Arlo Essential Spotlight Camera – 3 Pack User Manual

Arlo Essential Spotlight Camera – 3 Pack User Manual

Essential Series
Wire-Free Camera
User Manual
• Essential Camera
• Essential Spotlight Camera
• Essential XL Spotlight Camera

Contents
1.

Get to Know Your Essential Series Camera

5

Get the Arlo app…………………………………………………………………………………………………………………… 5
Meet your Essential Camera………………………………………………………………………………………………… 6
Meet your Essential Spotlight Camera………………………………………………………………………………… 7
Meet your Essential XL Spotlight Camera……………………………………………………………………………. 8
Do more with Arlo………………………………………………………………………………………………………………… 9

2.

Get Started

10

Use the Arlo app for installation and setup……………………………………………………………………….. 10
Charge your camera indoors……………………………………………………………………………………………… 10
Use the sync button to wake the camera………………………………………………………………………….. 11
Check the LED……………………………………………………………………………………………………………………. 12
Find a good location for your camera……………………………………………………………………………….. 12
Wall mount your camera……………………………………………………………………………………………………. 12
Connect an optional Essential Solar Panel (sold separately)……………………………………………. 13
Test motion detection……………………………………………………………………………………………………….. 13
Position your camera to detect motion in specific areas………………………………………………….. 14
Arm your camera to detect motion……………………………………………………………………………………. 15

3.

WiFi Setup and Connections

16

WiFi connection options……………………………………………………………………………………………………. 16
Tips for optimal WiFi performance……………………………………………………………………………………. 16
Connect your mobile device to a 2.4 GHz WiFi network during setup ������������������������������������ 17
Move your camera’s WiFi connection to a SmartHub or base station ������������������������������������ 18
Move your camera’s WiFi connection to a direct router connection �������������������������������������� 19

4.

Use Your Essential Series Camera

20

View your camera feeds…………………………………………………………………………………………………….. 21
Record clips from live video………………………………………………………………………………………………. 21
Take a snapshot from live video………………………………………………………………………………………… 21
Turn the camera spotlight on and off manually………………………………………………………………… 22
Motion detection activity zones…………………………………………………………………………………………. 23
2-Way Audio……………………………………………………………………………………………………………………….. 24

2

Arlo Essential Series Wire-Free Camera

Turn the camera’s siren on and off manually…………………………………………………………………….. 25
View recordings and snapshots…………………………………………………………………………………………. 25

5.

Modes, Rules, and Alerts

28

Arm or disarm all your Arlo devices…………………………………………………………………………………… 28
Modes…………………………………………………………………………………………………………………………………. 28
Select a mode…………………………………………………………………………………………………………………….. 29
Mute Notifications……………………………………………………………………………………………………………… 29
Rules for modes…………………………………………………………………………………………………………………. 30
Change motion sensitivity…………………………………………………………………………………………………. 30
Control whether the spotlight turns on when motion is detected ������������������������������������������ 30
Use a rule to activate the camera’s siren……………………………………………………………………………. 31
Add a rule with an optional base station siren trigger………………………………………………………. 31
Manage alerts…………………………………………………………………………………………………………………….. 32
Schedule when your camera is armed………………………………………………………………………………. 32
Set up Arlo Geofencing………………………………………………………………………………………………………. 33
Geofencing with multiple mobile devices…………………………………………………………………………. 35
Custom modes…………………………………………………………………………………………………………………… 37

6.

Change Your Settings

39

Two-step verification…………………………………………………………………………………………………………. 39
Use face or fingerprint authentication………………………………………………………………………………. 40
Customize your profile………………………………………………………………………………………………………. 41
Change your Arlo password……………………………………………………………………………………………….. 42
Reset a forgotten password……………………………………………………………………………………………….. 42
Grant access to friends………………………………………………………………………………………………………. 43
Change the time zone………………………………………………………………………………………………………… 45
Camera settings…………………………………………………………………………………………………………………. 45
Video Settings…………………………………………………………………………………………………………………….. 46
Adjust the audio settings……………………………………………………………………………………………………. 47
Adjust the flicker setting…………………………………………………………………………………………………….. 47
Restart the camera from the Arlo app……………………………………………………………………………….. 48
View device information…………………………………………………………………………………………………….. 48
Remove a device from your account…………………………………………………………………………………. 48
Optional SmartHub and Base Station settings………………………………………………………………….. 48

Contents

3

User Manual

Arlo Essential Series Wire-Free Camera

7.

SmartHub SD Card Storage

51

Insert a microSD card………………………………………………………………………………………………………… 51
View the SD card status……………………………………………………………………………………………………… 52
View available SD card storage………………………………………………………………………………………….. 52
Turn SD card recording off and on…………………………………………………………………………………….. 52
Change the SD card overwrite setting……………………………………………………………………………….. 52
Format a microSD card………………………………………………………………………………………………………. 53
Safely eject an SD card………………………………………………………………………………………………………. 53
View videos on a microSD card………………………………………………………………………………………….. 53

8.

SmartHub or Base Station USB Storage

55

View the USB storage device status…………………………………………………………………………………… 56
View available USB device storage…………………………………………………………………………………….. 56
Turn USB recording off and on………………………………………………………………………………………….. 56
Change the USB device overwrite setting…………………………………………………………………………. 57
Format a USB device………………………………………………………………………………………………………….. 57
Safely eject a USB storage device………………………………………………………………………………………. 57
View videos on a USB device……………………………………………………………………………………………… 58

9.

Arlo Connect

59

Use Arlo with Amazon Alexa………………………………………………………………………………………………. 59
Add your camera to the Google Assistant app………………………………………………………………….. 60
Use Arlo with IFTTT……………………………………………………………………………………………………………. 61

10. Troubleshooting

62

Scan a QR code during setup…………………………………………………………………………………………….. 62
Arlo doesn’t discover your camera during setup………………………………………………………………. 63
Troubleshoot Arlo Geofencing…………………………………………………………………………………………… 64
Can’t see video streams in a browser………………………………………………………………………………… 64
WiFi signal interference……………………………………………………………………………………………………… 64
Use the sync button to reset the camera…………………………………………………………………………… 67

Contents

4

User Manual

1. Get to Know Your Essential Series
Camera
There are three Arlo Essential wire-free cameras: the Essential Camera, Essential Spotlight
Camera, and Essential XL Spotlight Camera.

Arlo Essential Camera (VMC2020). Mount your camera indoors or outdoors with flexibility
and ease of use.

Arlo Essential Spotlight Camera (VMC2030). Capture clear details in full high definition,
and see in color at night with the integrated spotlight.

Arlo Essential XL Spotlight Camera (VMC2032). Take advantage of extra battery length,
along with all the same features as the VMC2030 Essential Spotlight Camera.

Get the Arlo app
Download the Arlo app. The Arlo app lets you create an Arlo account in the cloud and set up
and manage all your Arlo devices.

Note: If you already use the Arlo app, make sure that you’re using the latest version. To find
out if an update is available, go to the app store and search for Arlo.

5

Arlo Essential Series Wire-Free Camera

Meet your Essential Camera
Your camera includes an integrated battery that can’t be removed.

Front view
Microphone

Ambient
light sensor

Camera LED

Camera lens

Weather
resistant

Speaker

Rear view

Screw mount hole

Bottom view
Sync button
Charging port
cover

Get to Know Your Essential Series Camera

6

User Manual

Arlo Essential Series Wire-Free Camera

Meet your Essential Spotlight Camera
Your camera includes an integrated battery that can’t be removed.

Front view
Spotlight

Microphone

Ambient
light sensor

Camera LED

Camera lens

Weather
resistant

Speaker

Rear view

Screw mount hole

Bottom view
Sync button
Charging port
cover

Get to Know Your Essential Series Camera

7

User Manual

Arlo Essential Series Wire-Free Camera

Meet your Essential XL Spotlight Camera
Your camera includes an integrated battery that can’t be removed.

Front view
Spotlight

Microphone

Ambient
light sensor

Camera LED

Camera lens

Weather
resistant

Speaker

Rear View

Screw mount hole

Bottom view
Sync button
Charging port
cover

Screw mount hole

Get to Know Your Essential Series Camera

8

User Manual

Arlo Essential Series Wire-Free Camera

Features

Capture clear details in full high-definition. Record video in 1080p for a clear picture.

Designed to withstand heat, cold, rain, or sun. Camera can be used indoors or out.

Receive alerts when motion is detected. Notifications are sent directly to your phone.

See visitors at night. All three camera models have infrared night vision. The Essential
Spotlight Camera and the Essential XL Spotlight Camera include an integrated spotlight
that lets you see color night vision.

Clearly hear and speak with visitors. Tap a button in the app to use 2-Way Audio.

Easily recharge your camera. Connect the included power cable to the camera.

Use the built-in siren to deter unwanted guests. Siren can be triggered remotely or
automatically during an event.

Keep an eye on what matters with a wide field of view. 130° viewing angle lets you see
more.

Security in the palm of your hand. Watch live streams or recorded video from your
smartphone or tablet using the Arlo app.

Take action faster. Get notifications when your camera spots people, packages, vehicles,
or animals with Arlo Secure1.

Do more with Arlo
You can add these options, which are sold separately:

Add more Arlo cameras and devices. Cover more areas in and around your home by
adding cameras, security lights, and more.

Pair your camera to an optional Arlo SmartHub or base station (VMB5000, VMB4540,
VMB4500, or VMB4000, sold separately). An Arlo SmartHub securely connects your camera
to the internet via your home router, provides long range connectivity, and added battery
life.

Add the Arlo Essential Solar Panel (VM3600). Connect a solar panel to your camera and
harvest power from the sun to keep your camera battery charged. See Connect an optional
Essential Solar Panel (sold separately) on page 13.

Upgrade your Arlo subscription. For more information, visit What are the available Arlo
subscription plans and how much cloud recording is available?

1 Arlo Secure service is not available in certain countries. See www.arlo.com/ArloSmart for details.
Get to Know Your Essential Series Camera

9

User Manual

2. Get Started
Use the Arlo app for installation and setup
The free Arlo app helps you complete setup and guides you through the installation process.
1. Open the Arlo app and connect to your WiFi network.
If you don’t have the app, you can download it and create your Arlo
account.
Once you set up your Arlo account, you can access it from the Arlo app
on a smartphone or tablet, or from a computer using a web browser.
If you’re using a computer, enter https://my.arlo.com/#/login in the
address bar of the browser.
2. Open the Arlo app and connect to your WiFi network. Then select Add Device and add
your camera.

Charge your camera indoors
A micro USB charging cable came in the box with your camera. This cable is for indoor use
only. The camera includes an integrated battery that can’t be removed.
To charge your camera:
1. Open the cover for the micro USB charging port on your camera.

10

Arlo Essential Series Wire-Free Camera

2. Connect the micro USB charging cable to your camera.

3. Connect the other end of the charging cable to a USB charging source such as a USB
charging port or an AC power adapter.
The battery charges automatically. The camera LED lights solid blue when the camera is
fully charged.

Use the sync button to wake the camera
The button on the bottom of your camera is the sync button. You can use the sync button for
different purposes, depending on whether your camera is shut down or in normal operating
mode.

Sync button
Charging port
cover

When you unbox your camera, it is shut down to reduce battery usage before installation. We
recommend that you follow the instructions in the Arlo app to wake and install the camera.
When the camera is shut down, pressing the sync button does the following:

Press and hold the sync button for 1–2 seconds. The camera wakes and the LED flashes
blue for two minutes. Follow the instructions in the Arlo app to add your camera to your
Arlo account.

Quick press. No change. The camera remains shut down.

If the LED doesn’t flash, no matter how long you press the sync button, the camera battery is
likely at 0% charge. Recharge your camera and try pressing the sync button again.

Get Started

11

User Manual

Arlo Essential Series Wire-Free Camera

Check the LED
The LED on the camera lights when the camera is powered on. The LED changes color and
blinks depending on the camera’s charge level and to indicate the status of activities such as
pairing the camera and updating the camera firmware.

Slow blinking blue. The camera is in the process of pairing to a WiFi network.

Fast blinking blue. The camera paired with a WiFi network.

Blinking amber. The camera is out of range, a connection error occurred during pairing, or
the camera battery charge is low (15% or less).

Alternating blue and amber. A firmware update is in process.

Find a good location for your camera
Select a location for your camera with a clear vantage point to fully optimize the wide field
of view. For the best experience, choose a location with a strong WiFi signal. You can check
the WiFi signal strength in the Arlo app. For information about WiFi connections, see WiFi
connection options on page 16.

Wall mount your camera
Your camera comes with a mount and a screw kit.
1. Place the mount and secure it with screws.
If you’re mounting the camera on drywall, use the drywall anchors we provide.

2. Attach the camera to the mount.

Note: The Essential XL Spotlight Camera has two mounting holes. One is located on the
rear, and the other is on the bottom. You can use either for wall mounting.
Get Started

12

User Manual

Arlo Essential Series Wire-Free Camera

3. Tilt and swivel to adjust the camera angle.

Connect an optional Essential Solar Panel (sold
separately)
You can use the Essential Solar Panel (VM3600) to harvest power from the sun to keep your
camera battery charged.

Follow the instructions that come with your solar panel to:
1. Install the solar panel mount near your camera.
2. Attach your solar panel to the mount.
3. Connect your solar panel to your camera.

Test motion detection
You can use the motion detection test to find the right motion sensitivity setting for your
camera.
1. Open the Arlo app.
2. Tap Settings > My Devices.

Get Started

13

User Manual

Arlo Essential Series Wire-Free Camera

3. Select your camera.
4. Tap Device Utilities > Motion Detection Test.
5. Move in front of the camera.
During this test, the LED blinks amber when motion is detected.
6. Move the slider to adjust the motion sensitivity level as needed.
This motion sensitivity setting is used during the motion detection test. It is not
automatically applied to the camera rules used by modes to arm your camera. When you
are satisfied with a particular motion sensitivity level in the test, note the setting so that
you can add it to your rules.
7. Edit the rule for your camera to enter the motion sensitivity level that you want to use.
See Change motion sensitivity on page 30.

Position your camera to detect motion in
specific areas
You can mount and aim your camera in different ways to optimize the camera’s ability to
detect motion in specific areas. The lower two-thirds of the camera’s field of view is the
motion-sensitive part of the image. Aim the camera so that any motion you wish to detect
appears within this part of the image.
If you want to monitor motion closer to the camera,
such as visitors to your front door, mount the
camera at least 6.5 feet (1.9 meters) high and aim it
so that visitors appear in the lower two-thirds of the
image. This angle works well to avoid motion alerts
for movement in the top third of the image, such as
vehicles driving by.
To monitor motion occurring farther away, such as
children playing on a lawn, aim the camera higher
to frame the area within the lower two-thirds of the
image.
It’s best to position the camera so that motion is
moving from side-to-side across its field of view
rather than directly toward or away from the
camera. Also, though the camera can detect motion
up to 23 feet (7 meters) away, the best area for
motion detection is 5 to 20 feet (1.5 to 6 meters)
from the camera position.

Get Started

14

User Manual

Arlo Essential Series Wire-Free Camera

Use camera positioning to aim your camera
Camera positioning is available only when the camera is not streaming, recording motion, or
using the Motion Detection test. During camera positioning, the camera streams video as fast
as possible, without buffering. You can aim your camera while watching on your smartphone
and making near real-time adjustments to the camera position. This means that you might
see lower-quality video while you are positioning your camera.
To position your camera:
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select the camera.
4. Tap Device Utilities > Camera Positioning.
The camera starts streaming video. The signal strength bar indicates the WiFi signal that
your camera is receiving at its current location.

Arm your camera to detect motion
When your camera is armed, it detects motion. You can control when your camera is armed
using these features:

Arm or disarm all your Arlo cameras and devices. See Arm or disarm all your Arlo devices on
page 28.

Select a mode such as Armed, Disarmed, Schedule, or Geofencing. See Select a mode on
page 29.

Get Started

15

User Manual

3. WiFi Setup and Connections
When you install and set up your camera, the Arlo app guides you through the process of
connecting the camera to your router’s 2.4 GHz WiFi network or to an optional Arlo SmartHub
or base station.

WiFi connection options
When you install your camera you can connect it directly to your router’s 2.4 GHz WiFi band, or
you can connect the camera with WiFi to an Arlo SmartHub VMB5000 or VMB4540, or an Arlo
base station VMB4500 or VMB4000.
An Arlo SmartHub or base station isn’t included in the package with your camera. They are
sold separately. Using your camera with a SmartHub or base station gives you access to these
additional features:

Use local storage on an SD card in a VMB5000 SmartHub or on a USB storage device
connected to the SmartHub VMB4540 or base station VMB4500 or VMB4000.

Use direct storage access for SmartHubs VMB5000 and VMB4540.

After you install and set up your camera, you can move its WiFi connection from your router
to a SmartHub or base station. You can also move your camera’s WiFi connection from a
SmartHub or base station and connect it directly to your router’s 2.4 GHz WiFi band. To do
this, you must remove the device from your account and reinstall through the Arlo app,
selecting the appropriate option to move back and forth.

Tips for optimal WiFi performance
The distance between WiFi devices can affect the WiFi signal:

Maximum recommended distance. We recommend that you place your WiFi router within
300 feet (90 meters) of the camera. The maximum line-of-sight range of 300 feet is reduced
by each wall, ceiling, or other major obstruction between the camera and the router.

Minimum recommended distance. To reduce WiFi interference, allow at least 6½ feet (2
meters) between your camera and any Arlo cameras that you install.

16

Arlo Essential Series Wire-Free Camera

These materials can reduce WiFi signal strength if they are located between WiFi devices:

Unusually thick walls and ceilings

Brick

Concrete

Stone

Ceramic

Glass, especially mirrors

Metal

Large quantities of water, such as the water in a fish tank or water heater

Connect your mobile device to a 2.4 GHz WiFi
network during setup
If you’re connecting your camera directly to your router’s WiFi network, it’s important to
understand that your mobile device must connect to the same WiFi network as the camera
during setup.
Your camera can only connect to a 2.4 GHz WiFi network. Many routers broadcast WiFi
networks in both 2.4 GHz and 5 GHz bands, so your phone might connect to the 5 GHz WiFi
band. During setup, connect your phone to your 2.4 GHz WiFi network, then connect your
camera to that same 2.4 GHz WiFi network.

Find your 2.4 GHz WiFi network name and password
Your phone might connect to your 5 GHz WiFi network most of the time. If you’re not sure
about how to find the 2.4 GHz WiFi network:

Look on your WiFi router label.
Many routers have a label that shows the WiFi network name, which is also called an SSID.
Your 2.4 GHz network name might have a 2, 2.4, or 2G at the end. Your 5 GHz network
name might have a 5 or 5G at the end. If you changed your WiFi settings, then check the
place where you saved your custom settings.

If your WiFi network name or SSID doesn’t indicate whether it’s 2.4 GHz or 5 GHz, ask your
Internet service provider (ISP) or the person who set up your WiFi router.

If you have a mesh WiFi network, it uses only one WiFi network name for both WiFi bands.
The camera finds and connects to the 2.4 GHz WiFi band. As long as you connect your
phone to the same mesh network, Arlo can discover the camera.

WiFi Setup and Connections

17

User Manual

Arlo Essential Series Wire-Free Camera

Connect your iOS (Apple) device to a 2.4 GHz network
1. Unlock your device and tap Settings.
2. Tap Wi-Fi, near the top of the list of Settings options.
3. Turn on WiFi by tapping the switch next to Wi-Fi at the top.
Note: WiFi is activated when the switch is green.
4. Select a 2.4 GHz WiFi network.
This is commonly indicated by a 2, 2.4, or 2G at the end of the network name.
5. If prompted, enter the password for the network.
When you’re connected to the WiFi network, a blue check mark appears to the left of the
network name.

Connect your Android device to a 2.4 GHz network
1. Unlock your device and tap Settings.
2. Tap Network & Internet > Wi-Fi.
3. Turn on WiFi by tapping Use WiFi at the top.
4. Select a 2.4 GHz WiFi network.
This is commonly indicated by a 2, 2.4, or 2G at the end of the network name.
5. If prompted, enter the password for the network.
When you’re connected to the WiFi network, the word Connected appears under the
network name.

Move your camera’s WiFi connection to a
SmartHub or base station
You can change your camera’s WiFi connection from your router to an Arlo SmartHub
VMB5000 or VMB4540, or an Arlo base station VMB4500 or VMB4000.
To add a SmartHub or base station and connect your camera:
1. Open the Arlo app.
2. Add the SmartHub or base station to the same Arlo account that your camera was
originally connected to.
If you’re using a trial Arlo subscription associated with this account, doing this keeps the
trial subscription active so you don’t lose it.
WiFi Setup and Connections

18

User Manual

Arlo Essential Series Wire-Free Camera

3. Follow the Arlo app instructions to set up your SmartHub or base station and connect it to
the Internet.
4. Tap Settings > My Devices.
5. Select your camera.
6. Scroll down and tap Remove Device.
Your device is reset and removed from your account.
7. From My Devices, tap Add New Device > Cameras > Essential.
8. Follow the Arlo app instructions to add the camera.
9. When the Arlo app detects your SmartHub or base station, follow the instructions to
connect your camera to your SmartHub or base station.

Move your camera’s WiFi connection to a direct
router connection
You can change your camera’s WiFi connection from a VMB5000, VMB4540, VMB4500, or
VMB4000 SmartHub or base station, and connect the camera directly to your router’s 2.4 GHz
WiFi network.
To move your camera’s WiFi connection directly to your router:
1. Open the Arlo app and log into the same Arlo account that your camera is connected to.
If you’re using a trial Arlo subscription associated with this account, doing this keeps the
trial subscription active so you don’t lose it.
2. Make sure that your mobile device is connected to your router’s 2.4 GHz WiFi network.
For more information, see Connect your mobile device to a 2.4 GHz WiFi network during
setup on page 17.
3. Tap Settings > My Devices.
4. Select your camera.
5. Scroll down and tap Remove Device.
Your device is reset and removed from your account.
6. Tap Devices, and then tap Add New Device.
7. Follow the Arlo app instructions to connect your camera directly to a 2.4 GHz WiFi
network.
WiFi Setup and Connections

19

User Manual

4. Use Your Essential Series Camera
When you open the Arlo app, the Devices page displays your camera feeds.

Tap to turn the siren
on and off manually
This camera is armed
and detecting motion

Number of new recordings

Tap Play
to stream
the camera feed

Tap to view device settings
for the camera

This camera is disarmed
Tap a button to go
to Devices, Library,
Modes, or Settings

Camera Located below each camera
icon
feed

Camera Tap the camera feed to display
feed icon these icons

Battery charge

Play/Stop

WiFi signal from your WiFi router,
SmartHub, or base station

Mute the audio

Motion detection is on

Talk and Listen

View or change the camera settings

Record video manually
(requires cloud storage)
Take a snapshot
(requires cloud storage)
(Essential Spotlight Camera and Essential
Spotlight XL Camera) Turn the camera
spotlight on and off.

20

Arlo Essential Series Wire-Free Camera

View your camera feeds
1. Open the Arlo app.
2. Tap Play
on the camera feed.
The camera feed updates and camera feed icons display.
3. To stop viewing and listening to the live feed, tap Stop

.

Pan and zoom video
You can pan and zoom your video feed.
1. Open the Arlo app.
on the camera feed.
2. Tap Play
On a mobile device, use the pinch gesture to zoom, and touch and drag to move around
the zoomed-in frame.
On a computer, double-click to zoom. Left-click and hold and drag to move around the
zoomed-in frame.
After zooming in, the image stops and buffers for about five seconds to improve the quality
of video. When the buffering stops, your zoomed-in video renders in high quality.

Record clips from live video
1. Open the Arlo app.
2. Tap the camera feed image.
3. Tap Record
to begin recording.
This icon turns red to indicate that you are recording the live feed.
4. To stop recording, tap Record

again.

Take a snapshot from live video
1. Open the Arlo app.
2. Tap the camera feed image.
3. Tap Snapshot
.
The snapshot is saved in your library.

Use Your Essential Series Camera

21

User Manual

Arlo Essential Series Wire-Free Camera

Turn the camera spotlight on and off manually
The Essential Spotlight Camera and Essential XL Spotlight Camera include an integrated
spotlight. When your camera is armed and detects motion at night the spotlight turns on
automatically. You can also adjust the spotlight behavior and turn it on and off.
To turn the spotlight on and off from the camera feed:
1. Open the Arlo app.
2. Tap the camera feed.
3. Tap Spotlight .
4. To adjust the brightness, tap and hold the icon and adjust the slider.
5. To turn off the spotlight, tap Spotlight .
For information about how to customize the spotlight settings, see Change the Low Light
settings for an Essential Spotlight Camera on page 46.

Customize your camera feed image
If you use more than one camera, you can change the order in which the camera feeds display
on the Devices page. You can also zoom or rotate the camera feed image 180 degrees.

Change the camera order
1. Open the Arlo app.
2. Tap Settings.
3. Under DEVICE SETTINGS, tap Device Order.
4. If you are using a smartphone or tablet, tap Edit at the top of the page.
A list icon displays.
5. Tap and hold the list icon and drag each device to the correct position on the list.
6. Tap Save.

Rotate a camera feed image 180 degrees
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select the camera.

Use Your Essential Series Camera

22

User Manual

Arlo Essential Series Wire-Free Camera

4. Tap Video Settings.
5. Rotate the image.
If you’re using an iOS device, tap Rotate Image 180°.
If you’re using an Android device, tap the slider to OFF and then rotate the image.

Motion detection activity zones
You can designate zones within the camera view where you want the camera to detect and
record motion. An Arlo Secure subscription is required.

Add an activity zone
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select the camera.
4. Under VIDEO, tap Activity Zones.
5. Tap +.
An activity zone box displays in the camera feed image.
6. Move the zone to the desired position in the camera feed image.
7. To reposition or resize the zone, tap and hold the zone and move it.
8. To customize the zone name, tap Edit
and enter a name.
If you’re using a web browser, click > next to the zone name.
9. Tap Save.

Change an activity zone
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select the camera.
4. Under VIDEO, tap Activity Zones.
5. Tap a zone to select it.
6. Move the zone to the desired position in the camera feed image.

Use Your Essential Series Camera

23

User Manual

Arlo Essential Series Wire-Free Camera

7. To reposition or resize the zone, tap and hold the zone and move it.
8. To customize the zone name, tap Edit
and enter a name.
If you’re using a web browser, click > next to the zone name.
9. Tap Save.

Delete an activity zone
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select the camera.
4. Under VIDEO, tap Activity Zones.
5. Tap a zone to select it.
6. Delete the device.
On an iOS device, slide the motion detection zone to the left and tap Delete.
On an Android device, slide the motion detection zone to the left.

2-Way Audio
The camera includes a microphone that supports 2-Way Audio.
1. Open the Arlo app.
2. Tap the camera feed image.
3. Tap the microphone icon .
4. The first time you use 2-Way Audio, allow Arlo to use your phone’s microphone.
5. Tap the microphone button.
2-Way Audio is activated.
A Tap to mute microphone button displays below the camera feed. This button toggles
mute on and off.
6. To turn off 2-Way Audio, tap the x on the upper-left corner of the page.

Use Your Essential Series Camera

24

User Manual

Arlo Essential Series Wire-Free Camera

Turn the camera’s siren on and off manually
Your camera includes a built-in siren. You can turn this siren on and off manually and you can
also set up a rule for an armed mode to specify when the siren turns on if your camera detects
motion. For information about using a rule in a mode, see Use a rule to activate the camera’s
siren on page 31.
To turn the siren on and off manually:
1. Open the Arlo app.
2. Tap Siren

on the upper right.

3. Tap Activate Siren.
If you have multiple cameras, you are prompted to select one.
4. Swipe the siren icon to the right.
The camera siren turns on.
5. To turn off the siren, tap the slider at the top of the Devices page.

View recordings and snapshots
Your camera stores recordings and snapshots in the library. You can use the filter and the
calender to find and view specific recordings.

Access cloud recordings
cameras record when they are in an armed mode and they detect motion or sound. Your Arlo
recordings are sent to your Arlo account in the cloud and stored in your library. Recordings are
encrypted with your user name and password.
You can access your recordings from the Arlo app on your mobile device or by using a web
browser to visit https://my.arlo.com/#/login. You can download recordings from the cloud and
save them.

Use the Library
You can use the library to find and view recordings based on the date.
1. Open the Arlo app.
2. Tap Library.
A green circle indicates the selected day. A green dot below the date indicates each day on
which a video clip was recorded.
Use Your Essential Series Camera

25

User Manual

Arlo Essential Series Wire-Free Camera

3. Tap a highlighted date.
Recordings from that date display below the calendar.

Use the filter
You can use the filter to find and view recordings based on criteria that you select.
1. Open the Arlo app.
2. Tap Library.
3. Tap Filter in the upper left corner of the page.
4. Tap the filtering criteria that you want to use.
5. Tap Done.

Turn off the filter
1. Open the Arlo app.
2. Tap Library.
3. Tap Filter in the upper left corner of the page.
4. Tap Reset.
5. Tap Done.

Download recordings
1. Open the Arlo app.
2. Tap Library.
3. Tap a recording.
4. Tap Download.
5. Tap OK to confirm.

Make a recording a favorite
1. Open the Arlo app.
2. Tap Library.
3. Tap a recording.
4. Tap Favorite.
Use Your Essential Series Camera

26

User Manual

Arlo Essential Series Wire-Free Camera

Share recordings
1. Open the Arlo app.
2. Tap Library.
3. Tap a recording.
4. Tap Share.
5. Share the file.

Donate recordings for research
You can donate video or snapshot files to Arlo to use for research and development of Arlo
products.
1. Open the Arlo app.
2. Tap Library.
3. Tap a recording.
4. Tap Donate.
5. Tap OK to confirm.

Delete recordings
1. Open the Arlo app.
2. Tap Library.
3. Tap a recording.
4. Tap Delete.
5. Tap OK to confirm.

Use Your Essential Series Camera

27

User Manual

5. Modes, Rules, and Alerts
You can arm or disarm your Arlo cameras and devices, and you can set up a schedule to
automatically arm each device. When your camera is armed, it detects motion. Modes and
rules let you tell your Arlo system what to do automatically in different situations. For
example, you can set your Arlo system to record a video when it detects motion and send you
an email alert.

Arm or disarm all your Arlo devices
You can arm or disarm all your Arlo devices simultaneously. Doing this deactivates other
modes, such as Schedule, Geofencing, and Custom modes for all your Arlo devices. To return
a device to another mode, select the device and then select a mode.
To arm or disarm all your Arlo devices:
1. Open the Arlo app.
2. Tap Modes.
3. Tap Arm All Devices or Disarm All Devices.

Modes
Arlo modes give you control over how your Arlo cameras respond to motion. For example, you
probably don’t want to receive an alert about motion in your yard in the daytime when you’re
gardening. You might want to turn on a different mode when you’re away on vacation. Modes
let you tell your cameras to respond differently at different times.
The Arlo app comes with these modes:
Armed. Detection is on for this camera.
Disarmed. Detection is off for this camera.
Schedule. Manage detection based on a schedule.
Geofencing. You can arm, disarm, or resume a schedule mode when you
arrive at, or leave, a given location based on your mobile device location.
28

Arlo Essential Series Wire-Free Camera

You can customize the Armed and Schedule modes and you can add new modes. You might
want to create a mode in which some cameras are active but others aren’t. For example, when
you’re sleeping, you might want to arm your outdoor camera and disarm your indoor camera.
You can create different modes for the same camera, but the camera can only use one mode
at a time.

Select a mode
You can select a mode or set modes to activate according to a schedule.
1. Open the Arlo app.
2. Tap Mode.
3. Select your camera or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.
4. Tap a mode to activate it.
The mode turns on immediately. The mode stays active until you change it.

Mute Notifications
Mute Notifications temporarily silences push notifications to your mobile device, while videos
continue to be recorded. This is great for a party when you don’t need to be notified of friends
in your backyard.
You can mute notifications from the Arlo app. If you use Arlo Secure, you can also activate
Mute Notifications directly from push notifications.
To mute notifications:
1. Open the Arlo app.
2. Tap Settings > Mute Notifications.
3. Select the length of time to mute notifications.
A message displays confirming that you are muting notifications. The Mute Notification
status shows the amount of remaining time until notifications resume.
To unmute notifications
1. Open the Arlo app.
2. Tap Settings > Mute Notifications > Unmute.
The Mute Notifications status changes to Off.

Modes, Rules, and Alerts

29

User Manual

Arlo Essential Series Wire-Free Camera

Rules for modes
Each mode uses one or more rules to control your Arlo system. You can set these options.

Trigger device. The trigger device is the camera that detects motion. You can adjust the
motion sensitivity to minimize false alarms.

Action device. The action device responds to motion detection on the trigger device. For
example, you might want your backyard camera or your driveway camera to trigger your
door camera to start recording video. You decide what action each camera takes when
motion is detected.

Notifications. When a trigger is detected, the Arlo can send you push notifications, email
alerts, or both. You can also send email alerts to friends, family members, pet sitters, or
anyone who might need to respond when a camera is triggered.

Change motion sensitivity
You can edit a rule to change the motion sensitivity level for your cameras.
1. Open the Arlo app.
2. Tap Mode.
3. Select your camera or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.
4. Tap Edit

next to the mode.

5. Tap Edit

next to the rule.

6. Under If the following, tap Edit

next to Motion is detected.

7. Move the slider to adjust the sensitivity level for motion detection for this camera.
If you used a mobile device to specify the settings, your settings are saved.
8. If you used a browser to specify the settings, click Save.

Control whether the spotlight turns on when
motion is detected
The Essential Spotlight Camera and Essential XL Spotlight Camera include an integrated
spotlight. This spotlight is set to automatically turn on when your camera detects motion at
night. The spotlight improves video quality and allows your camera to record video in color at

Modes, Rules, and Alerts

30

User Manual

Arlo Essential Series Wire-Free Camera

night rather than in traditional black and white. You can turn the spotlight on and off and you
can adjust the spotlight behavior and brightness.
Note: You can manually turn the spotlight on and off at any time from the camera feed by
tapping Spotlight . You can also use the Low Light settings to control whether the spotlight
comes on automatically when your camera detects motion at night. For information about
Low Light settings, see Change the Low Light settings for an Essential Spotlight Camera on
page 46.

Use a rule to activate the camera’s siren
1. Open the Arlo app.
2. Tap Mode.
3. Tap the camera or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.
4. Tap Edit

next to the mode.

5. Tap Edit

next to the rule.

6. Under Then do the following, tap Activate Siren and then tap Edit
The Siren Settings page displays.

.

7. Specify the Siren Duration and the Siren Loudness.

Add a rule with an optional base station siren
trigger
If you pair your camera to an optional Arlo Base Station with Siren VMB4000 or VMB4500 (sold
separately), you can create a rule to trigger the base station siren. For your camera’s built-in
siren, see Use a rule to activate the camera’s siren on page 31.
To add a rule with a base station siren trigger:
1. Open the Arlo app.
2. Tap Mode.
3. Tap the camera or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.

Modes, Rules, and Alerts

31

User Manual

Arlo Essential Series Wire-Free Camera

4. Tap Edit

next to the mode.

5. Under Rules, select the camera.
6. Select the Turn Siren ON check box.
7. Tap Sound Alarm.
8. Move the sliders to the desired level for Siren Duration and Siren Loudness.
9. Tap Edit

next to the rule.

10. Tap Done.
Note: This rule isn’t active until you activate the mode to which you added the siren trigger.

Manage alerts
Arlo can push notifications to your smartphone, send you email alerts, or do both. To receive
Arlo notifications on your phone, you must install the Arlo app on your phone.
Note: If you log out of the Arlo app on your smartphone or mobile device, you will stop
receiving push notifications.
1. Open the Arlo app.
2. Tap Mode.
3. Select your camera or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.
4. Tap Edit

next to the mode.

Note: The Disarmed mode does not send alerts.
5. Under Alert, tap Push Notification to turn alerts on and off for your mobile device.
6. Under Alert, tap Email Alerts to turn email notifications on and off.
7. To specify an email address, tap Edit

next to Email Alerts and enter the email address.

Schedule when your camera is armed
You can set a schedule to specify the days and times during the week when your camera is
set to respond to motion triggers. Schedules recur weekly. For example, the schedule for
Tuesday repeats every Tuesday as long as the schedule is turned on.
Modes, Rules, and Alerts

32

User Manual

Arlo Essential Series Wire-Free Camera

To schedule when your camera responds to motion triggers:
1. Open the Arlo app.
2. Tap Mode.
3. Select your camera or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.
4. Tap Schedule
5. Tap Edit

.

next to Schedule.

6. Tap Add or +.
7. Set the days and times for your new schedule.
Note: To add an overnight schedule such as 8:00 p.m. to 6:00 a.m., you need to add two
separate schedules. First, add 8:00 p.m. to 11:59 p.m., then add 12:00 a.m. to 6:00 a.m.
8. Tap Done.

Edit a schedule
1. Open the Arlo app.
2. Tap Mode.
3. Select your camera or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.
4. Tap Schedule
5. Tap Edit

.

next to Schedule.

6. Tap a green box.
7. Change the start and stop times and tap Save.

Set up Arlo Geofencing
Geofencing is a virtual fence around a location called a zone. You can use Arlo Geofencing to
arm, disarm, or resume schedule modes when your mobile device is in zone or out of zone.
To set up geofencing, you must use your mobile device and allow the Arlo app to use your
location.

Modes, Rules, and Alerts

33

User Manual

Arlo Essential Series Wire-Free Camera

Geofencing accuracy
For accuracy, geofencing uses a combination of GPS, cellular data, and WiFi data. The local
environment affects geofencing:

In urban environments, where the cell towers and WiFi routers are more dense, geofencing
accuracy can reach 100–200 meters.
Note: If you live in a skyscraper, geofencing might not work reliably due to GPS
inaccuracies. Using the Large radius setting might help.

In rural areas, where cell towers and WiFi routers are sparse, geofencing accuracy can
reach several hundred meters.

To improve geofencing accuracy, make sure that your mobile device meets these conditions:

WiFi is turned on.

GPS or location services are turned on.

Prepare your mobile device for geofencing
1. Enable GPS or location services so that Arlo can locate your device.
2. Enable WiFi.
3. Download the Arlo app and log in on each mobile device that you plan to enable for
geofencing.
For Arlo Geofencing to work on your device, you must adjust the settings on your Android or
iOS mobile device as follows:
Android devices
• Location permission = On

Location services = On

Battery saver = Off

Data limit = Off

Airplane mode = Off

iOS (Apple) devices
• Share my location = On

Location services = Always

Airplane mode = Off

Modes, Rules, and Alerts

34

User Manual

Arlo Essential Series Wire-Free Camera

Set up geofencing for the first time and set up modes
1. Open the Arlo app.
2. Tap Mode.
3. Select your camera or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.
4. Tap Geofencing

.

5. Allow the Arlo app to use your mobile device’s location.
Geofencing works only if Arlo can locate your mobile device. The Location Address page
displays your current address.
6. To change the radius setting, tap Radius and select a radius size.
Radius sizes are Small, Medium, and Large (approximately 150 meters, 250 meters, and
500 meters, respectively).
7. Tap Device Location and enter a name for your location.
8. Tap Away Mode and select a mode.
Your camera uses the Away mode when your mobile device is outside the radius of your
camera’s location. Most people select Armed, Schedule, or Custom Mode so that the
camera detects motion while they’re gone.
9. Tap Home Mode and select a mode.
Your camera uses this mode when your mobile device is within the radius of your camera’s
location. Most people select Disarmed while they’re home.
If you use more than one enabled mobile device, you might be asked to select an Arlo
device to connect it to.
10. To select the preferred mobile device, tap the device and then tap Next.
11. Tap Save.
For troubleshooting tips, see Troubleshoot Arlo Geofencing on page 64.

Geofencing with multiple mobile devices
Arlo Geofencing works with multiple mobile devices.
Arlo uses the first-in, last-out principal to manage households where more than one person
uses geofencing. If everyone leaves home with their mobile devices, this triggers an away
state. Since no one is inside the geofence, your cameras are armed. When the first person
Modes, Rules, and Alerts

35

User Manual

Arlo Essential Series Wire-Free Camera

comes home (first in), their mobile device is now inside the geofence, triggering the home
state and your cameras are disarmed. If one person leaves, but another is still home, the
cameras stay disarmed in the home state until the last person leaves (last out).
We recommend that you enable geofencing only for the mobile device that each person
carries every day. For example, if you use a smartphone and a tablet, and you take your phone
when you leave, set your phone as an Enabled Device in your Geofencing settings. Don’t set
your tablet as an enabled device, because Away mode won’t be triggered when you go out
and leave your tablet home.
The Geofencing mode only changes from Home to Away when all enabled mobile devices are
outside the Device Location in your Geofencing settings.
To review which mobile devices participate in geofencing, open the Arlo app and check the
Enabled Devices page in Geofencing settings (in the Modes section of the Arlo app). Remove
any devices that you don’t want to trigger Home/Away mode changes.
Make sure that these conditions are met:

Your Arlo devices are online.

Geofencing is enabled.

Your friends’ and family’s mobile devices are added to your account.
For information about adding devices, see Enable or disable geofencing for friends’ mobile
devices on page 36.

(Required when your friend wants to participate in geofencing.) Your friend is logged in to
the Arlo app on his or her mobile device and the GPS or location service is enabled on your
friend’s mobile device.

Enable or disable geofencing for friends’ mobile devices
1. Open the Arlo app.
2. Tap Mode.
3. Select your camera or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.
4. Tap Edit

next to Geofencing.

5. Tap Enabled Devices.
A list of mobile devices displays. A check mark appears next to the device name when
geofencing is enabled.
6. Tap one or more mobile devices.

Modes, Rules, and Alerts

36

User Manual

Arlo Essential Series Wire-Free Camera

The device location displays as either In Zone, Out of Zone, or Unavailable (if there’s an
issue contacting that device).
7. To disable geofencing, tap the mobile device again.
The check mark disappears when geofencing is disabled.
For more information, see Set up Arlo Geofencing on page 33.

Custom modes
You can add modes in addition to the modes that come with the Arlo app and give the new
modes custom names, such as Vacation. You can create one rule for each mode. You can
create multiple rules within the same mode, so that each camera performs different actions
and sends different alerts. You can also use Schedule mode to activate modes automatically
at different times of the day or week. (See Schedule when your camera is armed on page 32.

Add a mode
1. Open the Arlo app.
2. Tap Mode.
3. Select your camera or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.
4. Tap Add a Mode.
5. Enter the mode name and tap Next.
6. Select the trigger device and tap Next.
This is the camera that detects motion.
7. Enter the trigger device settings for the When motion is detected section and then tap
Next.
8. Use the slider to set the motion sensitivity for the trigger device and tap Next.
Higher motion sensitivity settings usually trigger your camera to capture videos more
frequently.
9. Select an action device and tap Next.
This is the Arlo device that performs an action when the trigger device detects motion. You
can select the same Arlo device you’re using as a trigger or a different Arlo device.

Modes, Rules, and Alerts

37

User Manual

Arlo Essential Series Wire-Free Camera

10. Select an action such as Record video and tap Next.
If you’re using a computer web browser, you can also specify the recording time setting.
11. Select the notifications for Arlo to send when motion is detected and then tap Next.
12. Review your settings and tap Save.

Modes, Rules, and Alerts

38

User Manual

6. Change Your Settings
Once you set up your Arlo account, you can access it by using the Arlo app on a smartphone
or tablet, or from a computer using a web browser. If you’re using a computer, enter https://
my.arlo.com/#/login in the address bar of the browser.

Two-step verification
Two-step verification helps protect your account by adding another layer of security when you
log in to your Arlo account. Arlo will verify your identity anytime you sign in with a new device.
You can have up to five different two-step verification methods, in addition to the email
address associated with your Arlo account.
Note: If you’re a Friend on someone’s Arlo account, and the account owner sets up two-step
verification, you don’t have to use two-step verification to log in. Likewise, if you set up twostep verification as a Friend on an Arlo account, the account owner is not affected.
To sign in with two-step verification, you must first enter your email address and password.
Then, you must authenticate your identity with a security code (delivered by SMS text
message or email) or confirmation from an already trusted device. Requiring two pieces of
information helps to prevent any unwanted log in, even if someone has your Arlo account
password.

Push notification. When someone attempts to log in to your Arlo account on a new device,
Arlo sends a push notification to a previously trusted (and currently logged in) iOS or
Android device. Tap the push notification on the trusted device to approve or deny the log
in.

SMS text message. When someone attempts to log in to your Arlo account, Arlo sends a
text message to the phone number that you verified for two-step verification. Enter the
security code from the text message to complete the log in.

Email. If you can’t access a trusted device with push notifications, or if you can’t receive
SMS text messages, you can request to have a security code sent to the email associated
with your Arlo account.

39

Arlo Essential Series Wire-Free Camera

Set up two-step verification
1. Open the Arlo app.
2. Tap Settings.
3. In the ACCOUNT section, select Profile > Login Settings > Two-Step Verification.
4. Tap the switch next to Enable.
5. Select your verification method.
Note: Your Arlo account email is an automatic back-up option.
6. Follow the instructions in the app to complete your two-step verification setup.

Add a phone number or device to two-step verification
1. Open the Arlo app.
2. Tap Settings.
3. In the ACCOUNT section, select Profile > Login Settings > Two-Step Verification.
4. To add a phone number, tap Add SMS Verification and enter the phone number.
5. To add a trusted device, tap Add Trusted Device.

Remove a phone number or device from two-step verification
1. Open the Arlo app.
2. Tap Settings.
3. In the ACCOUNT section, select Profile > Login Settings > Two-Step Verification.
4. Tap the trashcan icon next to a phone number or trusted device.

Use face or fingerprint authentication
You can use Touch ID® or Face ID® with a compatible Apple device. With a compatible Android
device, you can use fingerprint authentication.
Your device must meet the following minimum requirements:

Apple devices:
iOS version 10.3 or higher
A Touch ID compatible device (iPhone 5s, iPad Air 2, or newer)

Change Your Settings

40

User Manual

Arlo Essential Series Wire-Free Camera

A Face ID compatible device (iPhone X, iPad Pro 2018, or newer)

Android devices:
Android OS version 6.0 or higher
A compatible Android device with fingerprint authentication

Turn fingerprint authentication on and off for the Arlo app
1. Enable fingerprint authentication on your iPhone or Android device.
2. Open the Arlo app.
3. Tap Settings.
4. In the ACCOUNT section, select Profile > Login Settings.
5. Slide the toggle for fingerprint or Touch ID to the right (on) or left (off).

Turn face authentication on and off for the Arlo app
1. Enable Face ID authentication on your iPhone.
2. Open the Arlo app.
3. Tap Settings.
4. In the ACCOUNT section, select Profile > Login Settings.
5. Slide the toggle Face ID to the right (on) or left (off).

Customize your profile
You can enter your name, add a profile photo and home address, and opt-in or opt-out of Arlo
news and support updates.

Add a profile picture
1. Open the Arlo app.
2. Tap Settings.
3. In the ACCOUNT section, select Profile > Edit Profile.
4. Tap the profile picture at the top of the page.
5. Select Take Photo or Choose from Library.
Note: If you already have a profile picture, you can also select Remove Current Photo.
Change Your Settings

41

User Manual

Arlo Essential Series Wire-Free Camera

6. Upload your preferred profile picture.
7. Tap Save at the bottom of the page.

Edit profile settings
You can enter your name, add a profile photo and home address, and opt-in or opt-out of Arlo
news and support updates.
1. Open the Arlo app.
2. Tap Settings.
3. In the ACCOUNT section, select Profile > Edit Profile.
4. Enter your profile settings.
5. Tap Save at the bottom of the page.

Change your Arlo password
You can change your password in the Arlo app or by logging in to my.arlo.com.
1. Open the Arlo app.
2. Tap Settings.
3. In the ACCOUNT section, select Profile > Login Settings.
4. Enter your old password.
5. Enter a new password and then confirm it.
6. Tap Change Password.
Your new password is saved.

Reset a forgotten password
If you forgot your Arlo password, you can reset it with a verified email address.
1. Open the Arlo app.
2. Tap Forgot Password?.
3. Enter your email address.
4. Tap Send Email.
An email is sent from [email protected] to your verified email address.
Change Your Settings

42

User Manual

Arlo Essential Series Wire-Free Camera

5. Tap the link provided in that email.
6. Enter a new password.
7. Tap Submit.
Your password is reset.

Grant access to friends
You can add friends to your Arlo account. Friends can view live streams from your cameras;
record video clips; view, share, mark as favorite, and delete clips from your library; and take
snapshots. Friends are granted limited access to some of the settings and features of your
Arlo account. You can select which cameras friends can see and what administrative rights are
available to them.
Friends without access rights can:

Play and view library content.

View live footage.

Zoom and drag video footage.

Control brightness.

Enter full-screen view.

Friends who are granted access rights can also:

Play and pause video footage.

Record video footage.

Mute the speaker.

Access and change modes.

View motion detection statuses.

Manually record.

Take snapshots.

Mark as a favorite, share, download, and delete video footage.

Use a camera’s microphone.

Add a friend
1. Open the Arlo app.
2. Tap Settings.

Change Your Settings

43

User Manual

Arlo Essential Series Wire-Free Camera

3. Under ACCOUNT, tap Grant Access.
4. Tap Add or +.
5. Enter your friend’s first name, last name, and email address.
6. Tap the Arlo devices that you want your friend to access.
7. To grant access rights to your friend, tap Allow Access Rights.
Selecting Allow Access Rights allows this friend to change your account and camera
settings.
8. Tap Send Invite.
An email message is sent inviting your friend to create an Arlo account. This friend’s name
is displayed with the status Pending. When the friend accepts your invitation, the status
changes to Accepted.

Edit a friend’s access privileges
1. Open the Arlo app.
2. Tap Settings.
3. Under ACCOUNT, tap Grant Access.
A list of your friends displays with the status of their accounts.
4. Tap the friend, and tap Edit

.

5. Tap cameras to select or deselect them.
6. Tap Allow Access Rights.
Selecting Allow Access Rights allows this friend to change your account and camera
settings.
7. Tap Done.

Delete a friend
1. Open the Arlo app.
2. Tap Settings.
3. Under ACCOUNT, tap Grant Access.
4. Select the friend, and tap Edit

.

5. Tap Delete Friend.

Change Your Settings

44

User Manual

Arlo Essential Series Wire-Free Camera

6. Tap Yes.

Change the time zone
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the camera.
4. Tap Time Zone.
5. Tap a time zone.
If you’re using a mobile device, your settings are saved.
6. If you’re using a computer, click Save.

Camera settings
You can view or change the settings for each camera using either of these methods:

Tap Settings > My Devices and select the camera

Tap the Menu icon

or the Device Settings icon

below the camera feed.

Change the camera name
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the camera.
4. Tap Edit

next to the camera name.

5. Enter a new name that reminds you of the camera’s location, such as Garage or Front
Door.
Camera names are limited to 32 characters.
6. Tap Save.

Turn off the camera LED
The LED on the camera lights in different colors. (See Check the LED on page 12.) You can
turn off this LED.
1. Open the Arlo app.
Change Your Settings

45

User Manual

Arlo Essential Series Wire-Free Camera

2. Tap Settings > My Devices.
3. Tap the camera.
4. Tap Camera LED.
5. Tap Battery Fully Charged Indicator to turn the LED off and on.
If you’re using a mobile device, your settings are saved.
6. If you’re using a computer, click Save.

Video Settings
Change the video quality and battery usage
You can set the video resolution as Best Video, Optimized, or Best Battery Life. Using the Best
Battery Life setting reduces the WiFi bandwidth that is required.
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the camera.
4. Tap Video Settings > Power Management.
5. Tap to select Best Video, Optimized, or Best Battery Life.

Change the Low Light settings for an Essential Spotlight Camera
or Essential XL Spotlight Camera
The Essential Spotlight Camera and Essential XL Spotlight Camera include an integrated
spotlight. This spotlight is set to automatically turn on when your camera detects motion at
night. The spotlight improves video quality and allows your camera to record video in color at
night rather than in traditional black and white. You can turn the spotlight on and off and you
can adjust the spotlight behavior and brightness.
Note: You can manually turn the spotlight on and off at any time from the camera feed by
tapping Spotlight . You can also use the Low Light settings to control whether the spotlight
comes on automatically when your camera detects motion at night.
To change the low light settings for the spotlight:
1. Open the Arlo app.

Change Your Settings

46

User Manual

Arlo Essential Series Wire-Free Camera

2. Tap Settings > My Devices.
3. Tap the Essential Spotlight Camera.
4. Tap Video Settings > Low Light Settings.
5. Adjust the settings to customize your spotlight:

Spotlight. Toggle the spotlight on and off. When the Spotlight setting is set to the On
position, the spotlight automatically turns on when your Arlo camera detects motion
at night.

Color. Toggle color video recording at night on and off.

Behavior. Select the spotlight behavior that you prefer: Constant, Flash, or Pulsate.

Brightness. Use the slider to adjust the brightness level

Night Vision. Toggle Night Vision on and off.

Adjust the audio settings
You can adjust the settings to turn the microphone off and on, and adjust the speaker.
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the camera.
4. If you’re using a mobile device, tap Audio Settings.
5. Adjust the settings:

Microphone toggle turns the microphone off and on.

Speaker toggle and volume. To turn the speaker off and on, tap Speaker. To change
the speaker volume, move the Speaker Volume slider.

Adjust the flicker setting
The combination of certain artificial light sources and the camera shutter speed might cause
flickering in the recorded video. The default setting is Auto, but you can change the flicker
adjustment.
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select your camera or your optional Arlo SmartHub or base station, if you use one.

Change Your Settings

47

User Manual

Arlo Essential Series Wire-Free Camera

4. Tap Flicker Adjustment.
5. Tap a setting.

Restart the camera from the Arlo app
Note: If you paired your camera to an optional SmartHub or base station, you can use the
Arlo app to restart the SmartHub or base station, but not the camera.
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select the camera.
4. Scroll down to the bottom of the page and tap Restart.

View device information
You can view the firmware version, hardware version, and the serial number.
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the device.
4. Tap Device Info.

Remove a device from your account
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the camera.
4. Scroll down and tap Remove Device.

Optional SmartHub and Base Station settings
You can pair your camera to an optional Arlo SmartHub model VMB5000 or VMB4540 or Base
Station with Siren model VMB4500 or VMB4000. The Arlo app lets you specify SmartHub or
base station settings.

Change Your Settings

48

User Manual

Arlo Essential Series Wire-Free Camera

Change your SmartHub or base station name
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the SmartHub or base station.
4. Tap Edit

next to the name.

5. Enter a new name.
6. Tap Save.

Restart your SmartHub or base station
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the SmartHub or base station.
4. Scroll down and tap Restart.

Turn the base station siren on and off
By default, the base station siren is set to the loudest volume, which is over 100 decibels. You
can set up motion detection rules to trigger the base station siren and select the siren volume
level when you set up the rule. The base station siren settings are Loud, Very Loud, and
Extremely Loud. See Add a rule with an optional base station siren trigger on page 31.
WARNING: The loudest siren setting, which is the default for the siren, is more than 100
decibels. Do not test the siren while people or pets are close to the base station. Prolonged
exposure to the siren might cause hearing damage.
To turn the base station siren on and off using the Arlo app
1. Open the Arlo app.
2. Tap Turn Siren ON.
3. Tap Yes to confirm that you want to turn on the siren.

Change Your Settings

49

User Manual

Arlo Essential Series Wire-Free Camera

Base station siren button
The Base Station with Siren model VMB4000 has a button located on
the top.
WARNING: The loudest siren setting, which is the default for the
siren, is more than 100 decibels. Do not test the siren while people
or pets are close to the base station. Prolonged exposure to the
siren might cause hearing damage.
Pressing this button turns the siren on and off.

Change Your Settings

50

User Manual

7. SmartHub SD Card Storage
The SmartHub model VMB5000 supports SD card storage. If you use your camera with the
SmartHub VMB5000, you can use this feature.
You can insert a microSD card into the slot in your SmartHub VMB5000 and store your Arlo
recordings both in the cloud and on the SD card. If the SmartHub isn’t connected to the
internet, recordings continue to be saved on the microSD card. If you have an active live
stream connection between an Arlo camera and a SmartHub, you can record to a microSD
card. Your Arlo app notifies you when the SD card is low on storage space or is full.

MicroSD card format
Your SmartHub accepts SDHC or SDXC microSD cards. We recommend using microSD cards
with a minimum of 16 GB capacity, Speed Class 10, UHS-1, V10. Your Arlo SmartHub supports
up to Class 10 UHS-3 V90.
If your microSD card isn’t formatted, or is formatted with an incompatible file system, you can
use your Arlo app to format the microSD card. See Format a microSD card on page 53.

Insert a microSD card
1. Insert the microSD card into the slot on the bottom of the SmartHub.

2. Press the edge of the microSD card until it’s completely seated in the slot.

51

Arlo Essential Series Wire-Free Camera

View the SD card status
1. Open the Arlo app.
2. Tap SmartHub/Base Station/Bridge.
3. Check the SD card icon
amber .

. When a microSD card is inserted in the SmartHub, this icon is

4. To view more information about the microSD card status, under LOCAL STORAGE, tap
Storage Settings.
The SD Card Status displays GOOD or indicates if the SD card needs to be formatted, or is
full. The Arlo app also notifies you if the card needs to be formatted or is full.

View available SD card storage
The Arlo app notifies you if the SD card is getting full, but you can also view the available
storage.
1. Open the Arlo app.
2. Tap SmartHub/Base Station/Bridge > Storage Settings.
The Available Storage field displays the amount of storage available on the SD card.

Turn SD card recording off and on
1. Open the Arlo app.
2. Tap SmartHub/Base Station/Bridge
3. Select the SmartHub.
4. Tap Storage Settings > SD Card Recording.
SD card recording toggles off and on.

Change the SD card overwrite setting
By default, if the SD card fills up, the oldest Arlo recording is erased to make room for new
recordings. Files on the SD card that aren’t in the Arlo folder aren’t deleted to make room
for Arlo recordings. You can change the setting so that no Arlo recordings are automatically
erased.
1. Open the Arlo app.
2. Tap Base Station & Bridge > Storage Settings.
SmartHub SD Card Storage

52

User Manual

Arlo Essential Series Wire-Free Camera

3. Tap Overwrite Automatically.
The overwrite setting toggles off and on.

Format a microSD card
Your SmartHub accepts micro SD cards, SDHC or SDXC only, file format FAT32. The Arlo app
displays a message to let you know if you need to format the SD card. The SmartHub can
format the SD card.
1. Open the Arlo app.
2. Tap SmartHub/Base Station/Bridge > Local Storage.
3. Tap the red Format SD Card button.

Safely eject an SD card
It’s important to safely remove the microSD card from your SmartHub. If you remove an
SD card while information is being recorded on it, the SD card might become permanently
unusable or the files on the card might be corrupted.
1. Open the Arlo app.
2. Tap SmartHub/Base Station/Bridge > Local Storage.
3. Tap Safely Eject SD Card.
4. Wait for the Unmounting SD Card progress message to close.
5. Remove the SD card from your SmartHub by pressing in on the edge of the card until it
ejects.
Do not interrupt power to the SmartHub or remove the SD card until the progress message
closes.
6. The SD card icon changes from amber
to gray
indicating that no microSD card is in
the slot.
Arlo SD card recording is disabled until you insert another SD card.

View videos on a microSD card
To view Arlo videos saved on a microSD card, you must remove the microSD card from your
SmartHub and use a microSD card reader.

SmartHub SD Card Storage

53

User Manual

Arlo Essential Series Wire-Free Camera

The microSD card reader can be part of your computer or a memory card reader with a USB or
micro USB connector. If you purchase an SD card reader, make sure that you choose one that
can read microSD cards.
1. Safely eject the microSD card.
For more information, see Safely eject an SD card on page 53.
2. Insert the microSD card into the slot in your card reader.
3. Wait for the microSD card to appear in the list of available drives on your computer, and
then open the drive folder to view the files on your microSD card.
4. Open the Arlo folder.
Recorded videos are saved in this folder in MP4 format. Video files are named according
to this system: camera serial number_video number_date_video clip tag. Dates are in the
format YYYYMMDD.
Note: If you’re unable to play MP4 files on your computer, update your media player software
to the latest version and try again. You can also download a free universal multimedia player,
such as VLC.

SmartHub SD Card Storage

54

User Manual

8. SmartHub or Base Station USB
Storage
The Arlo SmartHub VMB4540 and Base Station with Siren VMB4500 and VMB4000 include one
or two USB ports on the rear panel. If you use your camera with a SmartHub or base station
you can use this feature.

SmartHub VMB4540

Base station VMB4500

Base station VMB4000

You can connect a USB storage device to the USB port and store your Arlo recordings both in
the cloud and on the USB device.
If the SmartHub or Base Station with Siren isn’t connected to the internet, recordings continue
to be saved on your USB storage device. Your Arlo app notifies you when the connected USB
storage device is low on storage space or is full.

USB storage device format
The SmartHub supports these file formats for local storage:

FAT16

FAT32

ExFAT

ext2FAT

55

Arlo Essential Series Wire-Free Camera

ext3FAT

ext4FAT

HFS+

The minimum USB drive size is 16 GB and the maximum-size drive that those file systems
support is 2 TB. The SmartHub supports USB 2.0-compatible devices. Not all HDDs are
compatible with the SmartHub. If you’re not sure, consult the manufacturer of the HDD.

View the USB storage device status
1. Open the Arlo app.
2. Tap SmartHub/Base Station/Bridge.
3. Check the color of the USB icon

:

Gray. No USB device is connected.

Black. A USB device is connected to the SmartHub.

Amber. The SmartHub is recording onto the USB device.

4. To view more information about the USB device status, under LOCAL STORAGE, tap
Storage Settings.
The USB status displays GOOD or indicates if the USB device needs to be formatted, or is
full. The Arlo app also notifies you if this occurs.

View available USB device storage
The Arlo app notifies you if the USB device is getting full, but you can also view the available
storage.
1. Open the Arlo app.
2. Tap SmartHub/Base Station/Bridge > Storage Settings.
The Available Storage field displays the amount of storage available on the USB device.

Turn USB recording off and on
1. Open the Arlo app.
2. Tap SmartHub/Base Station/Bridge
3. Select the SmartHub.
4. Tap Storage Settings > USB Device Recording.
SmartHub or Base Station USB Storage

56

User Manual

Arlo Essential Series Wire-Free Camera

Change the USB device overwrite setting
By default, if the USB storage device fills up, the oldest Arlo recording is erased to make
room for new recordings. Files on the USB device that aren’t in the Arlo folder aren’t deleted
to make room for Arlo recordings. You can change the setting so that no Arlo recordings are
automatically erased.
1. Open the Arlo app.
2. Tap Base Station & Bridge > Storage Settings.
3. Tap Overwrite Automatically.
The overwrite setting toggles off and on.

Format a USB device
The Arlo app displays a pop-up message to let you know if it is necessary to format the USB
storage device. The SmartHub can format the USB storage device.
Do not remove the USB storage device while it is formatting. The USB storage device might
become permanently unusable.
1. Open the Arlo app.
2. Tap SmartHub/Base Station/Bridge > Local Storage.
If you see the message Requires Formatting, the USB storage device isn’t in the correct
format and you must format it before you can use it for local storage.
3. Tap the Format USB Device button.
4. Wait for USB Device Status to change from Formatting to Ready.

Safely eject a USB storage device
If you remove a USB device while information is being recorded on it, the USB device might
become permanently unusable or the files on the USB device might be corrupted.
1. Open the Arlo app.
2. Tap SmartHub/Base Station/Bridge > Local Storage.
3. Tap Safely Eject USB Device.
4. Wait for the Unmounting USB storage device progress message to close.
5. Disconnect your USB storage device from your SmartHub.
SmartHub or Base Station USB Storage

57

User Manual

Arlo Essential Series Wire-Free Camera

Do not interrupt power to the SmartHub or remove the USB device until the progress
message closes.
6. The USB icon changes to gray
indicating that no USB device is connected.
USB recording is disabled until you connect another USB device.

View videos on a USB device
Video clips on USB storage devices don’t display in the Arlo app, but you can use a Windowsbased or Mac computer to view the clips.
1. Safely eject the USB storage device.
For more information, see Safely eject a USB storage device on page 57.
2. Connect the USB storage device that you ejected to a Windows-based or Mac computer.
3. Wait for the USB storage device to appear in the list of available drives on your computer,
and then open the drive folder to view the files on your USB storage device.
4. Open the Arlo folder.
Recorded videos are saved in this folder in MP4 format. Video files are named according
to this system: camera serial number_video number_date_video clip tag. Dates are in the
format YYYYMMDD.
Note: If you’re unable to play MP4 files on your computer, update your media player software
to the latest version and try again.

SmartHub or Base Station USB Storage

58

User Manual

9. Arlo Connect
Use Arlo with Amazon Alexa
With the Arlo Skill and Alexa, you can access your Arlo devices using voice commands and
view a live camera feed on your Echo Show, Fire TV, or Fire tablet. Alexa can also notify you
when motion is detected by your Arlo cameras.
To use the Arlo Skill, you need a connected camera and one of these Amazon devices:

Echo Show

Echo Spot

Echo Dot

Echo, Echo Plus

Fire tablets (7th generation or newer)

Fire TV (all generations)

Fire TV stick (second generation only)

Fire TV Edition smart TVs

Enable the Arlo Skill
Make sure that your camera is powered on and connected to the cloud.
Enable the Arlo skill in one of these ways:

Tell Amazon Alexa, “Alexa, enable Arlo skill” to receive instructions in your Alexa app to
link your Arlo account with your Alexa account.

In the Alexa app, search for the Arlo Skill and select Enable Skill to link your Arlo account
with your Alexa account.

Use the Arlo Skill
After you enable the Arlo Alexa Skill, you can try using these commands:

“Alexa, show me <camera name>.” Start streaming a camera live.

59

Arlo Essential Series Wire-Free Camera

“Alexa, stop.” Stop an activity and return to your device’s home screen.

“Alexa, hide <camera name>.” Stop streaming from a camera and return to your device’s
home screen.

“Alexa, go home.” Return to your device’s home screen.

“Alexa, show the last motion detected by my <camera name>.”
To use this command, your Arlo subscription must include viewing past video clips for
your camera.

Set up Alexa to notify you when the camera detects motion
You can use either of these methods:

In the Smart Home section of the Alexa app, turn on Announcements for your Arlo camera.

Create an Alexa Routine from the Alexa app main menu.

Add your camera to the Google Assistant app
To use your camera with Google Assistant, you need:

A Google Home Hub, a Chromecast device, a TV with Chromecast, or a media player with
Chromecast

The Google Assistant app on your mobile device. This app is included with most Android
devices, but you can also download it from the Apple App Store on iOS devices.

To connect your Arlo cameras to the Google Assistant app:
1. If you plan to use a voice-enabled speaker with the Google Assistant, set up that device.
2. Open the Google Assistant app to the home page.
3. Tap the + icon.
4. Tap Set up Device > Have something already set up?.
5. Select the Arlo icon from the list of device options.
You can search for Arlo or scroll down to find Arlo on the list of devices.
6. Sign in with your Arlo account.
Your camera is added to Google Assistant.
7. To test your camera, say “Hey Google, show [name of room where camera is placed] on
[name of Google device].”
8. To end the stream, say “Hey Google, stop [name of Chromecast device].”

Arlo Connect

60

User Manual

Arlo Essential Series Wire-Free Camera

For more information, see Google Assistant Help: Control smart home devices.

Use Arlo with IFTTT
You can use the Arlo app with IFTTT (If This Then That), a free cloud-based service that
connects smart home devices and applications.
To add Arlo to your IFTTT app, visit ifttt.com/arlo.
To learn more about Arlo and IFTTT, visit arlo.com/community.

Arlo Connect

61

User Manual

10.Troubleshooting
Scan a QR code during setup
During setup, the camera must scan a QR code from the Arlo app when you’re adding the
camera to your 2.4 GHz WiFi network. If your camera doesn’t emit a chime sound after
scanning the QR code, then the QR code wasn’t successfully scanned.
If your camera didn’t scan the QR code:

Move your mobile device farther from or closer to the camera lens.
Position your mobile device about 6 in. (15 cm) from the camera lens, and slowly move it
closer. If that doesn’t work, try moving your mobile device farther away. You can also try
different angles.

Decrease or increase the brightness on your mobile device.
Your mobile device’s brightness might be too high or low for your camera to scan the QR
code.
If it’s dark outside, try setting the brightness on your mobile device to the 50% level.
If it’s bright outside, try raising the brightness on your mobile device to the highest level.

Disable Dark Mode if you’re using an iOS device.
In your iOS Settings, scroll down to find and select Display & Brightness. Choose Light
mode under the Appearance options.

Scan the QR code in an evenly lit area.
Avoid scanning the QR code in the dark or in direct sunlight. If you are installing at night,
turn on porch lights. If your camera is exposed to direct sunlight during installation,
provide some shade.

Try using a mobile device with a larger screen such as a tablet or iPad, if available.

Clean the camera lens.
The camera lens might have debris or a smudge on it, hindering its ability to scan the QR
code. Try using a lint-free cloth to remove anything that might prevent the camera from
scanning the QR code.

62

Arlo Essential Series Wire-Free Camera

Arlo doesn’t discover your camera during setup
If you’re trying to set up and connect your Arlo camera directly to your WiFi router—without
an Arlo SmartHub or base station—and Arlo doesn’t discover your camera, here are some
things to check to identify and correct the problem.
When you’re using the Arlo app to add your camera, check the following:

Make sure that you select the correct camera model after you tap Add Device in the Arlo
app. The Arlo app only tries to discover the Arlo device that you select.

Arlo Essential Spotlight Camera & Essential XL Spotlight Camera. Select this option
if you have an Arlo Essential Spotlight Camera (VMC2030) or an Arlo Essential XL
Spotlight Camera (VMC2032).

Essential Camera. Select this option if you have an Arlo Essential Camera (VMC2020).

To find your camera’s model number, check the box that your camera came in.

Your Arlo camera and mobile device are connecting to the same 2.4 GHz WiFi network.
Your camera can only connect to a 2.4 GHz band, not a 5 GHz band. For more information,
see Connect your mobile device to a 2.4 GHz WiFi network during setup on page 17.

You’re entering the correct WiFi network SSID (network name) and password. The network
SSID and password are case-sensitive and must be exactly correct. You can tap the
password eye icon to view your password before submitting.

Your mobile device and Arlo camera are within the WiFi signal range of your WiFi router.
During setup, we recommend placing your camera within 10-15 feet (3-4.5 meters) of
your WiFi router. After the camera is set up and connected, you can move the camera
anyplace within range of your WiFi router. For more information, see Tips for optimal WiFi
performance on page 16.

Check the camera LED. When you press the sync button during setup, the LED blinks blue
for two minutes while the camera is being discovered and then blinks blue fast when
it connects to your WiFi network. If the camera doesn’t connect to your WiFi network
within two minutes, it times out and the LED stops blinking. If the camera times out, press
the sync button again. Make sure that the LED blinks blue during the entire connection
process. Check the LED on page 12.

You hear a chime noise, which indicates your camera successfully scanned the QR code.
If you don’t hear a chime noise and need help with scanning the QR code, see Scan a QR
code during setup on page 62.

Troubleshooting

63

User Manual

Arlo Essential Series Wire-Free Camera

Troubleshoot Arlo Geofencing
Note: Selecting Modes > Arm All Devices or Disarm All Devices deactivates Geofencing mode.
To activate Geofencing mode, tap Modes, select your Arlo device, and then select Geofencing.
Each Arlo user has a unique setup environment. These are the most common geofencing
issues.

Your mobile device isn’t sharing its location information with Arlo. See Prepare your mobile
device for geofencing on page 34.

Away mode isn’t triggered when you leave because an extra mobile device that’s enabled
for geofencing is still in the Device Location. See Geofencing with multiple mobile devices
on page 35.

Geofencing stopped working because the location sharing settings for a mobile device
changed. See Prepare your mobile device for geofencing on page 34.

A task-killing app is interfering with Arlo Geofencing. A task-killing app, such as Shutapp or
Doze, can disable Arlo Geofencing. To use Arlo Geofencing, disable any apps that suppress
the Arlo app.

Geofencing for your mobile device on your friend’s Arlo account isn’t working.
If you’re a friend on someone else’s Arlo account, your mobile device can only change
Home/Away modes if the Arlo account owner does the following:

Turn on the Allow Access Rights setting. See Grant access to friends on page 43.

Set your device as an Enabled Device in Geofencing settings. See Enable or disable
geofencing for friends’ mobile devices on page 36.

Still experiencing issues with geofencing? Contact Arlo Customer Support.

Can’t see video streams in a browser
Your router might be blocking the ports to which Arlo sends data. To make sure that Arlo can
stay connected, you must keep ports 443 and 80 open on your router.
To troubleshoot problems with the video stream, check for the conditions in these sections:
WiFi signal interference on page 64, Out of range on page 65 and Low battery on page
65.

WiFi signal interference
Environments with multiple WiFi networks, WiFi devices, or frequencies can cause signal
interference. If possible, minimize the number of networks, WiFi devices, and transmitted

Troubleshooting

64

User Manual

Arlo Essential Series Wire-Free Camera

frequencies in the area where you place your camera. For help with adjusting WiFi settings
such as the channel for your router, check the instructions that came with your router or
contact your internet service provider (ISP) if they installed your router.
We recommend that you place your camera at least 1 to 3 feet (30 to 100 centimeters) from
your router or Arlo SmartHub or base station if you use one. Allow at least 6½ feet (2 meters)
between each camera to prevent WiFi signals between the devices from interfering with each
other.

Out of range
Make sure that your camera is close enough to receive a strong WiFi signal. The range of your
router’s WiFi signal can vary depending on the router model and conditions in your local
environment.
Make sure that your camera displays three or four bars of signal strength in the area where
you intend to install it. The camera can work when signal strength is at one or two bars, but
might go out of range intermittently due to fluctuations in the environment.

Low battery
A low battery can cause the camera to stream intermittently. If the battery’s charge level is
25%, the Arlo app displays a notificaiton message. At 15%, the app sends you an email and a
push notification.

Not receiving push notifications
You must be logged in to the Arlo app to receive Arlo alerts on your smartphone or mobile
device. Arlo registers your device for push notification when you log in. If you used the logout
option instead of simply exiting the app, you must log back in to the app. You receive Arlo
alerts even if your device is sleeping.

Check the rules for armed modes
Check the rules in your modes. Make sure that push notification is enabled in the mode you’re
using.
1. Open the Arlo app.
2. Tap the Mode button.
3. Select your camera, or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.

Troubleshooting

65

User Manual

Arlo Essential Series Wire-Free Camera

4. Tap Edit

next to Armed.

5. Tap Edit

next to the rule.

6. Under Alert, make sure that the Push Notification check box is selected.
7. If you made changes, tap Save.

Check the Arlo app notification settings on an iOS device
Make sure that you allow the Arlo app to receive push notifications. The Arlo app push
notifications can be disabled on iOS and Android devices.
1. Tap the Settings icon for your iOS device.
2. Tap Notifications > Arlo.
3. Make sure that Allow Notification is selected.

Check the Arlo app notification settings on an Android device
Make sure that you allow the Arlo app to receive push notifications. The Arlo app push
notifications can be disabled on iOS and Android devices.
1. Tap the Settings icon for your Android device.
2. Tap Application Manager > Arlo.
3. Make sure that the Show Notifications setting is selected.

If you said no to push notifications at installation
When you install the Arlo app for the first time, to receive alerts, you must select Allow when
asked if you want Arlo to send you push notifications. For iOS apps, after you respond to this
alert, it isn’t presented again unless the device is restored to factory settings or the app is
uninstalled for at least a day.
If you said no on an iOS device, uninstall the app, wait for a day, and then reinstall it, and
allow notifications. If you don’t want to wait a day before you reinstall the app, you can use
the system clock on your device to simulate a day. Set the system clock forward a day or
more, turn your device off, and then turn the device back on. After you reinstall the app, return
the system clock to the correct setting.

Troubleshooting

66

User Manual

Arlo Essential Series Wire-Free Camera

Use the sync button to reset the camera
The button on the bottom of your camera is the sync button.
Sync button
Charging port cover

You can use the sync button for either of these types of resets:

Reset your camera to its factory settings. See Reset the camera to its factory settings.

Power cycle and reset your camera to its factory settings. See Power cycle and reset the
camera to its factory settings on page 68.

Note: The sync button is also used to wake the camera when it is shut down and to pair the
camera with a WiFi network. We recommend that you follow the instructions in the Arlo app
to wake and pair your camera.

Reset the camera to its factory settings
This process returns the camera to its default settings and removes it from your Arlo account.
This means that you must follow the Arlo app setup process to use your camera after a factory
reset.
1. Press and hold the sync button for about 15 seconds, until the camera LED begins blinking
amber, then let go.
2. Ensure that the camera LED blinks amber three times.
Make sure to let go of the sync button when the camera LED begins blinking amber. If you
hold the sync button too long, you must restart the factory reset process until the camera
LED blinks amber three times after you let go of the sync button.
After a factory reset, the camera still appears in the Arlo app, but it is disabled.
3. To remove the camera from the Arlo app, tap Settings, scroll down, and tap Remove
Device. Close the Device Settings page.
4. To add the camera back to your Arlo account, tap Add New Device on the Devices page
and follow the prompts to connect your camera to your WiFi network and set it up.

Troubleshooting

67

User Manual

Arlo Essential Series Wire-Free Camera

Power cycle and reset the camera to its factory settings
This process performs a hardware reset, which factory resets, power cycles, and shuts down
the camera. To continue using your camera, you must wake the camera and re-add it to your
Arlo account.
1. Disconnect the camera’s USB charging cable if you were using it.
2. Press and hold the sync button for about 20–30 seconds,
The camera LED lights solid blue for 2 seconds, then blinks amber 3 times.
3. Continue holding the sync button through all the LED behaviors, until you have held it for
20–30 seconds.
The camera returns to its factory settings and shuts down. For information about waking
the camera, see Use the sync button to wake the camera on page 11.

Troubleshooting

68

User Manual

Arlo Essential Series Wire-Free Camera

Support
For product updates and web support, visit http://www.arlo.com/en-us/support/.
Arlo Technologies, Inc.
2200 Faraday Ave. Suite 150
Carlsbad, CA 92008 USA
Document publication date: October 2021
PN 202-50022-05

Trademarks
© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are trademarks of Arlo
Technologies, Inc. Apple is a trademark of Apple Inc., registered in the US and other countries.
App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks
of Google LLC. Any other trademarks are for reference purposes.

Compliance
For regulatory compliance information including the EU Declaration of Conformity and where
to find e-label information for US FCC & Industry Canada, visit
www.arlo.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.

Federal Communication Commission Interference Statement:

 

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

Consult the dealer or an experienced radio/TV technician for help.

69

User Manual

Arlo Essential Series Wire-Free Camera

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.

RF exposure statements
This Transmitter must not be colocated or operating in conjunction with any other antenna or
transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20 centimeters between the radiator and your body or nearby persons.

Industry Canada statement:
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the
following two conditions:
1) This device may not cause interference, and
2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le
brouillage est susceptible d’en compromettre le fonctionnement.
Innovation, Science and Economic Development Canada Statement:
This digital apparatus complies with CAN ICES-3(B).
Énoncé d’Innovation, Sciences et Développement économique Canada
Ce périphérique numérique est conforme à la norme CAN ICES-3(B)/NMB-3 (B).
Radiation Exposure Statement:

 

70

User Manual

Arlo Essential Series Wire-Free Camera

This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de
20 cm de distance entre la source de rayonnement et votre corps.

 

71

User Manual

 

Download Manual PDF

Arlo Essential Spotlight Camera – 3 Pack User Manual PDF Download

Leave a comment

Your email address will not be published. Required fields are marked *