SHADA Plug-in Sensor – PIR 120° IP20 – White User Manual

SHADA Plug-in Sensor - PIR 120° IP20 - White User Manual

Installation

SHADA Plug-in Sensor - PIR 120° IP20 - White User Manual - Installation SHADA Plug-in Sensor - PIR 120° IP20 - White User Manual - Installation

⚠ Safety warning!

Ensure that you have fully read and understood the instructions in this document before you install or use the product following the installation/wire diagram (when applicable\ Keep this document for future reference and only use the product as described in this document Any other use of the product than described in this manual may damage the product or cause injury to the user (e.g. due to a short circuit fire or electric shock). Disconnect the product from the power source when problems occur. Do not drop the product and avoid bumping. Do not use the product if a part is damaged or defective. Replace a damaged defective product immediately. When a non-standard consumer (power)installation is required this should be performed by a qualified technician to reduce the risk of an electric shock Make sure the product is sufficiently ventilated during use. Never cover an electrical (LED) device during usage since it can generate heat causing damage. Besides LED can be extremely bright and may cause serious eye damage so do not stare at it directly. When a product is meant for indoor and/or outdoor use only, this will be mentioned on the product/parts or in the manual. Keep the product out of reach of children or animals.

🧹 Cleaning and Maintenance warning!

Do not use cleaning solvents or abrasives. Do not clean the inside of the device. Do not attempt to repair the device. Replace the device when it does not operate correctly. Clean the outside of the device using a soft, damp cloth (Do not use a microfiber cloth)

ℹ Support:

If you need further help or have comments or suggestions please visit: www.shada.nl/nl/contact

SHADA Plug-in Sensor - PIR 120° IP20 - White User Manual - Warning Risk of Electric shock iconCaution! Risk of electric shock.
SHADA Plug-in Sensor - PIR 120° IP20 - White User Manual - Class II iconClass II-A class II electric appliance is double insulated and designed so that It does not require a safety connection to electrical earth.
SHADA Plug-in Sensor - PIR 120° IP20 - White User Manual - Non dimmable iconNon Dimmable.

SHADA Plug-in Sensor - PIR 120° IP20 - White User Manual - IP20 iconIP20-Protected from touch by fingers and objects greater than 12 millimeters.

SHADA Plug-in Sensor - PIR 120° IP20 - White User Manual - Disposal iconThe item should be disposed of separately froo1 household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal by separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land fill and minimize any potential negative impact on human health and the environment.

SHADA Plug-in Sensor - PIR 120° IP20 - White User Manual - CE mark iconThis product carries the CE mark, which confirms that this product meets EU safety health and environmental protection requirements.

⚠ Note Opening the device in any other way than described !till void the warranty

ℹ D.O.C | shada.nl/p/190116

SHADA Plug-in Sensor - PIR 120° IP20 - White User Manual - QR Code

SHADA Logo

SHADA Plug-in Sensor - PIR 120° IP20 - White User Manual - Certified icon

Molenmakershoek 28,NL-7328 JK APELDOORN- The Netherlands • www.shada.nl

Download PDF

SHADA Plug-in Sensor – PIR 120° IP20 – White User Manual

Leave a comment

Your email address will not be published.