Breville BES870XL Barista Express Espresso Machine, Brushed Stainless Steel User Manual

Breville BES870XL Barista Express Espresso Machine,
Brushed Stainless Steel User Manual

Breville recommends safety first

At Breville we are very safety conscious. We design and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care when using any electrical appliance and adhere to the following precautions.

Important safeguards

When using electrical appliances, basic safety precautions should always be followed, including:

• Carefully read all instructions before operating and save for future reference.
• Remove any packaging material and promotional labels or stickers before using the espresso machine for the first time.
• To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of the espresso machine.
• Do not place the espresso machine near the edge of a bench or table during operation. Ensure the surface is level, clean and free of water and other substances.
• Do not place the espresso machine on or near a hot gas or electric burner, or where it could touch a heated oven.
• Do not use the espresso machine on metal surfaces, for example, a sink drain board.
• Always ensure the espresso machine is properly assembled before connecting to a power outlet and operating.
• Do not attempt to operate the espresso machine by any method other than those described in this book.
• The espresso machine is not intended to be operated by means of an external timer or separate remote control system.
• We recommend using cold, filtered water. We do not recommend the use of de-mineralized or distilled water as this may affect the taste of the espresso and how the machine is designed to function. Do not use any other liquid.
• Never use the espresso machine without water in the water tank.
• Ensure the portafilter is firmly inserted and secured into the group head before using the machine.
• Never remove the portafilter during the brewing operation as the machine is under pressure.
• Do not touch hot surfaces. Use handles or knobs. Allow the espresso machine to cool down before moving or cleaning any parts.
• Do not place anything other than cups for warming on top of the espresso machine.
• Do not operate the grinder without the hopper lid in position. Keep fingers, hands, hair, clothing and utensils away from the hopper during operation.
• Always switch off the espresso machine by pressing the POWER button to off and unplug if appliance is to be left unattended, if not in use, before cleaning, before attempting to move the appliance, disassembling, assembling and when storing the appliance.
• Keep the espresso machine and accessories clean. Follow the cleaning instructions provided in this book.
• Do not use espresso machine attachments other than those provided. The use of accessory attachments not recommended by Breville may result in fire, electric shock or injury to persons.

IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES

• Fully unwind cord before use.
• To protect against electric shock, do not immerse cord, plug or appliance in water or any other liquid.
• Do not let the cord hang over the edge of a bench or table, touch hot surfaces, or become knotted.
• Do not leave the appliance unattended when in use.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure they do not play with the appliance.
• This appliance is recommended for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors.
• It is recommended to regularly inspect the appliance. Do not use the appliance if the power cord, power plug, or appliance becomes damaged in anyway. Immediately cease use and call Breville Consumer Support.
• For any maintenance other than cleaning, call Breville Consumer Support.
• This appliance is equipped with a power cord having a grounding wire with a grounding plug. The appliance must be grounded using a 3-hole properly grounded outlet. In the event of an electrical short circuit, grounding reduces the risk of electrical shock.
• If the appliance is of the grounded type, the extension cord should be a grounding 3-wire cord.
• If the power outlet is a standard 2-prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.
• Do not, under any circumstances, cut or remove the third (ground) prong from the power cord or use an adapter.
• Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is  properly grounded.

WARNING

Fully unwind the cord before use.

short cord instructions

Your Breville appliance is fitted with a short power cord to reduce personal injury or property damage resulting from pulling, tripping or becoming entangled with a longer cord. Longer detachable power cords or extension cords are available and may be used if care is exercised. If an extension cord is used, (1) the marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance, (2) the cord should be arranged so that it will not drape over the countertop or table where it can be pulled on by  children or tripped over unintentionally and (3) the extension cord must include a 3-prong grounding plug.

Breville Assist™ PLUG

Your Breville appliance comes with a unique Assist™ Plug, conveniently designed with a finger hole to ease removal from the power outlet.

CALIFORNIA PROPOSITION 65:

(Applicable to California residents only).
This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

Know your Breville product

Integrated Conical Burr Grinder
Stainless steel conical burrs maximize ground coffee surface area for a full espresso flavor. Upper and lower burrs are removable for cleaning.

Adjustable Grind Size
Espresso grind settings from fine to coarse for optimal extraction.

Adjustable Grind Amount
Adjust the amount of fresh ground coffee dosed into the filter basket to suit the fineness or coarseness of the grind.

Automatic Dosing
Use the FILTER SIZE button to tell the machine if you are using a 1 CUP or 2 CUP filter basket. The grinder will dispense the required amount of ground coffee for a single or double cup dose.

Hands Free Grinding
Auto stop for hands free grinding directly into the portafilter.

THE RAZOR™ Dose Trimming Tool
Patented twist blade trims down the puck to the right level for precision dosing and a consistent extraction.

Adjustable Temperature Control
For optimum coffee flavor.

PID Temperature Control
Electronic PID temperature control for increased temperature stability.

Thermocoil Heating System
Integrated stainless steel water coil accurately controls water temperature.

Commercial Style Steam Wand
Stainless steel 360° swivel-action steam wand for effortless milk texturing.

INSTANT HOT WATER
Dedicated hot water outlet for making Americanos and pre-heating cups.

Low Pressure Pre-infusion
Applies low water pressure at the start of the extraction to gently expand grinds for an even extraction.

ESPRESSO PRESSURE GAUGE
Monitors espresso extraction pressure.

Volumetric Control
Preset 1 & 2 cup volumes, manual over-ride or re programmable shot volumes.

Dry Puck Feature
Removes excess water from the ground coffee in the filter basket after extraction for easy disposal of the coffee puck.

1. ½lb bean hopper
   With locking system for easy removal, storage and transfer of coffee beans.
2. Integrated conical burr grinder
3. Grind outlet
4. Grinding activation switch
5. Hands free grinding cradle
6. GRIND SIZE selector
   Espresso grind settings from fine to coarse.
7. GRIND AMOUNT dial
   Adjust the amount of fresh ground coffee dosed into the filter basket to suit the fineness or coarseness of the grind.
8. FILTER SIZE button
   Tell the machine if you are using a 1 CUP or 2 CUP filter basket and the grinder will dispense the required amount of ground coffee for a single or double cup dose.
   
9. POWER button
10. Integrated removable 54mm tamper
11.  Group head
12. 54mm stainless steel portafilter
    With commercial style spouts.
    
13. Extra-tall cup clearance for tall mugs
14. Removable wet & dry coffee separator drip tray
    With Empty Me! tray full indicator.
    
15. Storage tray (located behind drip tray)
    Houses accessories when not in use.
16. 360˚ swivel-action steam wand
17. Dedicated hot water outlet
18. Steam/Hot Water dial
    Selector dial for steam and hot water.
19. Steam/Hot Water light
    Illuminates to indicate that the steam or hot water function is selected.
20. 1 CUP and 2 CUP buttons
    With preset, manual over-ride or re-programmable shot volumes.
21. CLEAN ME light
    Illuminates when a cleaning cycle is required.
22. Espresso pressure gauge
23. PROGRAM button
    Re-programs the preset 1 CUP and 2 CUP shot volumes.
24. Cup warming tray
25. 67 fl.oz (2L) removable water tank
    With replaceable water filter to reduce impurities and scale.

ACCESSORIES

1. Stainless steel milk jug
2. Cleaning disc
3. Cleaning tablets
4. Dual Wall filter baskets (1 cup & 2 cup)
   Use with pre-ground coffee.
   
5. Allen key
   
6. Single Wall filter baskets (1 cup & 2 cup)
   Use when grinding fresh whole coffee beans.
   
7. Cleaning tool
   
8. Water filter holder and filter
   
9. Coffee scoop
   Measures the amount of pre-ground coffee when using dual wall filter baskets.
   
10. Cleaning brush
    
11. The Razor™ precision dose trimming tool

Operating your Breville product

Before First Use

Machine Preparation

Remove and discard all labeling and packaging materials attached to your espresso machine. Ensure you have removed all parts and accessories before discarding the packaging.
Remove the water tank located at the back of the machine by lifting the water tank handle. Remove the plastic bag containing the water filter and water filter holder. Clean parts and accessories (water tank, portafilter, filter baskets, milk jug) using warm water and a gentle dish washing liquid, then rinse and dry thoroughly. Wipe the outer housing, bean hopper and drip tray with a soft damp cloth and dry thoroughly. Do not immerse the outer housing, power cord or power plug in water or any other liquid.

NOTE

All parts should be cleaned by hand using warm water and a gentle dish washing liquid. Do not use abrasive cleansers, pads or cloths which can scratch the surface. Do not clean any of the parts or accessories in the dishwasher.

Conditioning the Water Filter

• Remove the water filter and water filterm holder from the plastic bag.
• Soak the water filter in a cup of water for 5 minutes, then rinse under cold running water.
• Wash the water filter holder with cold water, taking specific care to rinse the stainless steel mesh.
• Insert the water filter into the two parts of the water filter holder.
• Set Date Dial 2 months ahead.
• To install the assembled water filter holder into the water tank, align the base of the water filter holder with the adapter inside the water tank. Push down to lock into place.
• Slide the water tank back into position at the back of the machine, ensuring to push down completely to lock into place.

NOTE

To purchase water filters contact Breville Consumer Support.

FIRST USE

Initial Start Up

• Ensure the water filter is securely fitted inside the water tank.
• Fill the water tank with cold, preferably filtered water up to the MAX mark. When replacing the water tank, ensure to push down completely to lock into place.
  NOTE Always check the water level before use and replace water daily. We recommend using cold, filtered water. We do not recommend the use of de-mineralized or distilled water or any other liquid as this may affect the taste of the espresso and how the machine is designed to function.
• Ensure the hopper is locked into position.
• Plug the power cord into a 110/120V power outlet.
• Press the POWER button to switch the machine on. The POWER button light will flash while the machine is heating.NOTE
  If the hopper is not correctly locked into position, the FILTER SIZE LED’s will flash.
• A pumping sound will be heard. This is normal.
• When the machine has reached the correct operating temperature, the POWER button light will stop flashing and all button lights on the control panel will illuminate. The machine is now in STANDBY mode, ready for the next step ‘Flushing The Machine’.

Flushing the Machine

It is recommended to complete a water flushing operation, without ground coffee, to ensure the machine has been conditioned.
When the machine has reached STANDBY mode, follow these steps:

1. Press 2 CUP button to run hot water through the group head.
2. Position the steam wand tip over the drip tray. Rotate the STEAM/HOT WATER dial to the STEAM position and run steam through the steam wand for 10 seconds.
   
3. Rotate the STEAM/HOT WATER dial to the HOT WATER position and run water through the hot water outlet for 10 seconds.
   
4. Repeat steps 1–3 until the water tank is empty.

GENERAL OPERATION

Setting the Grind Size

The grind size will affect the rate of water flow through the coffee in the filter basket and the flavor of the espresso. When setting the grind size, it should be fine but not too fine and powdery.
There are numbered settings on the GRIND SIZE selector. The smaller the number, the finer the grind size. The larger the number, the coarser the grind size. We recommend you start at setting 5 and adjust as required.

Setting the Grind Amount

Set the GRIND AMOUNT dial to the 3 o’clock position as a starting point. Adjust towards LESS or MORE as required to adjust the dose amount so the metal cap on the supplied tamper is level with the top edge of the filter basket rim, AFTER tamping.

TIP
It is normal that the GRIND SIZE selector and GRIND AMOUNT dial will need to be adjusted a few times to achieve the correct extraction rate. Start with the suggested settings, extract an espresso, then refer to the Extraction Guide, page 25, to determine what adjustments need to be made.

Selecting the Filter Size

Insert either the 1 CUP or 2 CUP filter basket into the portafilter (see ‘Selecting a Filter Basket’, page 22). Press the FILTER SIZE button to select SINGLE if using the 1 CUP filter basket, or DOUBLE if using the 2 CUP filter basket.

Automatic Dosing

• Ensure the hopper is locked into position and is filled with fresh coffee beans.
• Ensure the filter basket is completely dry before placing the portafilter into the grinding cradle.
• Push and release the portafilter to engage the grinding activation switch, then allow fresh ground coffee to fill the portafilter.
• Grinding will automatically stop, however if you wish to stop grinding before the cycle has finished, push and release the portafilter.
  NOTE
  It is normal for the portafilter to appear overfilled with ground coffee. Untamped coffee is three times the volume of tamped coffee.

Manual Dosing

• If you prefer to manually dose, with the portafilter inserted in the grinding cradle, push and hold the portafilter to engage the grinding activation switch. Continue holding until the desired amount of ground coffee has been dosed.
• To stop grinding, release the portafilter. This will release the grinding activation switch and stop the grinding function.

Tamping the Ground Coffee

• Once grinding is complete, carefully withdraw the portafilter from the grinding cradle.
• Tap the portafilter several times to collapse and distribute the coffee evenly in the filter basket.
• Tamp down firmly using approx. 30–40lbs (15 20kgs) of pressure. The amount of pressure is not as important as consistent pressure every time.
• As a guide to dose, the top edge of the metal cap on the tamper should be level with the top of the filter basket AFTER the coffee has been tamped.

Trimming the Dose

The Razor™ precision dose trimming tool allows you to trim the puck to the right level for a consistent extraction.

• Insert the Razor™ dose trimming tool into the filter basket until the shoulders of the tool rest on the rim of the basket. The blade of the dose trimming tool should penetrate the surface of the tamped coffee.
• Rotate the Razor™ dose trimming tool back and forth while holding the portafilter on an angle over a knock box to trim off excess coffee grinds. Your filter basket is now dosed with the correct amount of coffee.
  
• Wipe excess coffee from the rim of the filter basket to ensure a proper seal is achieved in the group head.

Purging the Group Head
Before placing the portafilter into the group head, run a short flow of water through the group head by pressing the 1 CUP button. This will stabilize the temperature prior to extraction.

Inserting the Portafilter

Place the portafilter underneath the group head so that the handle is aligned with the INSERT position. Insert the portafilter into the group head and rotate the handle towards the center until resistance is felt.

Preset Shot Volume – 1 CUP button
Press the 1 CUP button once to extract a single shot of espresso at the preset volume (approx. 1oz / 30ml). The extraction will start using the low pressure pre infusion (see page 16). The machine will stop after the preset volume has been extracted.

NOTE
The amount of espresso extracted in the cup will vary depending on your grind size and grind amount settings.

NOTE
Pressing the 1 CUP or 2 CUP button during a preset shot volume will immediately stop the extraction.

Preset Shot Volume – 2 CUP button
Press the 2 CUP button once to extract a double shot of espresso at the preset volume (approx. 2oz / 60ml). The extraction will start using the low pressure pre infusion (see page 16). The machine will stop after the preset volume has been extracted.

Re-Programming Shot Volume – 1 CUP Button

1. To begin programming, press the PROGRAM button once. The machine will beep once and the PROGRAM button will begin to flash. This indicates the machine is in programming mode.
2. Press 1 CUP button to start espresso extraction. Press 1 CUP button again once desired volume of espresso has been extracted. The machine will beep twice to indicate the new 1 CUP volume has been set.

Re-Programming Shot Volume – 2 CUP Button

1. To begin programming, press the PROGRAM button once. The machine will beep once and the PROGRAM button will begin to flash. This indicates the machine is in programming mode.
2. Press 2 CUP button to start espresso extraction. Press 2 CUP button again once desired volume of espresso has been extracted. The machine will beep twice to indicate the new 2 CUP volume has been set.

Resetting Default Volumes
To reset the machine to the default 1 CUP and 2 CUP shot volumes, press and hold the PROGRAM button until the machine beeps three times. Release the PROGRAM button. The machine will return to its original default volume settings and default espresso water temperature (see ‘Advanced Temperature Mode’, page 19).

NOTE
Default settings: 1 CUP shot volume is approx. 1oz / 30ml. 2 CUP shot volume is approx. 2oz / 60ml.

Manual Shot Volume

Manually control low pressure pre-infusion time and shot volume without re-programming the preset shot volume. Press and hold the 1 CUP or 2 CUP button. The extraction will enter low pressure pre-infusion until the button is released. When the 1 CUP or 2 CUP button is released, extraction will continue at full pressure. Press the 1 CUP or 2 CUP button again once the desired volume of espresso has been extracted.

NOTE
For optimal flavor when using a 1 CUP filter basket, you should extract approx. 1oz / 30ml. When using a 2 CUP filter basket, you should extract approx. 2oz / 60ml.

Under Extracted Zone

The gauge needle, when positioned in the lower zone during extraction, indicates the espresso has been extracted with insufficient pressure.

This occurs when the water flow through the ground coffee is too fast and results in an under extracted espresso that is watery and lacks crema and flavor.
Causes for under extraction include the grind being too coarse and/or insufficient coffee in the filter basket and/or under tamping.

Over Extracted Zone

The gauge needle, when positioned in the upper zone during extraction, indicates the espresso has been extracted with too much pressure.

This occurs when the water flow through the ground coffee is too slow and results in an over extracted espresso that is very dark and bitter with a mottled and uneven crema.
Causes for over extraction include the grind being too fine and/or too much ground coffee in the filter basket and/or over tamping.

USING THE STEAM/ HOT WATER DIAL

Steam

• Position the steam wand tip over the drip tray.
• Turn the STEAM/HOT WATER dial to the STEAM position. The STEAM/ HOT WATER light will flash to indicate the machine is heating to create steam. During this time, condensed water may purge from the steam wand. This is normal.

NOTE
When the machine creates steam, a pumping noise can be heard. This is the normal operation of the 15 bar Italian pump.

• When the STEAM/HOT WATER light stops flashing the steam wand is ready for use.
• Before inserting the wand into the milk, pause the steam by returning the dial back to the STANDBY position. Then within 8 seconds, insert the steam wand tip ¼–¾” (1–2cm) below the surface of the milk, close to the right hand side of the jug at the 3 o’clock position and quickly turn the dial back to the STEAM position. Pausing the steam avoids the milk splashing out of the jug (this pause function lasts for 8 seconds only).
• Once the milk is at the correct temperature (140–149°F or 60–65°C) and the jug is hot to touch, return the dial to the STANDBY position BEFORE removing the jug.

For more tips on milk texturing, refer to ‘Texturing Milk’, page 23.

NOTE
After 5 minutes of continuous steaming, the machine will automatically disable the steam function. The STEAM/HOT WATER light will flash. When this occurs return the dial to the STANDBY position.

Hot Water

• Turn the STEAM/HOT WATER dial to the HOT WATER position. The STEAM/ HOT WATER light will flash to indicate the machine is heating to create hot water.
• When the STEAM/HOT WATER light stops flashing the hot water is up to temperature. Hot water will pour from the hot water outlet and can be used for making Americanos and pre-heating cups.
• To stop the hot water, return the dial to the STANDBY position.

AUTO PURGE

Immediately after the espresso, hot water and steam functions, the machine will purge water into the drip tray. This ensures the thermocoil is at the optimal temperature.

TIP
Ensure the drip tray is firmly pushed in place and emptied whenever the Empty Me! indicator is displayed.

SLEEP & AUTO OFF MODE

The machine automatically switches to SLEEP MODE after 1 hour. During this time, the POWER button light will flash slowly. After 3 hours, the machine will switch to AUTO OFF MODE.
To re-activate the machine, press any button except for the POWER button. The POWER button light will flash while the machine re-heats. A pumping sound will be heard. This is normal. When the machine has reached the correct operating temperature, the POWER button light will stop flashing and all button lights on the control panel will illuminate.

ADVANCED TEMPERATURE MODE

Adjusting Water Temperature

Different beans require a different water temperature to extract their optimum flavor.
The Barista Express™ allows you to adjust water temperature ±4°F in 2°F increments from the default temperature.
To enter Advanced Temperature Mode:

1. Press the POWER button to switch the machine off.
2. Press & hold the PROGRAM button, then press the POWER button. The machine will beep once. The illuminated button will indicate the current temperature selected. To adjust the water temperature, press one of the following buttons within 5 seconds of entering Advanced Temperature Mode. The machine will beep twice to confirm the change. If no buttons are pressed within 5 seconds after entering Advanced Temperature Mode, no change will be made & the machine will return to STANDBY mode.

Default Temperature setting:
In Advanced Temperature Mode, press the PROGRAM button.

Increase Water Temperature +2˚F:
In Advanced Temperature Mode, press the 1 CUP button.

Increase Water Temperature +4˚F:
In Advanced Temperature Mode, press the 2 CUP button.

Decrease Water Temperature -2˚F:
In Advanced Temperature Mode, press the FILTER SIZE button.

Decrease Water Temperature -4˚F:
In Advanced Temperature Mode, press the POWER button.

COFFEE MAKING TIPS & PREPARATION

PRE-HEATING

Heating your cup or glass

A warm cup will help maintain the coffee’s optimal temperature. Pre-heat your cup by rinsing with hot water from the hot water outlet and place on the cup warming tray.

Heating the portafilter and filter basket

A cold portafilter and filter basket can reduce the extraction temperature enough to significantly affect the quality of your espresso. Always ensure the portafilter and filter basket are pre-heated with hot water from the hot water outlet before initial use.

NOTE
Always wipe the portafilter and filter basket dry before dosing with ground coffee as moisture can encourage ‘channeling’ where water by-passes the ground coffee during extraction.

SELECTING A FILTER BASKET

Single Wall Filter Baskets

Use Single Wall filter baskets if grinding fresh whole coffee beans.
Single Wall filter baskets allow you to experiment with grind, dose and tamp to create a more balanced espresso.

Dual Wall Filter Baskets
Use Dual Wall filter baskets if using pre-ground coffee.
Dual Wall filter baskets regulate the pressure and help to optimize the extraction regardless of the grind, dose, tamp pressure or freshness.

NOTE
Regardless of whether you use Single Wall or Dual Wall filter baskets, use the 1 CUP basket when brewing a single cup and the 2 CUP basket when brewing two cups or a stronger single cup or mug.

The provided filter baskets are designed for: 1 CUP basket = approx. 8–10g. If using pre-ground coffee, this is approx. 2 level scoops of the provided coffee scoop. 2 CUP basket = approx. 15–18g. If using pre-ground coffee, this is approx. 3 level scoops of the provided coffee scoop. If using freshly ground coffee, this is approx. 4 level scoops of the provided coffee scoop. The reason for this difference is that pre ground coffee is often coarser and hence occupies more volume than coffee that is more finely ground.

NOTE
You may need to experiment with how much coffee is inserted into the filter basket or how long the grinder needs to run to achieve the correct dose. For example, when using a finer espresso grind with the Single Wall filter baskets, you may need to increase the grind amount to ensure the filter basket is correctly dosed.

THE GRIND

If grinding coffee beans, the grind size should be fine but not too fine. The grind size will affect the rate at which the water flows through the ground coffee in the filter basket and the taste of the espresso.

If the grind is too fine (looks like powder and feels like flour when rubbed between fingers), the water will not flow through the coffee even when under pressure. The resulting espresso will be OVER EXTRACTED, dark in color and bitter in flavor.

If the grind is too coarse the water will flow through the ground coffee in the filter basket too quickly. The resulting espresso will be UNDER EXTRACTED and lacking in color and flavor.

COFFEE DOSE AND TAMPING

Follow the instructions for:

1. Setting the Grind Size, page 13.
2. Setting the Grind Amount, page 13.
3. Selecting the Filter Size, page 13.
4. Automatic Dosing or Manual Dosing, page 13–14.
5. Tamping the Ground Coffee, page 14.
6. Trimming the Dose, page 14.

PURGING THE GROUP HEAD

Before placing the portafilter into the group head, run a short flow of water through the group head by pressing the 1 CUP button. This will purge any ground coffee residue from the group head and stabilize the temperature prior to extraction.

INSERTING THE PORTAFILTER

Place the portafilter underneath the group head so that the handle is aligned with the INSERT position. Insert the  portafilter into the group head and rotate the handle towards the center until resistance is felt.

EXTRACTING ESPRESSO

• Place pre-warmed cup(s) beneath the portafilter and press the 1 CUP or 2 CUP button for the desired volume.
• Due to pre-infusion time, the espresso will not start to flow immediately.
• As a guide, the espresso will start to flow after 4–7 seconds (infusion time) and should be the consistency of dripping honey.
• If the espresso starts to flow after less than 3 seconds you have either under dosed the filter basket and/or the grind is too coarse. This is an UNDEREXTRACTED shot.
• If the espresso starts to drip but doesn’t flow after 8 seconds, then you have either over dosed the filter basket and/or the grind is too fine. This is an OVER-EXTRACTED shot.

A great espresso is about achieving the perfect balance between sweetness, acidity and bitterness. The flavor of your coffee will depend on many factors, such as the type of coffee beans, degree of roast, freshness, coarseness or fineness of the grind, dose of ground coffee, and tamping pressure.
Experiment by adjusting these factors just one at a time to achieve the taste of your preference, see ‘Extraction Guide,’ page 25.

TEXTURING MILK

There are two phases to texturing milk. The first is stretching the milk to aerate it and the second is swirling the milk to make it silky smooth. These two operations should blend into one.

• Always start with fresh cold milk.
• Fill the jug just below the “V” at the bottom of the spout.
• Position the steam wand tip over the drip tray and turn the STEAM/HOT WATER dial to the STEAM position. The STEAM/HOT WATER light will flash to indicate the machine is heating to create steam. During this time, condensed water may purge from the steam wand. This is normal. When the STEAM/HOT WATER light stops flashing the steam wand is ready for use.
  NOTE
  When the machine creates steam, a pumping noise can be heard. This is the normal operation of the 15 bar Italian pump.
• Before inserting the wand into the milk, pause the steam by returning the dial back to the STANDBY position. Then within 8 seconds, insert the steam wand tip ¼-¾” (1-2cm) below the surface of the milk, close to the right hand side of the jug at the 3 o’clock position and quickly turn the dial back to the STEAM position. Pausing the steam avoids the milk splashing out of the jug (this pause function lasts for 8 seconds only).
• Keep the tip just under the surface of the milk until the milk is spinning clockwise, producing a vortex (whirlpool effect).
• With the milk spinning, slowly lower the jug. This will bring the steam tip to the surface of the milk & start to introduce air into the milk. You may have to gently break the surface of the milk with the tip to get the milk spinning fast enough.
• Keep the tip at or slightly below the surface, continuing to maintain the vortex. Texture the milk until sufficient volume is obtained.
• Lift the jug to lower the tip beneath the surface, but keep the vortex of milk spinning. The milk is at the correct temperature (140-149°F or 60-65°C) when the jug is hot to touch.
• Turn off steam BEFORE taking the tip out of the milk.
• Set the jug to one side. Immediately wipe the steam wand with a damp cloth. Then, with the steam wand tip directed over the drip tray, briefly turn steam on to clear any remaining milk from inside the steam wand.
• Tap the jug on the bench to collapse any bubbles.
• Swirl the jug to “polish” and re-integrate the texture.
• Pour milk directly into the espresso.
• The key is to work quickly, before the milk begins to separate.

HINTS & TIPS

• Fresh, quality coffee beans will give you the best possible extraction.
• We recommend quality 100% Arabica beans with a ‘Roasted On’ date stamped on the bag, not a ‘Best Before’ or ‘Use By’ date.
• Coffee beans are best consumed between 5–20 days after the ‘Roasted On’ date. Ideally only grind directly before the extraction to maximize flavor.
• Buy coffee beans in small batches to reduce the storage time.
• Store coffee beans in a cool, dark and dry container. Vacuum seal if possible.

Extraction Guide

CARE & CLEANING

REPLACING THE WATER FILTER

The provided water filter helps prevent scale build-up in and on many of the inner functioning components. Replacing the water filter every two months will reduce the need to decalcify the machine.
If you live in a hard water area, we recommend you change the water filter more frequently.

• Remove the new water filter from the plastic bag.
• Soak the new water filter in a cup of water for 5 minutes, then rinse under cold running water.
• Wash the water filter holder with cold water, taking specific care to rinse the stainless steel mesh.
• Insert the new water filter into the two parts of the water filter holder.
• Set Date Dial 2 months ahead.
• To install the assembled water filter holder into the water tank, align the base of the water filter holder with the adapter inside the water tank. Push down to lock into place.
• Slide the water tank back into position at the back of the machine, ensuring to push down completely to lock into place.

The water filter should be removed if using filtered or bottled water.

NOTE
To purchase water filters contact Breville Consumer Support.

CLEANING CYCLE

The CLEAN ME light will illuminate when a cleaning cycle is required. This is a back-flushing cycle and is separate from decalcifying.

1. Insert the 1 CUP filter basket into the portafilter, followed by the supplied cleaning disc, followed by 1 cleaning tablet.
2. Lock the portafilter into the group head and place a large container beneath the portafilter spouts.
3. Ensure the water tank is filled with cold water and the drip tray is empty.
4. Press the POWER button to switch the machine off.
5. Press the 1 CUP and 2 CUP buttons simultaneously, then also press the POWER button. Hold all 3 buttons together for approximately 10 seconds.
6. The cleaning cycle will commence and last for approximately 5 minutes. During this time, water will intermittently flow from the portafilter spouts. Once complete, 3 beeps will sound.
7. Remove the portafilter and ensure the tablet has completely dissolved. If the tablet has not dissolved, repeat until the tablet has dissolved.

DECALCIFYING

After regular use, hard water can cause mineral build up in and on many of the inner functioning components, reducing the brewing flow, brewing temperature, power of the machine, and taste of the espresso. We advise decalcifying the machine every month and especially if not using the machine for an extended period eg. before going on vacation.

1. Press the POWER button to switch the machine off.
2. Pour a 50/50 mixture of white vinegar and cold tap water into the water tank.
3. Remove the portafilter from the group head and place a large container beneath the group head and steam wand.
4. Press the POWER button to switch the machine on. When the brewing temperature has been reached and all the button lights on the control panel have illuminated, press and hold the 1 CUP button to commence a manual pour. Release the button once half the mixture of white vinegar and water has run through the group head.
5. Set the STEAM/HOT WATER dial to the hot water position and allow hot water to run through the hot water outlet for approximately 30 seconds. Return the dial back to the STANDBY position.
6. Set the STEAM/HOT WATER dial to the STEAM position and allow steam to run through the steam wand for approximately 2 minutes. Return the dial back to the STANDBY position.
7. If any of the mixture remains in the water tank, press and hold the 1 CUP button to commence a manual pour. Release the button once the tank is empty and nothing runs through the group head.
8. In harder water environments, we recommend repeating this cycle.
9. After decalcifying, remove the water tank, rinse thoroughly then refill with fresh cold water only. To rinse the machine, repeat steps 3–7.

WARNING

Do not immerse power cord, power plug or appliance in water or any other liquid. The water tank should never be removed or completely emptied during decalcifying.

CLEANING THE CONICAL BURR GRINDER

This grinder cleaning cycle removes oil build-up on the burrs which can impede performance.

ADVANCED CLEANING FOR THE CONICAL BURR GRINDER

This step is only required if there is a blockage between the grinding burrs and the grinder outlet.

WARNING

Care should be taken as the grinder burrs are extremely sharp.

CLEANING THE STEAM WAND

• The steam wand should always be cleaned after texturing milk. Wipe the steam wand with a damp cloth. Then with the steam wand tip directed over the drip tray, briefly set the STEAM/ HOT WATER dial to the STEAM position. This will clear any remaining milk from inside the steam wand.
• If any of the holes in the tip of the steam wand become blocked, ensure the STEAM/HOT WATER dial is in the STANDBY position. Press the POWER button to switch the machine off and allow to cool. Use the pin on the end of the provided cleaning tool to unblock the hole(s).
• If the steam wand remains blocked, remove the tip using the integrated spanner in the cleaning tool and soak in hot water. Use the pin on the end of the provided cleaning tool to unblock the hole(s) before re-attaching to the steam wand.

CLEANING THE FILTER BASKETS AND PORTAFILTER

• The filter baskets and portafilter should be rinsed under hot water immediately after use to remove all residual coffee oils.
• If any of the holes in the filter basket become blocked, use the pin on the end of the provided cleaning tool to unblock the hole(s).
• If the hole(s) remain blocked, dissolve a cleaning tablet in hot water and soak filter basket and portafilter in solution for approx. 20 minutes. Rinse thoroughly.

CLEANING THE SHOWER SCREEN

• The group head interior and shower screen should be wiped with a damp cloth to remove any ground coffee particles.
• Periodically purge the machine. Place an empty filter basket and port filter into the group head. Press and hold the 1 CUP button and run a short flow of water to rinse out any residual coffee.

CLEANING THE DRIP & STORAGE TRAY

• The drip tray should be removed, emptied and cleaned at regular intervals, particularly when the drip tray full indicator is showing EMPTY ME!
• Remove the grid from the drip tray. Lift the coffee grind separator and dispose of any coffee grounds. The EMPTY ME! indicator can also be removed from the drip tray by pulling upwards to release the side latches. Wash all parts in warm soapy water with a soft cloth. Rinse and dry thoroughly.
• The storage tray (located behind the drip tray) can be removed and cleaned with a soft, damp cloth. Do not use abrasive cleansers, pads or cloths which can scratch the surface.

NOTE
All parts should be cleaned by hand using warm water and a gentle dish washing liquid. Do not use abrasive cleansers, pads or cloths which can scratch the surface. Do not clean any of the parts or accessories in the dishwasher.

CLEANING THE OUTER HOUSING & CUP WARMING TRAY

The outer housing and cup warming tray can be cleaned with a soft, damp cloth. Polish with a soft, dry cloth. Do not use abrasive cleansers, pads or cloths which can scratch the surface.

STORING YOUR MACHINE

Before storing, ensure the STEAM/HOT WATER dial is in the STANDBY position, press the POWER button to switch the machine off and remove the plug from the power outlet. Remove unused beans from the hopper, clean the grinder (see page 29), empty the water tank and the drip tray.
Ensure the machine is cool, clean and dry. Insert all accessories into the storage tray. Store upright. Do not place anything on top.

WARNING

Do not immerse power cord, power plug or appliance in water or any other liquid.

USING THE ALLEN KEY

Over time, the silicone seal surrounding the shower screen will need to be replaced to ensure optimum brewing performance.

1. Press the POWER button to switch the machine off and unplug the cord from the power outlet.
2. Carefully remove the water tank and drip tray, taking particular care if they are full.
3. Using a skewer or similar, clean the center of the screw of any residual coffee.
4. Insert the shorter end of the Allen Key into the center of the screw. Turn counter-clockwise to loosen the screw.
   
5. Once loosened, carefully remove and retain the screw, stainless steel shower screen and black dispersion plate. Make note of the side of the shower screen and dispersion plate that are facing downwards. This will make re-assembly easier. Wash the shower screen and dispersion plate in warm soapy water, then dry thoroughly.
6. Remove the silicone seal with your fingers or a pair of long-nose pliers. Insert the new seal, flat side first, so the ribbed side is facing you.
   
7. Re-insert the dispersion plate, then the shower screen, then the screw. With your fingers, turn the screw clockwise for 2-3 revolutions then insert the Allen Key to tighten until the screw is flush with the shower screen. Do not overtighten screw.
8. Re-insert the drip tray and water tank. Contact Breville Consumer Support or visit www.breville.com for replacement silicone seals or for advice.

TROUBLESHOOTING

COFFEES TO TRY

CAPPUCCINO

A single shot of espresso with textured milk, garnished with drinking chocolate.

ESPRESSO

Intense and aromatic, it is also known as a short black and is served in a small cup or glass.

LATTE

A latté consists of a single espresso with textured milk and approx. 10mm of foam.

MACCHIATO

Traditionally served short, the macchiato is also poured as a long black with a dash of milk or a dollop of textured milk.

AMERICANO

A shot of espresso (single or double) with hot water. Also known as a long black.

RISTRETTO

A ristretto is an extremely short espresso of approximately 15ml, distinguished by its intense flavor and aftertaste.

Breville Consumer Support

USA
Mail: Breville USA 19400 S. Western Ave Torrance CA 90501-1119
Phone: 1-866-273-8455
1-866-BREVILLE
Web: brevilleusasupport.com

Canada
Mail: Breville Canada 2555, Avenue de l’Aviation Pointe Claire (Montreal) Quebec H9P 2Z2
Phone: 1-855-683-3535
Email: [email protected]

www.breville.com
Breville is a registered trademark of Breville Pty. Ltd. A.B.N. 98 000 092 928.
Copyright Breville Pty. Ltd. 2013.
Due to continued product improvement, the products illustrated/photographed in this book may vary slightly from the actual product.
Model BES870XL Issue – B13

CONGRATULATIONS

on the purchase of your Breville product

Register online for product support and exclusive offers.

USA Consumers: www.brevilleusa.com
Canadian Consumers: www.breville.ca

*Registering is not a substitute for proof of purchase when submitting a Warranty Claim.

Download Manual PDF

Breville BES870XL Barista Express Espresso Machine,
Brushed Stainless Steel User Manual PDF Download