Tommee 42371640 Tippee Perfect Prep Machine User Manual

Tommee 42371640 Tippee Perfect Prep Machine User Manual

IMPORTANT WARNINGS!

Keep this instruction sheet for future reference as it includes important informations.

This appliance is intended for household use only. Do not use outdoors. Before plugging in the Perfect Prep
for the first time ensure that the voltage is compatible with your electricity supply by checking the label on the
base of the unit. Ensure water has been added to the unit before switching the unit on. Do not immerse in water. To protect against fire, electric shock and injury to persons. Do not immerse cord, plugs or other parts
of the unit in water or other liquid. Misuse of the product may result in the risk of fire, electric shock and/or
personal injury. This appliance shall not be used by children. Keep the appliance and its cord out of reach of
children. Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. User maintenance other than cleaning and descaling is not required for this product. Cleaning and user maintenance shall not be made by children. Do not touch hot surfaces. When in use the Perfect Prep contains hot water and steam. Keep hands away from dispensing spout as it can cause burns and scalds. Use in a well ventilated area. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in
any manner. If the supply cord is damaged it must be changed by a qualified person in order to avoid a hazard. If the damage is from new the unit must be returned to the manufacturer. If within a retail warranty period this product should be exchanged at place of purchase. The manufacturer will then be made aware. Any questions? Visit our website www.tommeetippee.com Always use on a flat heat resistant surface. Do not move appliance when in use. Do not let the cord hang over edge of kitchen work surface or touch hot surfaces. The product has been fitted with a cord wind on the rear of the unit to allow you to adjust the length of the cord safely. It is recommended that the cord be kept as short as possible. Do not use any accessories other than those supplied with this appliance.

FOR DOMESTIC USE ONLY – NOT INTENDED FOR COMMERCIAL USE

Table of Contents

SET UP

As with any other method of making up a feed, it’s essential that good hygiene practices are observed in the use and maintenance of your Perfect Prep machine. Ensure your hands and all surfaces that come in to contact with the machine and its components are clean, and that the unit is away from direct sunlight and heat sources.

REGULAR CLEANING: For hygiene and safety reasons you should clean your unit on a regular basis. We recommend you carry this out at least every 4 weeks, whenever you replace your filter or if the machine has been unused for a period of 7 days.

Place a container under the dispenser spout to capture the water used to clean the system (ideally at least 1.8 litre capacity).

Plug in the unit, the tank empty warning light will illuminate.

Fill the water tank with freshly boiled water.

Wait for the tank empty warning light to go out. The water tank hot light will illuminate.

Press the cleaning mode button and hold for 2 seconds. The cleaning mode light will illuminate.

Allow the cycle to fully complete with boiled water dispensing into the container that you placed underneath during step 1.

The tank empty warning light will illuminate once the water has flushed through the system.

Discard the contents from the container used and place it back under the dispenser spout.

Without removing the hopper from the machine and still holding the filter by the top, place the filter in the hopper, ensuring it locks into place.

Fill the hopper with cold water.

Wait for the tank empty warning light to go out.

Press the filter volume reset button for 2 seconds to clear the memory.

Set the dial to 4oz with container under the dispenser spout. Press the start/stop button. A red light will flash.

The appliance will dispense an amount of hot water.

Press the start/stop button again. A green light will flash and an amount of water will be dispensed to finish the cycle. Discard the contents of the container. Fit the bottle stand. Your machine is now ready to use.

USAGE

Before each use you must ensure that your water tank is above the minimum fill mark. Always use cold water when filling the water tank, other than when cleaning.

Check the water level and regularly top up when necessary with cold water. When filling the tank with water, ensure the hopper is in place.

Turn the dial to select the feed size you require (4fl oz –11fl oz).

Position your sterilised bottle under the spout. Adjust bottle stand if necessary (bottle neck should sit close to the spout).

Press the start/stop button. A red light will flash and a volume of hot water is dispensed into your
bottle.

The light will change to solid red and there will be a double beep to indicate the end of the first stage.
You will need to make up your feed within 2 minutes.

Carefully remove the bottle from the stand and measure the correct number of formula scoops into the
bottle.

Screw the sterilised milk storage lid onto the bottle and ensure that the
lid is tight. Be careful when handling hot liquid.

Shake well until the formula powder has dissolved.

Remove the milk storage lid and replace your bottle onto the bottle stand.

Press the start/stop button again. The red light will go out and the green light will flash. If this button is
not pressed within 2 minutes of the hot water being dispensed a long beep will sound. If the alarm sounds
you should discard the feed and repeat the process from step 1.

Wait whilst the remainder of water is dispensed. Once completed, there will be a double beep and the green
light will change to solid.

Always check that the amount dispensed is consistent with the size of feed you have selected on
the dial (by adding formula, your feed will appear larger than the feed
size chosen). Add the sterilised teat, screw ring and hood and shake.

For your child’s safety always check food temperature before feeding by
testing on a sensitive part of your skin

Your bottle is now ready to serve. Make sure you discard any unwanted feed as per the formula
manufacturer’s recommendation.

HOW TO KEEP THE TANK COOL

The Perfect Prep should be kept in a cool dry location, avoiding direct sunlight and keeping away from warm
appliances. This is recommended to avoid the water tank temperature getting too warm. Don’t worry if your temperature light does illuminate, as we have some tips for you:

Flush your cold tap for 10 seconds before filling the water tank.
Regularly top up with cold water rather than letting a full tank stand and warm for long periods of time.
Keep a cold jug of tap water in the fridge ready to top up the tank.

HOW TO STOP THE PERFECT PREP™ MACHINE

If at any point you need to stop the Perfect Prep machine you can do so by pressing the start/stop button. The pump may continue to run for a few seconds and the green light will illuminate to show that the process has ended. It will not be possible to restart the machine for 20 seconds. If you have to stop the Perfect Prep machine, please discard of any incomplete feed.

CLEANING

We recommend you complete a cleaning cycle every 4 weeks, whenever you replace your Tommee Tippee water filter or if the machine has been unused for a period of 7 days.
TIP: carry out the cleaning process when your tank empty light is illuminated (L) so there’s no need to discard any water.

Remove lid, hopper (G) and bottle stand (F) and set filter to one side (top side down). Clean the external machine surface with a clean cloth (we advise to use an antibacterial solution), taking care to clean in all grooves and under the dispenser spout (C). At this time the hopper (G), lid and bottle stand (F) should also be cleaned using hot soapy water, rinsed thoroughly, and allowed to dry naturally (do not use
cloths or tea towels to dry).
Plug in the unit, the empty tank warning light will illuminate (L).
a.Using a cold water sterilising solution (following manufacturer guidelines for using 1.8 litres of water) add required amount to the the water tank. Fill the water tank to the max line with cold water and place a
suitable container under the dispenser spout (C). 3.b. An alternative option is to use 1 litre of clear/ white (food grade) vinegar. Top up the water tank to the max line with freshly boiled water and place a suitable container under the dispenser spout (C).
Press the cleaning button (O) on the side of the machine for 2 seconds. The cleaning mode light will illuminate. TIP: If using a container less than 1.8 litres capacity you can press the start button (A) to pause the cleaning cycle, allowing you to discard of the contents.
You can re-start the cycle by pressing the cleaning button again (O). Allow the cycle to fully complete. Discard the contents from the container used.

Once this is done, insert the hopper and follow SET UP steps 1-15 (no need to use step 9a or 12 if refitting current Tommee Tippee filter).

REPLACING YOUR FILTER

We recommend that you complete a cleaning cycle, whenever you replace your Tommee Tippee water filter. Your unit comes with a Tommee Tippee water filter which lasts 150 litres (this is approximately 3 months based on 6 x 260ml feeds per day). Replacement Tommee Tippee water filters are available from all Perfect Prep stockists. Using this machine without a water filter or with a non Tommee Tippee water filter could put your child’s health at risk.

A solid red light will illuminate as an early warning, so you can make sure you have a replacement filter ready for when it needs changing. When the red light flashes, replace the filter.

Place a suitably sized container under the spout (C). Press the cleaning mode button for 2 seconds to empty the tank.

Remove the old filter and discard (dispose of the filter in general household waste).

Follow CLEANING steps followed by SET UP steps 1-15.

DESCALING

The descaling process will remove deposits of calcium and other minerals in the system that may affect its performance.

A red warning light will illuminate when the unit requires descaling soon. If the light flashes, you should descale immediately.

Remove the filter.
Fill the water tank with 0.5 litres of clear white vinegar (food grade).
Place a suitable container under the spout.
Press the descale button for 2 seconds. The system will now run a descale process. During this process the red descale light will continue to flash.
At the end of the descale process a beep will sound and the descale light will switch off.
The red cleaning mode light will now flash.
Follow the SET UP steps 1-15 (no need to use step 9a or 12 if refitting current filter).

DO’S AND DON’TS

DOS

It is essential that good hygiene practices are observed in the use and maintenance of your Perfect Prep machine.

✔ Ensure your hands and all surfaces that come in to contact with the machine and its components (including filter) are clean.
✔ This product is intended for use with Tommee Tippee Closer to Nature Perfect Prep Water Filters which are available from all Perfect Prep machine stockists.
USE OF ANY OTHER WATER FILTER WITH THIS PRODUCT COULD PUT YOUR CHILD’S HEALTH AT RISK.
✔ Before first use clean the unit following the set up steps provided in this leaflet.

✔ Keep the unit away from direct sunlight.
✔ Only use cold tap water during regular use.
✔ Keep the outside of the unit clean.
✔ For your Childs safety always check the food temperature before feeding on a sensitive part of your skin.
✔ Be careful when handling boiling water.
✔ Always adjust the height of the bottle stand so the bottleneck is close to the dispensing spout. This is to maintain the temperature of the water and to avoid any splashes.

✔ Keep well clear of the dispensing spout as the unit produces steam and very hot water

DON’TS

✘ Do not allow the water tank to be contaminated. The inside of the unit should only be cleaned by following the cleaning process steps provided in this leaflet.
✘ Do not clean with solvents or harsh chemicals.
✘ The appliance is intended for use in a kitchen. It is not suitable for use in a nursery.
✘ Do not use hot water other than during cleaning cycles. If water in the tank is higher than 25°C, the unit will not operate. If this happens, either change the water or allow the water to cool and restart.
✘ Do not pour boiling water over the water filter.
✘ When topping up the hopper, do not fill beyond the max line.
✘ Be careful not to spill any water on the outside of the machine.
✘ Do not remove the back panel from the unit.

INFORMATION ON THE DISPOSAL FOR WASTE ELECTRICAL & ELECTRONIC EQUIPMENT (WEEE)
This symbol on the products and accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper disposal for treatment, recovery and recycling, please take these products to designated collection points where they will be accepted on a free of charge basis. In some countries you may be able to return your products to your local retailer upon the purchase of a new product. Disposing of this product correctly will help you save valuable resources and prevent any possible effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest collection point for WEEE. Penalties may be applicable for the incorrect disposal of this product in accordance with national legislation. The product is fitted with a BS 1363 mains plug containing a 13A fuse. If it ever becomes necessary to replace the fuse, only use fuses that are marked BS 1362, and rated at 13A. In the unlikely event that this plug is not suitable for the
sockets in your home, it should be removed and a suitable plug fitted as follows: The wires of the mains lead are coloured in accordance with the following code:
GREEN AND YELLOW – EARTH
BLUE – NEUTRAL
BROWN – LIVE
As these colours may not correspond with the coloured markings sometimes used to identify the terminals in the plug, connect as follows. The wire coloured GREEN AND YELLOW must be connected to the terminal marked E or by the earth symbol or coloured GREEN or GREEN AND YELLOW. The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be connected to the terminal marked L or coloured RED. If you are in any doubt about how to wire a plug or replace a fuse safely, consult a qualified electrician.

Jackel International Limited trading as Mayborn Group, Northumberland Business Park West, Cramlington Northumberland NE23 7RH, UK Made in China

Download Manual PDF

Tommee 42371640 Tippee Perfect Prep Machine
User Manual PDF Download

342