Star Hanger 325 Zero Side Mount ADA and Soffit User Manual
Required Tools; 325 Zero Side Mount, 330 Alignment Pins, 913 Pilot Drill 5MM Center Point Drill & Stop.
Install both your wall rails with heavy duty self-tapping screws being sure to hit the steel studs. Lock each shop built gusset plate into position and secure each gusset plate with angle brackets.
Install the 452 “L” Brackets onto gusset plates.
Install the 330 Zero Alignment Pins to help mark the locations for the 334 Mounting Screws.
Press each panel into the Alignment Pins to mark the 5/16″ Mounting Screw locations.
Completed ADA unit can be installed in about 30 minutes.
The 325 Zero Side Mounts can be used to install wall cabinet soffits quickly.
Install wall gussets above the wall cabinets with the 325 Zero Side Mounts pre-installed. The gussets can be installed by simply sitting them in beads of panel adhesive and allowed to dry overnight.
Install the 330 Zero Alignment Pins and press the panels firmly into place to mark the 334 Mounting Screw locations.
Push the soffit firmly against the 330 Zero Alignment Pins to mark the 334 Mounting Screw locations.
The completed soffits above the cabinets can be removed for later access.