Jabra Drive User Manual

Jabra Drive User Manual

THANK YOU

Thank you for purchasing the Jabra DRIVE Bluetooth® in-car speakerphone. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your in-car speakerphone.

ABOUT YOUR JABRA DRIVE

  • A Status light
  • B Answer/end button C Volume control
  • D Integrated Visor Clip E Microphone
  • F    On/off switch
  • G   Micro USB charging connector

Jabra Drive User Manual - ABOUT YOUR JABRA DRIVE

WHAT YOUR JABRA DRIVE CAN DO

Your Jabra DRIVE lets you do all this:

  • Answer calls
  • End calls
  • Reject calls*
  • Voice dialing*
  • Last number redial*
  • Mute
  • Third party calling*
  • Adjust volume
  • Transmit mobile music, podcasts and directions from a GPS app
  • Advanced Multiuse™ – Stay connected to two active Bluetooth devices at the same time

Specifications

  • Talk time up to 20 hours/Standby time up to 30 days
  • Charging time approximately 2 30 min.
  • Digital sound enhancement via DSP technology
  • Noise cancellation through DSP
  • Echo cancellation through DSP
  • A2DP (Advanced Audio Distribution Profile) for transmitting music, podcasts and directions from a GPS app on your phone
  • Jabra Status Light (battery status, call status, connection status)
  • Size: H104 mm W56 mm D18 mm
  • Weight 100 grams
  • Operating range up to 10 meters (approximately 33 feet)
  • Supported Bluetooth profiles: HFP, HSP, A2DP
  • Bluetooth specification version 0
  • e-SCO for enhanced audio quality
  • Rechargeable battery with charging option from car charger or via USB cable

HOW TO PRESS THE BUTTONS

Instruction Duration of press
Tap Press briefly
Double Tap 2 quickly repeated taps
Press Approx. 1-2 seconds
Press and hold Approx. 5 seconds

WHAT THE LIGHT MEANS

Status Light Speakerphone Status
The status light behind the answer/end button flashes rapidly blue Pairing mode
The status light turns solid blue and goes into standby light mode Connected
The status light flashes blue every 2nd second Standby/Idle
The status light flashes blue every second Incoming call
The status light turns solid blue Active call
The status light is flashing red There is less than 30 min. talk time left
The status light turns red The unit is charging
The status light turns green Fully charged or the charging level is between 70% and fully charged

GETTING STARTED

You should follow three steps before using your speakerphone

  1. Charge your Jabra DRIVE
  2. Turn your Jabra DRIVE on
  3. Pair your Jabra DRIVE with your mobile phone

 The Jabra DRIVE is easy to operate. The answer/end button on the speakerphone performs different functions depending on how long you press it.

CHARGING YOUR JABRA DRIVE

Make sure that your speakerphone is fully charged for two hours before you start using it.

Use the USB cable to connect Jabra DRIVE to the car charger. Plug the car charger into your car’s power outlet. The status light will light up red while charging. When fully charged the status light turns green. Jabra DRIVE can be charged outside your car by only using the USB cable. Use only the charger provided in the box – do not use chargers from any other devices as this may damage your speakerphone.

Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. We therefore recommend that you recharge your device at least once a month.

Jabra Drive User Manual - GETTING STARTED

TURNING YOUR JABRA DRIVE ON AND OFF

Slide the on/off switch to turn the speakerphone on or off.

Sleep mode and Auto OFF
When not connected to a phone, the speakerphone turns off automatically after 10 minutes. Use the on/off switch to turn the speakerphone on again.

Jabra Drive User Manual - Sleep mode and Auto OFF

PAIRING YOUR JABRA DRIVE WITH YOUR PHONE

Jabra DRIVE is connected to a mobile phone using a procedure called ‘pairing’. By following a few simple steps, a phone can be paired with the speakerphone in a matter of minutes.

  1. Activate Bluetooth® on your mobile phone
    Please check the manual for your mobile phone.
  2. Put the speakerphone in pairing mode
    When you turn on your Jabra DRIVE for the first time, the speakerphone will automatically start up in pairing mode – i.e. it can be detected by your phone. When the speakerphone is in pairing mode the status light will flash rapidly blue.
  3. Set your Bluetooth® phone to ‘search’ for the JABRA DRIVE
    Follow your phone’s instruction guide. First make sure that Bluetooth® is activated on your mobile phone. Then set your phone to search for devices. This usually involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth®’ menu on your phone and selecting the option to ‘search’ or ‘add’ a Bluetooth® device.*
  4. Your phone will find the Jabra DRIVE
    Your phone will find the speakerphone under the name “JABRA DRIVE”. Your phone then asks if you want to pair with the JABRA DRIVE. Accept by pressing ‘Yes’ or ‘OK’ on the phone and/or confirm with the passkey or PIN = 0000 (4 zeros). Your phone will confirm when pairing is complete.

Jabra Drive User Manual - Your phone will find the Jabra DRIVE

Manual pairing mode

If you wish to use the speakerphone with a different phone, or if the pairing process was interrupted, you can manually set the speakerphone to pairing mode.

Turn the speakerphone on. Press and hold the answer/end button for approximately 5 seconds until the status light stars blinking rapidly blue. Then repeat steps 2. and 3. in the above pairing guide.

CONNECTING WITH YOUR PHONE AUTOMATICALLY

Pairing is only needed the first time a speakerphone and phone are used together. When the speakerphone and phone have been paired once they will automatically connect when the speakerphone is on and Bluetooth® is activated on the phone. The speakerphone can be used when it is “connected” to the phone. If the devices are paired, but do not immediately connect, tap the answer/end button.

Read More – Hama Connect 2 Switch KVM Switch, incl. Cable, 4 Ports User Manual

PLACING JABRA DRIVE IN YOUR VEHICLE

The Jabra DRIVE sits discreetly and conveniently on the sun visor using the integrated metal clip. The product can be easily taken on and off the sun visor. For optimal sound quality place the Jabra DRIVE right in front of you and speak directly into the speakerphone.

Jabra Drive User Manual - PLACING JABRA DRIVE IN YOUR VEHICLE

ADDITIONAL FEATURES

Play music and GPS directions*
Make sure that the speakerphone and mobile phone are connected. When you play music or GPS application directions from your mobile phone it will automatically transfer to your speakerphone. If your phone does not allow this feature, press the answer/end button to transfer the music to the speakerphone.

Music or GPS directions will automatically be paused when you have an incoming call. When the call is ended it will start playing again.

Easy Voice Guidance**

  • Easy voice guidance informs you about your connection and low battery
  • Connected is announced when the in-car speakerphone reconnects with your
  • Low battery is announced every 10th min when there is less than 30 talk time on your Jabra DRIVE.

Advanced Multiuse™

  • Jabra DRIVE can be connected to two mobile devices at the same To learn more about Advanced Multiuse™ please go to the HOW TO HANDLE CALLS FROM TWO MOBILE PHONES section

HOW TO HANDLE CALLS FROM A SINGLE PHONE

Function How to perform
Single call
Answer or end a call Tap the answer/end button on your speakerphone to answer or end a call
Make a call The call will automatically transfer to your speakerphone*. If not tap the answer/end button
Reject a call* Double tap the answer/end button to reject the incoming call
Redial last number* Double tap the answer/ end button when the speakerphone is on and not used
Mute Long press the volume down button. A sound will indicate that the speakerphone is on mute every 10 seconds until the speakerphone is un-muted
Un-mute Long press the volume down button. A short sound will indicate that your speakerphone is un-muted
Adjust volume Tap volume + or volume- to adjust the volume level. A short sound will indicate when the volume level is at its highest or lowest limit
Hold active call Press the answer/end button
Transfer an active call from your phone to Jabra DRIVE Tap the answer/end button or press it for a long time
Three way call (Another incoming call)
Release active-accept incoming call Tap the answer/end button
Hold active/accept incoming Press the answer/end button
Reject incoming call Double tap the answer/end button
Three way call (The other call is on hold)
Release active/activate held Tap the answer/end button
Hold active and activate held call Press the answer/end button
Release held call Double tap the answer/end button

HOW TO HANDLE CALLS FROM TWO MOBILE PHONES

Function How to perform
Calls on two phones (One active call – the other phone is ringing)
Release active/accept incoming call Tap the answer/end button
Reject incoming call Double tap the answer/end button
Hold active/accept incoming*** Press the answer/end button

***Active calls on the two connected phones – other phone’s call is on hold

Function How to perform
Release active/activate held Tap the answer/end button
Hold active and activate held call Press the answer/end button
Release held call Double tap the answer/end button

TROUBLESHOOTING & FAQ

I hear crackling noises

Bluetooth is a radio technology, which means it is sensitive to objects between the speakerphone and the connected device. It is designed for the speakerphone and the connected device to be used within 33 feet (10 meters) of each other, with no major objects in the way (walls, etc.).

I cannot hear anything in my speakerphone

  • Increase the volume in the
  • Ensure that the speakerphone is paired to a device that is
  • Make sure your phone is connected to the speakerphone by tapping the answer/end

I am having pairing problems

  • You may have deleted your speakerphone pairing connection in your mobile Follow the pairing instructions.

I want to reset the pairing list in my speakerphone

The speakerphone registers a list of up to 7 mobile phones. To remove the list:

  1. Put your Jabra DRIVE in the pairing mode by long press on the answer/end button;
  2. The press Volume down button while holding your finger on the answer/end

A beep and a purple flash of the status light indicate the list was removed from the speakerphone memory. The next time you power on, the speakerphone will go into pairing mode as the first time you powered your new Jabra DRIVE on.

Will the Jabra DRIVE work with other Bluetooth equipment?

  • The Jabra DRIVE is designed to work with Bluetooth mobile It can also work with other Bluetooth devices that are compliant with Bluetooth version 1.1 or higher and support a headset, hands-free and/or advance audio distribution profile.

I cannot use Reject call, call on hold, Redial or voice dialing

  • These features are dependent on the ability of your phone to support a hands-free profile. Even if the hands free profile is implemented reject call, call hold and voice dialing are optional features which are not supported by all Please consult your device manual for details.

Please note that some features can only be operated from the primary device e.g. voice dial using Jabra DRIVE with 2 mobile phones.

NEED MORE HELP?

  1. Web: jabra.com (for the latest support info and online User Manuals)

2.   E-mail:

Deutsch              [email protected]

English               [email protected]

Español              [email protected]

Français             [email protected]

Italiano              [email protected]
Nederlands     [email protected]
Polska           [email protected]
Scandinavian  [email protected]
Россия      [email protected]
Information:  [email protected]

3.   Phone:

Belgique/Belgie 00800 722 52272
Danmark 70 25 22 72
Deutschland 0800 1826756
Die Schweiz 00800 722 52272
España 900 984572
France 0800 900325
Italia 800 786532
Luxembourg 00800 722 52272
Nederland 0800 0223039
Norge 800 61272
Österreich 00800 722 52272
Polska 0801 800 550
Portugal 00800 722 52272
Suomi 00800 722 52272
Sverige 020792522
United Kingdom 0800 0327026
Россия +7 916 246 69 00
International 00800 722 52272

 TAKING CARE OF YOUR JABRA DRIVE

  • Always store the Jabra DRIVE with the power off and safely
  • Avoid storage at extreme temperatures (above 45°C/113°F
    – including direct sunlight – or below -10°C/14°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance.
  • Do not expose the Jabra DRIVE to rain or other

GLOSSARY

  1. Bluetooth is a radio technology that connects devices, such as mobile phones and headsets, without wires or cords over a short distance approx. 33 feet (10 meters). Get more information at www.bluetooth.com.
  1. Bluetooth profiles are the different ways that Bluetooth devices communicate with other devices. Bluetooth phones support the headset profile, the hands-free profile or both. In order to support a certain profile, a phone manufacturer must implement certain mandatory features within the phone’s
  2. Pairing creates a unique and encrypted link between two Bluetooth devices and lets them communicate with each Bluetooth devices will not work if the devices have not been paired.
  3. Passkey or PIN is a code that you enter on your mobile phone to pair it with your Jabra This makes your phone and the Jabra DRIVE recognize each other and automatically work together. The passkey for all Jabra products is 0000.
  4. Standby mode is when the Jabra DRIVE is passively waiting for a call. When you ‘end’ a call on your mobile phone, the speakerphone goes into standby

Jabra Drive User Manual - Disposal iconDispose of the product according to local standards and regulations. www.jabra.com/weee

 

Jabra Logo Jabra Drive User Manual - GN Netcom© 2011 Gn netcom US, Inc. All rights reserved. Jabra® is a registered trademark of Gn netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Gn netcom A/S is under license. (Design and specifications subject to change without notice).

© 2011 Gn netcom A/S. All rights reserved. Jabra® is a registered trademark of Gn netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Gn netcom A/S is under license. (Design and specifications subject to change without notice).

MADE In CHINA
TYPE: HFS004
FCC ID: XXXXXXX
IC: XXXXXXXX

Jabra Drive User Manual - Certified icon

www.jabra.com

Leave a comment

Your email address will not be published.