C2G 41600 Hdmi® Distribution Amplifier Splitter –
4k 60hz 2-Port User Guide

Product Overview

Front Panel

C2G41600 2-Port Hdmi® Distribution Amplifier Splitter - 4k 60hz User Manual - Front Panel

Rear Panel

C2G41600 2-Port Hdmi® Distribution Amplifier Splitter - 4k 60hz User Manual - Rear Panel


  • Distributes one HDMI input signal to two HDMI displays
  • Supports HDMI 2.0b Specifications, including:
    ✔ Data rates up to 18.0 Gbps
    ✔ HDR and 3D
    ✔ HD lossless audio formats
  • HDCP 2.2 compliant
  • Each HDMI output supports scaling down to 1080P individually (fps will not change during scaling down from 4K to 1080P)
  • HDMI Input and output cable length up to 10m/33ft (input) + 15m/50ft (output) for [email protected], up to 5m/16ft (input) + 5m/16ft (output) for [email protected]
  • Front panel LED indication for I/O and Power connectivity
  • Automatic input cable equalization for signal regeneration compensation

Package Contents

  • 1 x Splitter
  • 1 x Power Adapter (DC 5V 1A) with US, UK, EU and AU Pins
  • 2 x Mounting Bracket (with screws)
  • 1 x Manual

Mounting Bracket Installation

Note: Before installation, please ensure the unit is disconnected from the power source.

  1. Remove the four screws that secure the side panels to the device.
  2. Position and install the mounting brackets with the four mounting screws provided in the package.
  3. Attach the brackets to the surface you want to mount to using screws (not included).

C2G41600 2-Port Hdmi® Distribution Amplifier Splitter - 4k 60hz User Manual - Mounting Bracket Installation



  • Before wiring, disconnect the power from all devices.
  • During wiring, connect and disconnect the cables gently.

C2G41600 2-Port Hdmi® Distribution Amplifier Splitter - 4k 60hz User Manual - Wiring

Steps for device wiring:

  1. Connect HDMI IN Connect an HDMI source device to HDMI IN of the splitter using a high-quality HDMI cable (e.g. PC, Blu-ray player, Apple TV, STB, etc.).
  2. Connect HDMI OUT Connect HDMI display devices to HDMI OUT (1-2) of the splitter (e.g. TV, projector, LCD/LED display, etc.).
  3. 3. Connect the power supply provided to the splitter.
  4. Power on all attached devices.


Steps for Regular Troubleshooting

  1. Power: Ensure the source, display devices and splitter are powered on.
  2. Indicator: Ensure all LED indicators of the splitter are normal according to user manual.
  3. Devices: Ensure picture can be shown normally when connecting source to display device directly.
  4. Cable: Plug in and out the HDMI cable or try another HDMI cable. Ensure the specific cable length is within the available transmission range according to Features section.
  5. Compatibility: Please test other source and display devices to determine if it is a compatibility issue.

Important Safety Information

Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit.

Liquid: If this unit or it’s corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product.

In case of a storm, it is recommended that you unplug this device from the outlet.

Avoid placing this product next to objects that produce heat such as portable heaters, space heaters, or heating ducts.

THERE ARE NO USER SERVICEABLE PARTS. Do not attempt to open this product and expose the internal circuitry. If you feel that the product is defective, unplug the unit and refer to the warranty information section of this manual.

C2G Warranty

At C2G we want you to be totally confident in your purchase. That is why we offer a warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 800-293-4970 or www.c2g.com.

FCC Statement
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

FCC Statement – §15.105(b):
“This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution – §15.21:
“Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.”
C2G41600 2-Port Hdmi® Distribution Amplifier Splitter - 4k 60hz User Manual - Warning & Manual icon© 2021 Legrand All Rights Reserved rev.06/21 Manual_C2G41600

C2G Logo

6500 Poe Avenue Dayton, OH 45414 Phone 800.293.4970 www.c2g.com

Download PDF

C2G 41600 Hdmi® Distribution Amplifier Splitter –
4k 60hz 2-Port User Guide PDF Download

Join the Conversation

1 Comment

Leave a comment


  • Admin

Your email address will not be published.