FeiDu FM40N true diversity wireless microphone User Manual

FeiDu FM40N true diversity wireless
microphone User Manual

FangOa Science Park, Ningjin County, XingTai city, HeBei province, China.

0319-5518999 +86-319-5518999
[email protected]
www.fei-du.com

TRANSMITTER STRUCTURE INSTRUCTION

1. Antenna
2. : Press the button for 3 seconds to start the device, click to set the volume and frequency.
3. MIC/LINE IN : external Mic or audio Input
4. IN DC 5V: power input for charging
5. Charging Icon: Red light when charging and green light when fully charged
6. Microphone mute: microphone mute indicator (off lights Indicates mute )
7. “+-“: ( click button to set the volume mode ) click +- to adjust the db, (click  button to set the frequency mode) click + — to adjust the frequency. The device will be mute when users press the  button and – button at the same time Press +- at the same time to switch frequency and channel.
8. Cold shoe and Clip: It can be clipped on clothes or installed on hot shoe. Magnet on the back can be attached to metal
9. Built- in microphone FeiDu FM40N true diversity wireless microphone
10. Display screen

RECEIVER STRUCTURE INSTRUCTION

1. Antenna
2. : Press the button for 3 seconds to start the device, click to set the volume and frequency. FeiDu FM40N true diversity wireless microphone
3. Output: audio output
4. microphone symbol: TRS out, Real-time monitoring
5. IN DC 5V: power input for charging
6. Charging Icon: Red light when charging and green light when fully charged
7. Link symbol: link signal display on transmitter/receiver FeiDu FM40N true diversity wireless microphone
8. “+-“: (click button to set the volume mode) click +- to adjust the db, (click  button to set the frequency mode) click + — to adjust the frequency.
   The device will be mute when users press the  button and – button at the same time Press +- at the same time to switch frequency end channel.
9. Cold shoe and Clip: It can be clipped on clothes or installed on hot shoe. Magnet on the back can be attached to metal.

FUNCTION INSTRUCTION ON TRANSMITTER SCREEN DISPLAY

FUNCTION INSTRUCTION ON RECEIVER SCREEN DISPLAY

INSTALLING STEPS

1. Connect 3.5mm wire with camera. connect the microphone if monitoring is needed.
2. Press the power button 3 seconds to st art. FeiDu FM40N true diversity wireless microphone
3. After starting, check whether the frequencies of transmitter and receiver are the same. If yes, It can operate normally.
   If not, please adjust the frequency to be the same.
4. Suggested parameters: the sensitivity of the transmitter is 4, and the volume of the receiver is 15

PRODUCT PARAMETERS

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FeiDu FM40N true diversity wireless microphone

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help. RF exposure compliance statement: This device has been evaluated to meet the general RF exposure requirement FeiDu FM40N true diversity wireless microphone