from external spark N/A
sources of lead acid batteries
M.8.1 General requirements N/A
M.8.2 Test method N/A
M8.2.1 General requirements N/A
M.8.2.2 Estimation of hypothetical volume Vz (m°/s)…………. : —
M.8.2.3 Correction factors 0.0… ce sees ceeeieereeesieeteeeennees : —
M.8.2.4 Calculation of distance d (mM) …………ccceeeeeeeeeee : —
M9 Preventing electrolyte spillage
M.9.1 Protection from electrolyte spillage
M.9.2 Tray for preventing electrolyte spillage Not stationary equipment N/A
M.10 Instructions to prevent reasonably foreseeable misuse | English and French instructions P
(Determination of compliance: inspection, data specified in user manual
review; or abnormal testing) 0.0.0… eeeseseeereeeeeees :
N ELECTROCHEMICAL POTENTIALS N/A
Metal(s) Used oo… cc cceeceececeeceeceeceaeceeeeeeeeeeeeseeneeeeess : | Class IIT equipment —
0 MEASUREMENT OF CREEPAGE DISTANCES AND CLEARANCES N/A
Figures O.1 to O.20 of this Annex applied… : | Class II equipment, only ES1 circuits —
P SAFEGUARDS AGAINST ENTRY OF FOREIGN OBJECTS AND SPILLAGE OF N/A
INTERNAL LIQUIDS
P.1 General requirements No openings. N/A

 

 

 

 

 

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
P.2.2 Safeguards against entry of foreign object N/A
Location and Dimensions (mM) …………..:.c:ccseeeees : —
P.2.3 Safeguard against the consequences of entry of foreign N/A
object
P.2.3.1 Safeguards against the entry of a foreign object N/A
Openings in transportable equipment N/A
Transportable equipment with metalized plastic parts : N/A
P.2.3.2 Openings in transportable equipment in relation to N/A
metallized parts of a barrier or enclosure
(identification of supplementary safeguard) ………….. :
P.3 Safeguards against spillage of internal liquids N/A
P.3.1 General requirements N/A
P.3.2 Determination of spillage consequences N/A
P.3.3 Spillage safeguards N/A
P.3.4 Safeguards effectiveness N/A
P.4 Metallized coatings and adhesive securing parts N/A
P.4.2 a) Conditioning testing N/A
Te (COC). eececccecceccceecceeseeeececeaeeeseeeeceeaaeeeeaeessecueeesteeeeees : —
Tr (CO) cieecccccceccccceeceeeceeeeceeeaeeeseeeeseaaeeeeeeeesecueeeseeeeees : —
Ta (CC) occ ccccccecccccceccceeeseeececaaeeeseeeeeeeaaeeeeseeeseceeesneeeeees : —
P.4.2 b) Abrasion testing 2.0… cceccecceeeccseceeceeeeeeeeaeeeeneeesenaeeas : N/A
P.4.2 c) Mechanical strength testing 2.0.0.0… ceeeeeeeeeeeeeeteees : N/A
Q CIRCUITS INTENDED FOR INTERCONNECTION WITH BUILDING WIRING N/A
Q.1 Limited power sources N/A
Q.1.1 a) Inherently limited output N/A
Q.1.1 b) Impedance limited output N/A
– Regulating network limited output under normal N/A
operating and simulated single fault condition
Q.1.1 ¢) Overcurrent protective device limited output N/A
Q.1.1 d) IC current limiter complying with G.9 N/A
Q.1.2 Compliance and test method N/A
Q.2 Test for external circuits — paired conductor cable N/A
Maximum output current (A)… eeeeeeeeeeeeteees : —
Current limiting method 2.0.0… eeeeeeeteeeteeeeeteaes : —
R LIMITED SHORT CIRCUIT TEST N/A
R.1 General requirements N/A
R.2 Determination of the overcurrent protective device and N/A

 

circuit

 

 

 

 

 

 

 

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
R.3 Test method Supply voltage (V) and short-circuit N/A
Current (A)). oo… eccccecceeeceeneeeeeeeeeseeeeseeeeesneeeseeeeess :
TESTS FOR RESISTANCE TO HEAT AND FIRE N/A
S.1 Flammability test for fire enclosures and fire barrier N/A
materials of equipment where the steady state power
does not exceed 4 000 W
Samples, material ………ccccccecceceeceeceeeeeeeeeeeeeeeeeeeeeeaeees : —
Wall thickness (MM) …………:ccccccceeseesseesteesteesteeseees : —
Conditioning (CC)… ccceccccecccceececeeeeeeeeeeaeeaeeeeeeeeeeees : —
Test flame according to IEC 60695-11-5 with N/A
conditions as set out
– Material not consumed completely N/A
– Material extinguishes within 30s N/A
– No burning of layer or wrapping tissue N/A
8.2 Flammability test for fire enclosure and fire barrier N/A
integrity
Samples, material ………ccccccecceceeceeceeeeeeeeeeeeeeeeeeeeeeaeees : —
Wall thickness (MM) …………:ccccccceeseesseesteesteesteeseees : —
Conditioning (CC)… ccceccccecccceececeeeeeeeeeeaeeaeeeeeeeeeeees : —
Test flame according to IEC 60695-11-5 with N/A
conditions as set out
Test specimen does not show any additional hole N/A
8.3 Flammability test for the bottom of a fire enclosure N/A
Samples, material ………ccccccecceceeceeceeeeeeeeeeeeeeeeeeeeeeaeees : —
Wall thickness (MM) …………:ccccccceeseesseesteesteesteeseees : —
Cheesecloth did not ignite N/A
S.4 Flammability classification of materials N/A
S.5 Flammability test for fire enclosures and fire barrier N/A
materials of equipment where the steady state power
does not exceed 4 000 W
Samples, material ………ccccccecceceeceeceeeeeeeeeeeeeeeeeeeeeeaeees : —
Wall thickness (MM) …………:.cccccceeseeseesteesteesteeeteees : —
Conditioning (test condition), (°C) 0.0… eee : —
Test flame according to IEC 60695-11-20 with N/A
conditions as set out
After every test specimen was not consumed N/A
completely
After fifth flame application, flame extinguished N/A

 

within 1 min

 

 

 

 

 

 

 

 

 

UL 62368-1, CAN/CSA-C22.2 No. 62368-1-14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
T MECHANICAL STRENGTH TESTS P
T.1 General requirements P
T.2 Steady force test, LON oo… eeeeeeeeneeee! N/A
T.3 Steady force test, 30 Noe. eeeeeeeeeenneeee! N/A
TA Steady force test, LOO N oo… eeeeeeeeeereeeeeee! N/A
TS Steady force test, 250 N oo. eesestsseeeet | (See appended table T.5)
T.6 Enclosure impact test (See appended table T.6)
Fall test
Swing test P
T.7 Dip test cece ccecececceseecececeseeeeeeceeeeeaeeeaeeeneeeneeneeenaee! N/A
T8 Stress relief test 0.0. eceeeeseeeeeteeeeettstteeeeeeet | (See appended table T.8) P
T.9 Impact Test (glass) No glass N/A
T.9.1 General requirements N/A
T.9.2 Impact test and compliance N/A
Impact energy (J)… eee ee eee cree cere eeceeeeeeceeneeeeeeeees : —
Height (1)… ccccceccececeseeeeeseeeeeeeaceeeesceecaeeenenseeeeeareesees : —
T.10 Glass fragmentation test 20.0… ceceeceeceeeeeeeeeneeseaeeeeees : | No glass N/A
T.1l Test for telescoping or rod antennas No telescoping or rod antennas N/A
Torque value (NM) .0…….cceecceeeeeeeececeeeeeeeeneeeneenteenaeel —
U MECHANICAL STRENGTH OF CATHODE RAY TUBES (CRT) AND PROTECTION N/A
AGAINST THE EFECTS OF IMPLOSION
Ul General requirements N/A
U.2 Compliance and test method for non-intrinsically N/A
protected CRTs
U3 Protective Screen… cece cee ceseeceeeeeceeceeaeeceeaeeceeaeees : N/A
Vv DETERMINATION OF ACCESSIBLE PARTS (FINGERS, PROBES AND WEDGES) N/A
V.1 Accessible parts of equipment N/A
V.2 Accessible part criterion N/A

 

 

 

 

 

 

TianJin HuaLai Technology Co.,Ltd.

Model: WVOD1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.1.2 TABLE: List of critical components P
Object / part Manufacturer/ Type / model Technical data Standard Mark(s) of
No. trademark conformity!
HENGDIAN
Plastic GROUP TOSPO V-0, 80°C
enclosure ENGINEERING C301-XX Min. thickness: 0.8mm UL 746 UL (E187910)
PLASTICS CO LTD
HUIZHOU
KINGSUM °
PCB ELECTRONICS CO KSE-M V-0, 130°C UL796 UL (E345887)
LTD
Alternate Interchangeable Interchangeable | Min. V-1, Min. 105°C UL796 UL
INTERTEK
Dongguan Golden Certif. No.: SG ITS-
Battery pack CEL Battery Co., 104049 7AV, 2600mAb, TEC 62133- 21483
19.24Wh 2:2017
Ltd. Report No.:
200701045SZN-001
SGS
Guangdong Pow- Certif. No.:
Alternate Tech New Power PT124147-28 Nw an , ; 3 FI-45901
Co., Ltd. : , Report No.:
SZES200700426801
DONGGUAN
: WENCHANG 28AWG, VW-1,
Internal wire ELECTRONIC CO 1571 105°C, 30V UL 758 UL (E214500)
LTD
Alternate DONGGUAN
ZHENGWEI °
ELECTRIC WIRE & 1571 “BAWG. woe 30V, UL 758 UL (E326510)
CABLE INDUSTRY
COLTD
Alternate Min. 28AWG. VW-1
in. , VW-l,
Interchangeable Interchangeable Min. 80°C, Min. 30V UL 758 UL
QinYang ;
HONGYUNSHENG | YDS1524W010- 8Q. + 15%, UL 62368-1 Test with
Speaker : &CSA C22.2 :
Electric Sound L35-1.0 1.0W, max. 1.2mW appliance
: No.62368-1
Equipment Co. Ltd.

 

 

 

 

Supplementary information:

) Description line content is optional. Main line description needs to clearly detail the component used for testing

 

 

 

Report Number: R2010162-62368

Page 37 of 69

UL-CSA-62368 Second Edition Report

 

 

 

4.8.4, 4.8.5

TABLE: Lithium coin/button cell batteries mechanical tests

N/A

 

 

(The following mechanical tests are conducted in the sequence noted.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.8.4.2 TABLE: Stress Relief test
Part Material Oven Temperature (°C) Comments
4.8.4.3 TABLE: Battery replacement test
Battery part MO… ceeceeeee cee cee ceeeeeceeeeeeseeseeseneaseaes : a
Battery Installation/withdrawal Battery Installation/Removal Cycle Comments
1
2
3
4
5
6
8
9
10
43.44 Table: DROP TEST
Impact Area Drop Distance Drop No. Observations
1
2
3
4.8.4.5 TABLE: Impact
Impacts per surface Surface tested Impact energy (Nm) Comments
4.8.4.6 TABLE: Crush test
Test position Surface tested Crushing Force (N) Duration force

applied (s)

 

 

 

 

 

 

 

Supplementary information:

 

 

 

 

 

 

 

4.3.5

 

TABLE: Lithium coin/button cell batteries mechanical test result

N/A

 

 

Test position

Surface tested

Force (N)

Duration force

applied (s)

 

 

 

 

 

 

Supplementary information: Li-ion battery pack used, not coin/button cell type battery

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.2 Table: Classification of electrical energy sources P
5.2.2.2 — Steady State Voltage and Current conditions
Suool Location (e.g. Parameters
No. Uppy circuit Test conditions U I ES Class
Voltage : :
designation) Hz
(Vrms or Vpk) (Apk or Arms)
Normal N/A N/A N/A
1 5Vde EUT input Abnormal N/A N/A N/A ESI
Single fault —
SC/OC N/A N/A N/A
Normal 8.28Vdc N/A N/A
Battery model Abnormal 8.28Vdc N/A N/A
2 TAVd ES1
© 104049output | Single fault SC:
B- to P- of battery 8.28Vdc N/A N/A
PCB
Normal 8.20Vdc N/A N/A
Battery model Abnormal 8.20Vdc N/A N/A
3 TAVd PT124147- ES1
© 2Soutput Single fault — SC:
P B- to P- of battery 8.20Vde N/A N/A
PCB
5.2.2.3 – Capacitance Limits
Suppl Location (e.g. Parameters
No. PP’Y circuit Test conditions ES Class
Voltage designation) Capacitance, nF Upk (V)
Normal N/A N/A
Abnormal
N/A N/A N/A NIA NIA N/A
Single fault —
sciOc N/A N/A
5.2.2.4 – Single Pulses
Suppl Location (e.g. Parameters
No. Valn y circuit Test conditions ; ES Class
ee designation) Duration (ms) Upk (V) Ipk (mA)
Normal N/A N/A
N/A N/A N/A N/A
Abnormal N/A N/A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Single fault —
SC/OC N/A N/A N/A
5.2.2.5 – Repetitive Pulses
Suppl Location (e.g. Parameters
No. V. ite y circuit Test conditions ; ES Class
omage designation) Off time (ms) Upk (V) Ipk (mA)
Normal N/A N/A N/A
N/A N/A N/A Abnormal N/A N/A N/A N/A
Single fault —
SC/OC N/A N/A N/A
Test Conditions:
Normal —
Abnormal –
Supplementary information: SC=Short Circuit, OC=Open Circuit
5.4.1.4, TABLE: Temperature measurements P
6.3.2, 9.0,
B.2.6
Supply voltage (V) ss charging mode 5Vdc Discharging mode 7.4Vdc —
Charging Charging Supplied by Supple d by
empty battery | empty battery | fully battery batte PTLD 4
104049 PT124147-28 104049 “y
147-28
Ambient Tinin (PC) oes 22.0 22.0 22.0 22.0 —
: Shift Shift Shift Shift
°,
Ambient Timax (°C) oe 23.1 to 40 23.1 to 40 22.3 to 40 22.3 to 40 —
Tima (°C) .o..eeceececsceeseeeeeeeeeeees 40.0 40.0 40.0 40.0 —
O°,
Maximum measured temperature T of part/at: ae : nee)
Ambient 23.1 | 40.0 | 23.1 | 40.0] 22.0 | 40.0] 22.0 | 40.0 —
PCB near U1 46.2 | 63.1 | 46.5 | 63.4] 42.5 | 60.5] 42.9 | 60.9 105
PCB near U2 43.6 | 60.5 | 43.7 | 60.6] 40.0 | 58.0] 40.2 | 58.2 105
PCB near power port 42.8 | 59.7 | 42.7 | 59.6] 364 | 544] 36.5 | 54.5 105
Internal plastic enclosure 40.2 | 57.1 | 40.1 | 57.0] 37.4 | 55.4] 37.6 | 55.6 80
Accessible part (Shift to 25°C) :
Ambient 23.1 | 25.0 | 23.1 | 25.0] 22.0 | 25.0] 22.0 | 25.0 —
Top plastic enclosure 32.2 | 34.1 | 324 | 34.3] 29.0 | 32.0] 29.3 | 32.3 77
Side plastic enclosurenear camera 34.8 | 36.7 | 34.9 | 36.8] 32.8 | 35.8] 33.3 | 36.3 77
a t CC) R; (Q) tz CC) Rz (Q) T(°C) | Allowed | Insulation
Temperature T of winding: Tnx (°C) class

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supplementary information:

1. Maximum normal load: The EUT was supplied by 5Vdc or 7.4Vdc and connected to mobile phone wirelessly, and
opened the camera to recording video.

2. The temperatures were measured under the worst case normal mode defined in clause B.2.1.
3. Tma: 40°C
Note 1: Tma should be considered as directed by appliable requirement

Note 2: Tma is not included in assessment of Touch Temperatures (Clause 9)

 

 

5.4.1.10.2 TABLE: Vicat softening temperature of thermoplastics N/A

 

 

 

Pemetration (MM) ……ccccescscccsccssecccsssessceccesssasscescnsacecccsssnnesed | C#tttttCeeeeeeeeseeaeeeeeneaeeeeeesseaeeeeeeeeeeceseeaaseeeeennaeaea —

 

Object/ Part No./Material Manufacturer/tr T softening (°C)
ademark

 

 

 

 

 

supplementary information:

 

 

 

 

 

 

5.4.1.10.3 | TABLE: Ball pressure test of thermoplastics N/A
Allowed impression diameter (MM) ……..:cccccceeeeeeeeeeeeeseeees :/<2mm —
Object/Part No./Material Manufacturer/trademark Test temperature (°C) Impression diameter (mm)

 

 

 

 

 

 

Supplementary information:

 

 

 

 

 

5.4.2.2, TABLE: Minimum Clearances/Creepage distance N/A
5.4.2.4 and

5.4.3

Clearance (cl) and creepage distance Up Urm-s. | Frequency | Required cl Required* cr
(cr) at/of/between: (V) (V) (kHz)! cl (mm) (mm) cr (mm) (mm)

 

 

 

 

 

 

 

 

 

 

 

Supplementary information:

Note 1: Only for frequency above 30 kHz
Note 2: See table 5.4.2.4 if this is based on electric strength test

Note 3: Provide Material Group

 

 

 

5.4.2.3 TABLE: Minimum Clearances distances using required withstand voltage N/A

Overvoltage Category (OV):

 

 

 

 

 

 

 

 

Pollution Degree:

 

 

Clearance distanced between:

Required withstand

Required cl

voltage

(mm)

Measured cl (mm)

 

 

 

 

 

 

 

Supplementary information:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.4.2.4 TABLE: Clearances based on electric strength test N/A
Test voltage applied between: Required cl Test voltage (kV) Breakdown
(mm) peak/r.m.s. / d.c. Yes / No

Supplementary information:

5.4.4.2, TABLE: Distance through insulation measurements N/A

5.4.4.5 c)

5.4.4.9

Distance through Peak voltage Frequency Material Required DTI DTI

insulation di at/of: (V) (kHz) (mm) (mm)

Supplementary information:

5.4.9 TABLE: Electric strength tests N/A

Test voltage applied between: Voltage shape Test voltage (V) Breakdown
(AC, DC) Yes / No

Functional:

Basic/supplementary:

Reinforced:

 

 

Routine Tests:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.4.9 TABLE: Electric strength tests N/A
Test voltage applied between: Voltage shape Test voltage (V) Breakdown
(AC, DC) Yes/No

Supplementary information:

5.5.2.2 TABLE: Stored discharge on capacitors N/A
Supply Voltage (V), Hz | Test Location] Operating Switch Measured Voltage ES Classification

Condition (N, position (after 2 seconds)
S) On or off

 

 

 

 

 

 

 

 

 

Supplementary information:

X-capacitors installed for testing are:

O bleeding resistor rating:

O ICX:
Notes:

A. Test Location:

Phase to Neutral; Phase to Phase; Phase to Earth; and/or Neutral to Earth

B. Operating condition abbreviations:

N — Normal operating condition (e.g., normal operation, or open fuse); S —Single fault condition

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5.6.6.2 TABLE: Resistance of protective conductors and terminations N/A

Accessible part Test current Duration Voltage drop Resistance
(A) (min) (V) (Q)

Supplementary information:

5.7.2.2, TABLE: Earthed accessible conductive part N/A

5.7.4

Supply voltage 2… cece eee cee cee eeeeeeeeee cae enecneeneeneeees : =

Location Test conditions specified in 6.1 of Touch current

IEC 60990 or Fault Condition No in
IEC 60990 clause 6.2.2.1 through
6.2.2.8, except for 6.2.2.7

(mA)

 

 

 

1

 

D*

 

 

3

 

 

 

 

 

 

 

 

 

 

 

Ol]lal nay] &

 

 

Supplementary Information:

Notes:

[1] Supply voltage is the anticipated maximum Touch Voltage

[2] Earthed neutral conductor [Voltage differences less than 1% or more]
[3] Specify method used for measurement as described in IEC 60990 sub-clause 4.3

[4] IEC60990, sub-clause 6.2.2.7, Fault 7 not applicable.

[5] (*) IEC60990, sub-clause 6.2.2.2 is not applicable if switch or disconnect device (e.g., appliance coupler) provided.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.2.2 Table: Electrical power sources (PS) measurements for classification P
oe Max Power after 3 s Max Power after 5 s*) PS
Source Description Measurement tee
Classification
Power (W) N/A N/A
EUT input
A (SVdc) Va (V) N/A N/A PSI
Ta (A) N/A N/A
Power (W) 60.4 59.2
Battery model
B 104049 output Va (V) 6.23 6.10 PS2
Ta (A) 9.7 9.7
Battery model Power (W) 110 106
104049output
Cc (B- to P- SC of Va(V) 5.0 4.82 PS3
battery PCB) Ta (A) 22 22
P WwW 49.0 :
Battery model ower (W) ? 48.0
D PT124147- Va (V) 6.13 6.0 PS2
2Soutput
onrpnt In (A) 8.0 8.0
Battery model | Power (W) 105 101
PT124147-
E 2Soutput (B- to | YAY) 5.0 481 PS3
P- SC of battery | I, (A)
PCB) 21 21
Supplementary Information:
(*) Measurement taken only when limits at 3 seconds exceed PS1 limits
6.2.3.1 Table: Determination of Potential Ignition Sources (Arcing PIS) N/A

 

 

 

 

 

 

 

 

 

Open circuit
voltage

After 3 s

Location (Vp)

Measured r.m.s
current

(Irms)

Calculated value
(Vp X Tims)

Arcing PIS?
Yes / No

 

 

 

 

 

 

Supplementary information:

An Arcing PIS requires a minimum of 50 V (peak) a.c. or d.c. An Arcing PIS is established when the product of the open
circuit voltage (V,) and normal operating condition rms current (Irms) is greater than 15.

 

 

 

 

 

 

 

 

6.2.3.2 Table: Determination of Potential Ignition Sources (Resistive PIS) P
: we Measured Measured Protective Circuit son
> Resist
ercuatecrienten) . Coes cone Sa 1 wattage or VA wattage or VA Regulator, or PTC IS >
MOU CANON CY ormey Fault) meine’ | During first 30s | After 30s (W/ Operated?
(W/VA) VA) Yes/No (Comment) | Yes/No
Battery 104049 Normal = 41.6 = Yes
output Single Fault- SC: B – to P- 110 50.2 — Yes
Battery PT124147-28 | Normal ~ 33.1 ~ Yes
output Single Fault- SC: B- to P- 105 45.2 — Yes

 

 

 

 

 

 

Supplementary Information: EUT input is PS3, exist Resistive PIS.

A combination of voltmeter, VA and ammeter IA may be used instead of a wattmeter.

If a separate voltmeter and ammeter are used, the product of (VA x IA) is used to determine Resistive PIS classification.

A Resistive PIS: (a) dissipates more than 15 W, measured after 30 s of normal operation, or (b) under single fault
conditions has either a power exceeding 100 W measured immediately after the introduction of the fault if electronic
circuits, regulators or PTC devices are used, or has an available power exceeding 15 W measured 30 s after introduction of

the fault.

 

 

8.5.5

 

TABLE: High Pressure Lamp

N/A

 

 

Description

Values

Energy Source Classification

 

 

 

Cat NO. eee ccce cece cesses seseeseeeseecaeceeceeeeaeesaeeeseeeseeeeeeaeeel

 

Pressure (Cold) (MP8)………..::0ccccecescsseseeseeeesseteneeel

MS_

 

Pressure (operating) (MPa) .0…….eceeeceeeeeeeeeteeeeeeeee!

MS_

 

Operating time (minutes)… eeeeeeeeeeeeeeeeeee!

 

Explosion method ……..cccccccccscececeecceeeeceeceeeeeseteeseee!

 

Max particle length escaping enclosure (mm)………:

MS_

 

Max particle length beyond 1 m (mm)…

 

MS_

 

Overall result: oo… cece cceccccee cee ceeceeceeeseeseeeeeeseeneeneel

 

 

 

Supplementary information:

 

 

 

 

 

 

 

B.2.5 TABLE: Input test P

 

 

 

U(V) I (A) I rated (A) P (W) P rated (W) Fuse No | I fuse (A) Condition/status

 

Charge mode with battery model 104049

 

1.42 1.5 — — — — Maximum Normal load

 

5.0Vdc

1.40 1.5 — — — — Maximum Normal load

 

Charge mode with battery model PT124147-2S

 

 

 

 

 

141 1.5 — — — — Maximum Normal load
5.0Vde
141 1.5 — — — — Maximum Normal load
Discharge mode:
7AVdc
supplied by 0.462 — — — — — Maximum Normal load
battery model
104049
7AVdc
supplied by 0.504 — — — — — Maximum Normal load

battery model
PT124147-2S

 

 

 

 

 

 

 

 

Supplementary information:

Maximum normal load: The EUT was supplied by 5Vdc or 7.4Vdc and connected to mobile phone wirelessly, and opened
the camera to recording video

 

 

 

 

 

 

 

 

B.3 TABLE: Abnormal operating condition tests P
Ambient temperature (CC) 0… cececcecceeceeccesceeeeeceeceeeeeeeeeeecaeeaeeaeeeeseaeeneeaneae! 20-25°C —
Power source for EUT: Manufacturer, model/type, output rating ………..: See marking. —
Component Abnormal Supply | Test Fuse Fuse T-couple | Temp. Observation
No. Condition | Voltage, | time no. current, (°C)
(V) (ms) (A)

 

 

Speaker voice shut down
Speaker SC 7AVdc | 30mins — – – – immediately, recoverable, no
hazard.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B.3

 

TABLE: Abnormal operating condition tests

 

Ambient temperature (°C)

20-25°C

 

Power source for EUT: Manufacturer, model/type, output rating

See marking.

 

 

 

Component

No.

 

 

 

Abnormal Supply Test
Condition | Voltage, | time
(V) (ms)

 

Fuse
no.

 

Fuse
current,
(A)

 

T-couple | Temp.

(°C)

 

 

Observation

 

Supplementary information:
Test table is provided to record abnormal and fault conditions for all applicable energy sources including Thermal burn

injury. Column “Abnormal/Fault.” Specify if test condition by indicating “Abnormal” then the condition for a Clause B.3
test or “Single Fault” then the condition for Clause B.4.

 

 

B.4

 

TABLE: Fault condition tests

 

Ambient temperature (CC) oo… ceccceccceceeeceseceeeeeeeaceaecaeeesesaessceaeneeteeseeseass :

20-25°C

 

Power source for EUT: Manufacturer, model/type, output rating ……….. :

See marking.

 

 

 

 

 

 

 

 

 

 

 

Component No. Fault Supply | Test | Fuseno.| Fuse T-couple | Temp. Observation
Condition | voltage, | time current, (°C)
(V) (ms) (A)
Battery model :
104049 | Overcharge | 5.0Vde | 7hrs | — — — -._ | Phe max. overcharging
current 0.750A, no hazards.
(P-to B- SC)
Battery model Over The max. over discharge
104049 discharge |7-4¥de | Thrs ~ ~ ~ ~ | current 0.471A, no hazards
(P-to B- SC) 8 Ns .
Battery model :
PT124147-2S | Overcharge } 5.0Vde | 7hrs – – – – The max oN eine ds
(P-to B- SC) , , ,
Battery model :
(P-to B- SC) 8 Es .
Unit shut down immediately,
C113 Sc 7AVde | 30min — — — — no molten metal dropped, no
fire occurred, no hazard.
Unit shut down immediately,
C150 Sc 7AVde | 30min — — — — no molten metal dropped, no
fire occurred, no hazard.
Unit shut down immediately,
C4 Sc 7AVde | 30min — — — — no molten metal dropped, no
fire occurred, no hazard.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supplementary information:

1) SC: Short-circuited; OC: Open-circuited; OL: Overloaded; BL: Blocked.

2) The test result shown all safeguards remained effective and didn’t lead to a single fault condition duringabnormal

operating condition; In addition all safeguards complied with applicable requirements in thisstandard after restoration of
normal operating conditions.
3) The worse condition is evaluated as above.
NHT: No High Temperature; NCD: No Component Damage; NFG: no flammability gas; S-C Short circuit.

 

 

Annex M

 

TABLE: Batteries

 

The tests of Annex M are applicable only when appropriate battery data is not available

 

 

Is it possible to install the battery in a reverse polarity position? ……..0.. eects : | No

 

N/A

 

Non-rechargeable batteries

Rechargeable batteries

 

Discharging

 

Meas.

current Specs.

Manuf.

Un-
intentional
charging

Charging

Discharging

Reversed charging

 

Meas.
current

Manuf.
Specs.

Meas.
current

Manuf.
Specs.

Meas.
current

Manuf.
Specs.

 

Max. current
during normal
condition
(Battery model:
104049)

0.739 2.6

0.462 2.6

 

Max. current
during fault
conditionshort-
circuitPin(B-,P-
) in the battery
protect circuit

0.750 2.6

0.471 2.6

 

Max. current
during normal
condition
(Battery model:
PT124147-2S)

0.778 1.3

0.504 1.3

 

Max. current
during fault
condition short-
circuit Pin(B-,P-
) in the battery
protect circuit

 

 

 

 

0.790 1.3

 

0.514 1.3

 

 

 

 

 

 

Test results:

 

Verdict

 

– Chemical leaks

No chemical leaks affecting required P
insulation.

 

– Explosion of the battery

No explosion.

P

 

– Emission of flame or expulsion of molten metal

No emission of flame or expulsion of P
molten metal.

 

– Electric strength tests of equipment after completion of tests

 

N/A

 

 

 

Supplementary information:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Annex M.4 |Table: Additional safeguards for equipment containing secondary lithium batteries P
Battery/Cell Measurements
. Test conditions Observation
°- U(V) I(A) Temp (°C)
Normal 8.28 0.739 56.8 No hazards
Battery model:
104049 Single fault — B- to P- short 8.28 0.750 577 No hazards
circuit of battery PCB , , ,
Battery model: Normal 8.20 0.778 574 No hazards
PT124147-28 ,
Single fault — B- to P- short 8.20 0.790 585 No hazards
circuit of battery PCB , , ,
Supplementary Information:
N/A
Battery Charging at Thowest Observation Charging at Thighest Observation
identification (°C) (°C)
Battery 0 The battery charge current 40.0 The battery temperature was
model:104049 less than the value specified 56.8°C, not exceeds the highest
by the battery manufacturer. manufacturer specified battery
charging temperature, no fire, no
hazards.

Battery 0 The battery charge current 40.0 The battery temperature was
model:104049 less than the value specified 57.7°C, not exceeds the highest
(P-to B- SC) by the battery manufacturer. manufacturer specified battery

charging temperature, no fire, no
hazards.
Battery 0 The battery charge current 40.0 The battery temperature was
model:PT 124147- less than the value specified 574°C, not exceeds the highest
28 by the battery manufacturer. manufacturer specified battery
charging temperature, no fire, no
hazards.
Battery 0 The battery charge current 40.0 The battery temperature was
model:PT 124147- less than the value specified 58.5°C, not exceeds the highest
28 by the battery manufacturer. manufacturer specified battery
(P-to B- SC) charging temperature, no fire, no
hazards.

 

 

 

 

 

 

Supplementary Information: The safety temperature of battery body: 60°C Max. specified in battery specification

 

 

Annex Q.1

TABLE: Circuits intended for interconnection with building wiring (LPS)

N/A

 

 

Note: Measured UOC (V) with all load circuits disconnected:

 

Output
Circuit

Components

Voc (V)

Tso(A)

 

Meas.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supplementary Information:
SC=Short circuit, OC=Open circuit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

T.2, T.3, T.4, | TABLE: Steady force test P
T.5
Part/Location Material | Thickness (mm) Force Test Duration Observation
(N) (sec)
Plastic enclosure(top) Plastic 0.8mm Min. 250 5 After test, no hazards
Plastic enclosure(side) Plastic 0.8mm Min. 250 5 After test, no hazards
Plastic enclosure(bottom) Plastic 0.8mm Min. 250 5 After test, no hazards
Supplementary information:
T.6, T.9 TABLE: Impact tests P
Part/Location Material Thickness (mm) | Vertical distance Observation
(mm)
Horizontal Plastic 0.8mm Min. 1300 After test, no hazards
Vertical Plastic 0.8mm Min. 1300 After test, no hazards
Supplementary information:
T.7 TABLE: Drop tests N/A
Part/Location Material | Thickness(mm) | Drop Height (mm) Observation
Supplementary information:
N/A
T.8 TABLE: Stress relief test P
Part/Location Material Thickness (mm) Oven Duration Observation
Temperature (h)
(°C)
Plastic enclosure Plastic 0.8mm Min. 70 7 No risk of shrinkage or
distortion on material, no
hazards.

 

Supplementary information:
N/A

 

 

 

 

 

 

TianJin HuaLai Technology Co.,Ltd.

Model: WVOD1

 

Test Equipment List and Details

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manufacturer Description Model No. Se Calibration Date Se
No. Due Date
High power LED
Shenzhen aging de power B12005 90024 2020-03-13 2021-03-12
BACL
supply

Yuhuaze hygrothermograph HTC-1 T-08-QA073 2020-03-07 2021-03-07
Agilent Data Acquisition 34970A N/A 2019-11-07 2020-11-06
TEKPOWER | DC Electronic Load 3710A A06AI03094 2019-11-05 2020-11-04
Huibo Stop Watch PC396 T-08-SF086 2020-03-07 2021-03-07
Fluke Digital Multimeter 15B 17961914 2019-11-05 2020-11-04
2019-07-23 2020-07-22

Shandu Push-pull Scale SN-300 2707 102032
2020-07-23 2021-07-22
_ _ 2019-09-24 2020-09-23

hengzhizhan Electron Balance He ALC 11003875
+count 2020-09-24 2021-09-23
UPM Digital caliper 0~150mm 63040 2020-03-13 2021-03-12
TAJIMA Steel tape HILOCK-19 T-08-SF100 2018-06-15 2023-06-14
Constant
BACL temperature and BTH-1000-70 30088 2020-04-22 2021-04-22
humidity chamber

HANYANG Steel ball FZ-1112A 1108045 2018-03-16 2021-03-15

 

 

 

 

 

 

 

Statement of Traceability: BACL Corp. attests that all calibrations have been performed according to A2LA
requirements, traceable to international system of units (SI) and National Institute of Metrology China (NIM).

 

Report Number: R2010162-62368

Page 51 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

 

List of Attachments
Amendment 1- US and Canadian National Differences

 

 

ATTACHMENT TO TEST REPORT IEC 62368-1 2” Ed.
U.S.A. NATIONAL DIFFERENCES
Audio/video, information and communication technology equipment — Part 1: Safety requirements

 

 

 

Differences according to ………………- : CSA/UL 62368-1:2014
Attachment Form No…. US&CA_ND_IEC623681B
Attachment Originator. UL(US)

Master Attachment ……0.00.00. : Date 2015-06

 

 

Copyright © 2015 TEC System for Conformity Testing and Certification of Electrical Equipment (IECEE),
Geneva, Switzerland. All rights reserved.

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict

 

 

TEC 62368-1 – US and Canadian National Differences
Special National Conditions based on Regulations and Other National Differences

 

Ll All equipment is to be designed to allow installation P
according to the National Electrical Code (NEC),
ANSI/NFPA 70, the Canadian Electrical Code
(CEC), Part I, CAN/CSA C22.1, and when
applicable, the National Electrical Safety Code, IEEE
C2.

Also, for such equipment marked or otherwise
identified, installation is allowed per the Standard for
the Protection of Information Technology
Equipment, ANSI/NFPA 75.

 

 

14 Additional requirements apply to some forms of The EUT is not used as N/A
power distribution equipment, including sub- distribution equipment.
assemblies.

4.1.17 For lengths exceeding 3.05 m, external Class III equipment. N/A

interconnecting flexible cord and cable assemblies
are required to be a suitable cable type (e.g., DP,
CL2) specified in the NEC.

 

For lengths 3.05 m or less, external interconnecting | Class III equipment. N/A
flexible cord and cable assemblies that are not types
specified in the NEC generally are required to have
special construction features and identification
markings.

 

48 Lithium coin / button cell batteries have modified No Lithium coin or button cell. N/A
special construction and performance requirements.

 

5.6.3 Protective earthing conductors comply with the Class IIL equipment. N/A
minimum conductor sizes in Table G.5, except as
required by Table G.7ADV.1 for cord connected
equipment, or Annex DVH for permanently
connected equipment

 

5.7.7 Equipment intended to receive telecommunication No such equipment. N/A
ringing signals complies with a special touch current
measurement tests.

 

 

 

 

 

 

 

Report Number: R2010162-62368 Page 52 of 69 UL-CSA-62368 Second Edition Report

 

TianJin HuaLai Technology Co.,Ltd.

Model: WVOD1

 

 

Clause

Requirement + Test

Result – Remark

Verdict

 

 

6.5.1

PS3 wiring outside a fire enclosure complies with
single fault testing in B.4, or be current limited per
one of the permitted methods.

No wiring outside a fire enclosure.

N/A

 

Annex F
(F.3.3.8)

Output terminals provided for supply of other
equipment, except mains, supply are marked with a
maximum rating or references to which equipment it
is permitted to be connected.

No output terminals

N/A

 

Annex G
(G.7.1)

Permanent connection of equipment to the mains
supply by a power supply cord is not permitted,
except for certain equipment, such as ATMs.

Class III equipment.

N/A

 

Annex G
(G.7.3)

Power supply cords are required to have attachment
plugs rated not less than 125 percent of the rated
current of the equipment.

Class III equipment.

N/A

 

Flexible power supply cords are required to be
compatible with Article 400 of the NEC, and Tables
11 and 12 of the CEC.

Class III equipment.

N/A

 

Annex G
(G.7.5)

Minimum cord length is required to be 1.5 m, with
certain constructions such as external power supplies
allowed to consider both input and output cord
lengths into the requirement. Power supply cords are
required to be no longer than 4.5 m in length if used
in ITE Rooms.

Class III equipment.

N/A

 

Annex H.2

Continuous ringing signals under normal operating
conditions up to 16 mA only are permitted if the
equipment is subjected to special installation and
performance restrictions.

Not such equipment.

N/A

 

Annex H.4

For circuits with other than ringing signals and with
voltages exceeding 42.4 Vpeax or 60 V d.c., the
maximum acceptable current through a 2000 ohm
resistor (or greater) connected across the voltage
source with other loads disconnected is 7.1 mA peak
or 30 mA d.c. under normal operating conditions.

N/A

 

Annex M

Battery packs for stationary applications comply with
special component requirements.

N/A

 

Annex DVA
(1)

Equipment intended for use in spaces used for
environmental air are subjected to special
flammability requirements for heat and visible smoke
release.

N/A

 

For ITE room applications, automated information
storage systems with combustible media greater than
0.76 m? (27 cu ft) have a provision for connection of
either automatic sprinklers or a gaseous agent
extinguishing system with an extended discharge.

N/A

 

 

 

Consumer products designed or intended primarily
for children 12 years of age or younger are subject to
additional requirements in accordance with U.S. &
Canadian Regulations.

 

 

N/A

 

 

 

Report Number:

R2010162-62368 Page 53 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd.

Model: WVOD1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict

Baby monitors additionally comply with ASTM N/A

F2951, Consumer Safety Specification for Baby

Monitors.
Annex DVA |For Pluggable Equipment Type A, the protectionin | Class III equipment. N/A
(5.6.3) the installation is assumed to be 20A.
Annex DVA | The maximum quantity of flammable liquid stored in N/A
(6.3) equipment complies with NFPA 30.
Annex DVA__ |For ITE room applications, enclosures with N/A
(6.4.8) combustible material measuring greater than 0.9 m?

(10 sqft) or a single dimension greater than 1.8m (6

ft) have a flame spread rating of 50 or less. For

equipment with the same dimensions for other

applications, an external surface that is not a fire

enclosure requires a min. flammability classification

of V-1.
Annex DVA _ |Equipment with lasers meets the U.S. Code of N/A
(10.3.1) Federal Regulations 21 CFR 1040 (and the Canadian

Radiation Emitting Devices Act, REDR C1370).
Annex DVA _ |Equipment that produces ionizing radiation complies N/A
(10.5.1) with the U.S. Code of Federal Regulations, 21 CFR

1020 (and the Canadian Radiation Emitting Devices

Act, REDR C1370).
Annex DVA | Equipment for use on a.c. mains supply systems with | Class III equipment. N/A
(F.3.3.3) a neutral and more than one phase conductor (e.g.

120/240 V, 3-wire) require a special marking format

for electrical ratings. Additional considerations

apply for voltage ratings that exceed the attachment

cap rating or are lower than the “Normal Operating

Condition” in Table 2 of CAN/CSA C22.2 No. 235.”
Annex DVA _ |Equipment identified for ITE (computer) room N/A
(F.3.3.5) installation is marked with the rated current
Annex DVA | Vertically-mounted disconnect switches and circuit N/A
(G.1) breakers have the “on” position indicated by the

handle in the up position
Annex DVA | Suitable NEC/CEC branch circuit protection rated at | No outlet. N/A
(G.3.4) the maximum circuit rating is required for all

standard supply outlets and receptacles (such as

supplied in power distribution units) if the supply

branch circuit protection is not suitable.
Annex DVA _ |Equipment with isolated ground (earthing) Class III equipment. N/A
(G.4.2) receptacles complies with NEC 250.146(D) and CEC

10-112 and 10-906(8).
Annex DVA _ | Where a fuse is used to provide Class 2 or Class 3 N/A
(G.4.3) current limiting, it is not operator-accessible unless it

is non- interchangeable.
Annex DVA _ | Power distribution transformers distributing power at N/A
(G.5.3) 100 volts or more, and rated 10 kVA or more, require

special transformer overcurrent protection.

 

 

 

 

 

 

Report Number: R2010162-62368 Page 54 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd.

Model: WVOD1

 

Clause

Requirement + Test

Result – Remark

Verdict

 

 

Annex DVA
(G.5.4)

Motor control devices are required for cord-
connected equipment with a mains-connected motor
if the equipment is rated more than 12 A, or if the
equipment has a nominal voltage rating greater than
120 V, or if the motor is rated more than 1/3 hp
(locked rotor current over 43 A).

N/A

 

Annex DVA
(Annex M)

For ITE room applications, equipment with battery
systems capable of supplying 750 VA for five
minutes have a battery disconnect means that may be
connected to the ITE room remote power-off circuit.

N/A

 

Annex DVA
(Q)

Wiring terminals intended to supply Class 2 outputs
according to the NEC or CEC Part lare marked with
the voltage rating and “Class 2” or equivalent;
marking is located adjacent to the terminals and
visible during wiring.

N/A

 

Annex DVB
(1)

Additional requirements apply for equipment used
for entertainment purposes intended for installation
in general patient care areas of health care facilities.

N/A

 

Annex DVC
(1)

Additional requirements apply for equipment
intended for mounting under kitchen cabinets.

N/A

 

Annex DVE
(4.1.1)

Some equipment, components, sub-assemblies and
materials associated with the risk of fire, electric
shock, or personal injury have component or material
ratings in accordance with the applicable national
(U.S. and Canadian) component or material
requirements.

Components required to comply include:

appliance couplers, attachment plugs, battery back-
up systems, battery packs, circuit breakers,
communication circuit accessories, connectors (used
for current interruption of non-LPS circuits), power
supply cords, direct plug-in equipment,
electrochemical capacitor modules (energy storage
modules with ultra-capacitors), enclosures (outdoor),
flexible cords and cables, fuses (branch circuit),
ground-fault current interrupters, interconnecting
cables, data storage equipment, printed wiring,
protectors for communications circuits, receptacles,
surge protective devices, vehicle battery adapters,
wire connectors, and wire and cables.

 

Annex DVH

Equipment for permanent connection to the mains
supply is subjected to additional requirements.

N/A

 

Annex DVH
(DVH.1)

Wiring methods (terminals, leads, etc.) used for the
connection of the equipment to the mains are in
accordance with the NEC/CEC.

N/A

 

 

Annex DVH
(DVH.3.2)

 

Terminals for permanent wiring, including protective
earthing terminals, are suitable for U.S./Canadian
wire gauge sizes, rated 125 percent of the equipment
rating, and are specially marked when specified.

 

 

N/A

 

 

 

Report Number: R2010162-62368 Page 55 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd.

Model: WVOD1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clause Requirement + Test Result – Remark Verdict
Annex DVH _ | Wire binding screws are not permitted to attach N/A
(DVH.3.2) conductors larger than 10 AWG (5.3 mm”).
Annex DVH _ | Permanently connected equipment is required to N/A
(DVH.4) have a suitable wiring compartment and wire

bending space.
Annex DVH _ | Equipment connected to a centralized d.c. power N/A
(DVH 5.5) system, and having one pole of the DC mains input

terminal connected to the main protective earthing

terminal in the equipment, complies with special

earthing, wiring, marking and installation instruction

requirements.
Annex DVI Equipment intended for connection to N/A
(6.7 ) telecommunication network outside plant cable is

required to be protected against overvoltage from

power line crosses.
Annex DVJ Equipment connected to a telecommunication and N/A
(10.6.1 ) cable distribution networks and supplied with an

earphone intended to be held against, or in the ear is

required to comply with special acoustic pressure

requirements.
Report Number: R2010162-62368 Page 56 of 69 UL-CSA-62368 Second Edition Report

 

 

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

 

Amendment 2-Circuit diagrams

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Report Number: R2010162-62368 Page 57 of 69 UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

 

1 L 1 2 1 L z 1 L

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

a

 

 

 

 

 

fi
lee

 

MEEDER

 

 

 

 

 

 

 

 

Report Number: R2010162-62368 Page 58 of 69 UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

 

EB+
# Ql
EB

Q2

Circuit diagram

ovut

 

Circuit diagram

 

Report Number: R2010162-62368 Page 59 of 69 UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

Amendment 3 — Photos

 

3.1 EUT- Top view

it

(<7)

f <—)


[=]
o>
oa
co
o

©.
o

)———
oe

aaae

oT) CEU) DOLE COAT Wii
SS Ce

 

 

WYZE CAM M OUTDOOR

 

 

| Mode wvc

EA0-71:73

C10: ZANJHWVODr
24984WvoD}

ADM NT MT
oy ee yy ee ee

 

Report Number: R2010162-62368 Page 60 of 69 UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

3.3 EUT- Side view

mi

AT

coo
a
pe
| — me
b= 7)
J
=]
So

DRAnpONTpTTTTY TUNG TTT Te AT WE
A) eI YA |S)

 

3.4 EUT- Side view

 

 

Report Number: R2010162-62368 Page 61 of 69 UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

3.5 EUT- Internal view

10 20 30

 

3.6 EUT- Internal view

Teese eS

 

 

Report Number: R2010162-62368 Page 62 of 69 UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

3.7 EUT- Internal view

STAT LTE

mnt

Ss.
td
Es
S.

=>

—)


&
oS
o
7
i
oc.
o
bs
i=]
wz
=
ie)
c=]
i> |
f=]
al

i Oa UAC agin ATL
ee

 

3.8 EUT- PCB top view

ca
{|

10 20

———
oe
ee
ae
———w
ae

PSTATACON OLEH TLLLN LESTE HITTTTTTTIT
te del a | aly

 

 

Report Number: R2010162-62368 Page 63 of 69 UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

3.9 EUT- PCB bottom view

Min

TR |)

) CUA MT AT
ee

2s il cet Me

FUUSUOTLLOT WLLL LLU UN TL LLL
ae

 

 

Report Number: R2010162-62368 Page 64 of 69 UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd.

Model: WVOD1

 

3.11 EUT-PCB bottom view

i LW

mm OL 02

i

 

 

Report Number: R2010162-62368

Page 65 of 69

UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

3.13EUT-PCB bottom view

A Tl

Z
oO
wz
So
Sr]
—)
—™
So
ad

 

 

Report Number: R2010162-62368 Page 66 of 69 UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

3.15 EUT-PCB bottom view

 

r}
|

tH

a)

pu

10 20

Seu) 7
© OF OF OS 09 O02


——

aga aa D
A ee

 

 

Report Number: R2010162-62368 Page 67 of 69 UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd. Model: WVOD1

3.17 EUT- Battery view (Model: PT124147-2S)

Riswm: costat 200
wine:
Manufacturer:Guangdong Pow-Tech New Power Co.Ltd.

Ga

To reduce risk of fire or burns .do not open,

do not disassemble.do not crush.do not puncture,

do not dispose in fire or water, PT 12a1a7=
Go not short external contacts, 2032A02019

 

Report Number: R2010162-62368 Page 68 of 69 UL-CSA-62368 Second Edition Report

 

 

TianJin HuaLai Technology Co.,Ltd.

Amendment 4—User’s manual information

WVODI1B1-KSZPO1 V1.0 TET

 

WIGHT INDICATIONS

 

 

 

 

 

FCC Radiation Exposure
Statement

 

ISEDC Radiation Expasure
Statement

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model: WVOD1

 

 

 

 

WVODIBI-KSZP01V1.0 8H
SETUP n oq TaN] ir 6 Wall Mounting
a | Coy | | 7 —
| : ae seer] Ug WU fie
= ee ae | ee |
o [| || o os oe» mi Ri] <
BE crt to Bi .- ar “ —
Hes 7 Bw. ao
n pf & ais IN THE BOX
| | Bh row Bw
es oe o ” se
” EB ste: o 1 i: an
Mi = | a“
— END OF REPORT —
Report Number: R2010162-62368 Page 69 of 69 UL-CSA-62368 Second Edition Report

 

Download Manual PDF

WYZE WVOD1 Cam Outdoor Add-on Camera
User Manual PDF Download

Leave a comment

Your email address will not be published. Required fields are marked *